{"title":"Bilstein B8 Shock Absorbers","description":"\u003cp\u003eThe Bilstein B8 is a shortened monotube damper engineered specifically for vehicles that have been lowered with aftermarket springs. Standard-length dampers — including the B4 and B6 — are not designed to operate at reduced ride heights: the stroke geometry is wrong, and ride quality and damper life both suffer. The B8 resolves that by matching Bilstein's gas-pressure monotube performance to the geometry of a lowered car.\u003c\/p\u003e\u003cp\u003eThe B8 is sold as a damper only — you supply the springs. If you want a matched damper-and-spring kit from Bilstein, the B12 combines shortened dampers with Bilstein lowering springs as one engineered unit.\u003c\/p\u003e\u003cp\u003eBefore ordering: confirm your current or intended ride height and spring choice. The B8 is not suitable for stock-height vehicles. Final ride height depends on the spring you fit, not the B8 damper itself.\u003c\/p\u003e\u003ch2\u003eIs this the right range for you?\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eI want…\u003c\/th\u003e\n\u003cth\u003eRight range\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOE replacement, car stays at stock height\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/bilstein-b4\"\u003eBilstein B4\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSport upgrade at stock height\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/bilstein-b6\"\u003eBilstein B6\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShortened damper for a lowered car\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eB8 — you're in the right place\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShortened damper + matched Bilstein springs as a kit\u003c\/td\u003e\n\u003ctd\u003e\u003ca href=\"\/collections\/bilstein-b12\"\u003eBilstein B12\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustable ride height\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/collections\/bilstein-b14\"\u003eBilstein B14\u003c\/a\u003e or B16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e\u003ca href=\"\/collections\/bilstein\"\u003eAll Bilstein\u003c\/a\u003e · \u003ca href=\"\/pages\/bilstein-ranges\"\u003eBilstein ranges explained\u003c\/a\u003e · \u003ca href=\"\/pages\/vehicles\"\u003eBrowse by vehicle\u003c\/a\u003e · \u003ca href=\"\/pages\/parts-a-z\"\u003ePart number index\u003c\/a\u003e\u003c\/p\u003e","products":[{"product_id":"bilstein-shock-absorber-22-003652","title":"Bilstein B8 Shock Absorbers 22-003652 – Mercedes-Benz 124, 190, E-Class","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 22-003652\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 6 Mercedes-Benz models including 190 (W201) and 124 Saloon (W124) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615711867204,"sku":"22-003652","price":217.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-003652_1.jpg?v=1776084512"},{"product_id":"bilstein-shock-absorber-24-013802","title":"Bilstein B8 Shock Absorbers 24-013802 – Honda Civic IV (EC, ED, EE, EF)","description":"\u003cp\u003eBilstein B8 Sprint Front Right shock absorber — Bilstein Shock Absorber 24-013802\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Honda Civic 4 (EC, ED, EE, EF), 09\/1987–10\/1993, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front right — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615749353796,"sku":"24-013802","price":130.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-013802.jpg?v=1776007466"},{"product_id":"bilstein-shock-absorber-24-013819","title":"Bilstein B8 Shock Absorbers 24-013819 – Honda Civic IV (EC, ED, EE, EF)","description":"\u003cp\u003eBilstein B8 Sprint Front Left shock absorber — Bilstein Shock Absorber 24-013819\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Honda Civic 4 (EC, ED, EE, EF), 09\/1987–10\/1993, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front left — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615749419332,"sku":"24-013819","price":131.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-013819.jpg?v=1776007466"},{"product_id":"bilstein-shock-absorber-24-014700","title":"Bilstein B8 Shock Absorbers 24-014700 – Mercedes-Benz 124, 190, E-Class","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-014700\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 5 Mercedes-Benz models including 190 (W201) and 124 Saloon (W124) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615750598980,"sku":"24-014700","price":165.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-014700.jpg?v=1776007466"},{"product_id":"bilstein-shock-absorber-24-015356","title":"Bilstein B8 Shock Absorbers 24-015356 – Mercedes-Benz S-Class (W126)","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 24-015356\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mercedes-Benz S Klasse (W126), 10\/1979–06\/1991, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615751713092,"sku":"24-015356","price":188.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-015356.jpg?v=1776007467"},{"product_id":"bilstein-shock-absorber-24-015370","title":"Bilstein B8 Shock Absorbers 24-015370 – Mercedes-Benz S-Class (W140, C140)","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 24-015370\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mercedes-Benz S Klasse (W140), 02\/1991–12\/1998, RWD and Mercedes-Benz S Klasse Coupe (C140), 07\/1992–12\/1999, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615751811396,"sku":"24-015370","price":197.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-015370.jpg?v=1776007466"},{"product_id":"bilstein-shock-absorber-24-015387","title":"Bilstein B8 Shock Absorbers 24-015387 – Mercedes-Benz S-Class (W140, C140)","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-015387\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mercedes-Benz S Klasse (W140), 02\/1991–12\/1998, RWD and Mercedes-Benz S Klasse Coupe (C140), 07\/1992–12\/1999, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615752008004,"sku":"24-015387","price":214.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-015387.jpg?v=1776007466"},{"product_id":"bilstein-shock-absorber-24-016056","title":"Bilstein B8 Shock Absorbers 24-016056 – Honda Civic, CRX, Integra","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-016056\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom Fork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 Honda models including Civic 5 (EG, EH) and Crx 3 (EH, EG) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom fork. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615752663364,"sku":"24-016056","price":169.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-016056.jpg?v=1776007466"},{"product_id":"bilstein-shock-absorber-24-020275","title":"Bilstein B8 Shock Absorbers 24-020275 – BMW 3 Series \/ Alpina B3 \/ BMW Z1","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-020275\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 5 models from Alpina and BMW, including BMW 3er Cabriolet (E30) and BMW 3 Series (E30) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615755940164,"sku":"24-020275","price":141.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-020275.jpg?v=1776007466"},{"product_id":"bilstein-shock-absorber-24-020756","title":"Bilstein B8 Shock Absorbers 24-020756 – Peugeot 106 \/ Citroën AX \/ Citroën Saxo","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-020756\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Citroën and Peugeot, including Citroën Ax (ZA) and Peugeot 106 I (1A, 1C) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615757906244,"sku":"24-020756","price":122.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-020756_1.jpg?v=1779441482"},{"product_id":"bilstein-shock-absorber-24-020817","title":"Bilstein B8 Shock Absorbers 24-020817 – Audi A4 \/ Audi A6 \/ VW Passat","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 24-020817\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom Fork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 6 models from Audi and VW, including Audi A4 B5 (8D2) and Audi A4 B5 Avant (8D5) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom fork. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615758496068,"sku":"24-020817","price":175.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-020817.jpg?v=1776007466"},{"product_id":"bilstein-shock-absorber-24-026246","title":"Bilstein B8 Shock Absorbers 24-026246 – Audi A3 \/ Audi TT \/ Seat Leon","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-026246\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Audi A3 (8L1), 09\/1996–09\/2006, FWD, Audi TT (8N3), 10\/1998–02\/2007, FWD and SEAT Leon 1 (1M1), 11\/1999–06\/2006, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615770423620,"sku":"24-026246","price":143.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-026246.jpg?v=1776007474"},{"product_id":"bilstein-shock-absorber-24-026987","title":"Bilstein B8 Shock Absorbers 24-026987 – BMW 3 Series \/ Alpina B3","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-026987\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 6 models from Alpina and BMW, including BMW 3 Series (E46) and BMW 3er Coupe (E46) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615772619076,"sku":"24-026987","price":131.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-026987_1.jpg?v=1776084220"},{"product_id":"bilstein-shock-absorber-24-027250","title":"Bilstein B8 Shock Absorbers 24-027250 – Alpina B8 \/ BMW 3 Series","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-027250\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E36), 09\/1990–11\/1998, RWD and Alpina B8 (E36), 01\/1995–03\/1998, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 33 52 2 227 488.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615775764804,"sku":"24-027250","price":148.74,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-027250.jpg?v=1776007474"},{"product_id":"bilstein-shock-absorber-24-027977","title":"Bilstein B8 Shock Absorbers 24-027977 – Alfa Romeo 156, 147, GT","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 24-027977\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 Alfa Romeo models including 156 (932) and 156 Sportwagon (932) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 46763385.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615776551236,"sku":"24-027977","price":172.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-027977_1.jpg?v=1779441488"},{"product_id":"bilstein-shock-absorber-24-062053","title":"Bilstein B8 Shock Absorbers 24-062053 – Mercedes-Benz E-Class (W210)","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-062053\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mercedes-Benz E Klasse (W210), 06\/1995–08\/2003 — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 210 320 09 31, A 210 320 09 31, A 210 326 23 00, 210 326 23 00.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615782220100,"sku":"24-062053","price":170.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-062053.jpg?v=1776007474"},{"product_id":"bilstein-shock-absorber-24-062145","title":"Bilstein B8 Shock Absorbers 24-062145 – Audi A4, 80","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-062145\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 5 Audi models including 80 B4 Avant (8C5) and 80 B4 Saloon (8C2) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615782482244,"sku":"24-062145","price":166.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-062145.jpg?v=1776007474"},{"product_id":"bilstein-shock-absorber-24-065108","title":"Bilstein B8 Shock Absorbers 24-065108 – Audi A6 (4B2, 4B4, 4B5, 4B6)","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 24-065108\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom Fork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Audi A6 C5 (4B2, 4B4), 01\/1997–12\/2005 and Audi A6 C5 Avant (4B5, 4B6), 11\/1997–01\/2006, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom fork. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615783235908,"sku":"24-065108","price":179.76,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-065108_1.jpg?v=1776084192"},{"product_id":"bilstein-shock-absorber-24-065115","title":"Bilstein B8 Shock Absorbers 24-065115 – VW Passat \/ Audi A6","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-065115\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Audi and VW, including Audi A6 C5 (4B2, 4B4) and VW Passat B5 Variant (3B5) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 4B3513031J, 4B3 513 031 J.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615783268676,"sku":"24-065115","price":175.72,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-065115.jpg?v=1776007474"},{"product_id":"bilstein-shock-absorber-24-065504","title":"Bilstein B8 Shock Absorbers 24-065504 – Mazda MX-5 II (NB)","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 24-065504\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda MX-5 II (NB), 01\/1998–10\/2005, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e N06734700, NE 45 34 700, D403152816, F503159560.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615783989572,"sku":"24-065504","price":200.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-065504.jpg?v=1776007475"},{"product_id":"bilstein-shock-absorber-24-065511","title":"Bilstein B8 Shock Absorbers 24-065511 – Mazda MX-5 II (NB)","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-065511\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda MX-5 II (NB), 01\/1998–10\/2005, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e NE45 28 700.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615784055108,"sku":"24-065511","price":178.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-065511.jpg?v=1776007474"},{"product_id":"bilstein-shock-absorber-24-067577","title":"Bilstein B8 Shock Absorbers 24-067577 – BMW 3 Series (E46)","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-067577\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 BMW models including 3 Series (E46) and 3er Touring (E46) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615785529668,"sku":"24-067577","price":152.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-067577_1.jpg?v=1779441493"},{"product_id":"bilstein-shock-absorber-24-067904","title":"Bilstein B8 Shock Absorbers 24-067904 – Škoda Fabia \/ Audi A1 and more","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-067904\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from Audi, SEAT, VW and Škoda, including Škoda Fabia 1 (6Y2) and Audi A2 (8Z0) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615785627972,"sku":"24-067904","price":120.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-067904_1.jpg?v=1779441493"},{"product_id":"bilstein-shock-absorber-24-069083","title":"Bilstein B8 Shock Absorbers 24-069083 – Mercedes-Benz CLS, E-Class","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-069083\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mercedes-Benz E Klasse (W211), 03\/2002–03\/2009, RWD and Mercedes-Benz CLS (C219), 10\/2004–12\/2012, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 211 326 02 00, A 211 326 02 00.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615787331908,"sku":"24-069083","price":171.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-069083.jpg?v=1776007475"},{"product_id":"bilstein-shock-absorber-24-102551","title":"Bilstein B8 Shock Absorbers 24-102551 – Saab 9-3 II (YS3F, E79, D79, D75)","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-102551\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Saab 9-3 II (YS3F, E79, D79, D75), 09\/2002–02\/2015, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615788773700,"sku":"24-102551","price":163.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-102551.jpg?v=1776007475"},{"product_id":"bilstein-shock-absorber-24-109666","title":"Bilstein B8 Shock Absorbers 24-109666 – BMW 5 Series (E60)","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-109666\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (E60), 12\/2001–03\/2010, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 33 52 7 905 315.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615792476484,"sku":"24-109666","price":225.33,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-109666.jpg?v=1776007475"},{"product_id":"bilstein-shock-absorber-24-119818","title":"Bilstein B8 Shock Absorbers 24-119818 – Audi A4 (8E2, 8H7, 8HE, 8EC)","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 24-119818\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom Fork\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 Audi models including A4 B6 (8E2) and A4 B6 Cabriolet (8H7) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 8E0 413 031 DA, 8E0413031DA.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom fork. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615794737476,"sku":"24-119818","price":175.28,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-119818.jpg?v=1776007475"},{"product_id":"bilstein-shock-absorber-24-119825","title":"Bilstein B8 Shock Absorbers 24-119825 – Audi A4 (8E2, 8H7, 8HE, 8EC)","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-119825\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 Audi models including A4 B6 (8E2) and A4 B6 Cabriolet (8H7) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615794770244,"sku":"24-119825","price":171.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-119825.jpg?v=1776007474"},{"product_id":"bilstein-shock-absorber-24-178006","title":"Bilstein B8 Shock Absorbers 24-178006 – VW Golf, Touran and more","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-178006\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 18 models from Audi, SEAT, VW and Škoda, including Audi A3 (8P1) and VW Golf 5 (1K1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615804010820,"sku":"24-178006","price":157.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-178006.jpg?v=1776007481"},{"product_id":"bilstein-shock-absorber-24-241328","title":"Bilstein B6 Shock Absorbers 24-241328 – Mercedes-Benz C-Class (W205, S205, C205, A205)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 4 Mercedes-Benz models — Bilstein Shock Absorber 24-241328.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 Mercedes-Benz models including C Klasse (W205) and C Klasse T Modell (S205) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615814005060,"sku":"24-241328","price":380.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-241328_1.jpg?v=1776083973"},{"product_id":"bilstein-shock-absorber-24-241335","title":"Bilstein B6 Shock Absorbers 24-241335 – Mercedes-Benz C-Class (W205, S205, C205, A205)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 4 Mercedes-Benz models — Bilstein Shock Absorber 24-241335.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 Mercedes-Benz models including C Klasse (W205) and C Klasse T Modell (S205) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615814037828,"sku":"24-241335","price":195.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-241335_1.jpg?v=1776083972"},{"product_id":"bilstein-shock-absorber-24-252058","title":"Bilstein B6 Shock Absorbers 24-252058 – Mercedes-Benz C-Class (W205, S205, A205)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Mercedes-Benz C Klasse, C Klasse T Modell and C Klasse Cabriolet — Bilstein Shock Absorber 24-252058.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mercedes-Benz C Klasse (W205), 07\/2013–02\/2023, AWD, Mercedes-Benz C Klasse T Modell (S205), 09\/2014–02\/2023, AWD and Mercedes-Benz C Klasse Cabriolet (A205), 06\/2016–04\/2023, AWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615818199364,"sku":"24-252058","price":354.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-252058_1.jpg?v=1776083953"},{"product_id":"bilstein-shock-absorber-24-252065","title":"Bilstein B6 Shock Absorbers 24-252065 – Mercedes-Benz C-Class (W205, S205, A205)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Mercedes-Benz C Klasse, C Klasse T Modell and C Klasse Cabriolet — Bilstein Shock Absorber 24-252065.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mercedes-Benz C Klasse (W205), 07\/2013–02\/2023, AWD, Mercedes-Benz C Klasse T Modell (S205), 09\/2014–02\/2023, AWD and Mercedes-Benz C Klasse Cabriolet (A205), 06\/2016–04\/2023, AWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615818297668,"sku":"24-252065","price":354.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-252065_1.jpg?v=1776083952"},{"product_id":"bilstein-shock-absorber-34-003343","title":"Bilstein B8 Shock Absorbers 34-003343 – BMW 3 Series (E30)","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 34-003343\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3er Cabriolet (E30), 09\/1982–11\/1993, RWD, BMW 3 Series (E30), 09\/1982–03\/1992, RWD and BMW 3er Touring (E30), 07\/1987–10\/1994, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 31 32 1 130 066 2, 1 130 066, 31 32 1 130 066.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615833731396,"sku":"34-003343","price":203.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/34-003343.jpg?v=1776007485"},{"product_id":"bilstein-shock-absorber-34-003350","title":"Bilstein B8 Shock Absorbers 34-003350 – BMW 3 Series \/ Alpina B3","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 34-003350\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Alpina and BMW, including BMW 3er Cabriolet (E30) and BMW 3 Series (E30) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615833764164,"sku":"34-003350","price":194.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/34-003350.jpg?v=1776007487"},{"product_id":"bilstein-shock-absorber-34-030196","title":"Bilstein B8 Shock Absorbers 34-030196 – BMW 5 Series (E34)","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 34-030196\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (E34), 02\/1987–12\/1995, RWD and BMW 5er Touring (E34), 07\/1991–07\/1996, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615834353988,"sku":"34-030196","price":212.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/34-030196.jpg?v=1776007487"},{"product_id":"bilstein-shock-absorber-34-181577","title":"Bilstein B8 Shock Absorbers 34-181577 – Opel Astra F (T92)","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 34-181577\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Opel Astra F (T92), 09\/1991–10\/2000, FWD, Opel Astra F Caravan (T92), 09\/1991–01\/2001, FWD and Opel Astra F Classic Caravan (T92), 01\/1998–01\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615836418372,"sku":"34-181577","price":137.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/34-181577_1.jpg?v=1779441541"},{"product_id":"bilstein-shock-absorber-35-003663","title":"Bilstein B8 Shock Absorbers 35-003663 – VW Golf, Jetta","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 4 VW models — Bilstein Shock Absorber 35-003663.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 VW models including Golf 2 (19E, 1G1) and Golf 2 Van (19E, 1G1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615836713284,"sku":"35-003663","price":251.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-003663_1_1.jpg?v=1776083794"},{"product_id":"bilstein-shock-absorber-35-040415","title":"Bilstein B8 Shock Absorbers 35-040415 – Ford Sierra (GBC, GBG, GB4, BNG)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Sierra 1 Hatchback, Sierra 2 and Sierra 2 Estate — Bilstein Shock Absorber 35-040415.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Sierra 1 Hatchback (GBC), 08\/1982–02\/1987, RWD, Ford Sierra 2 (GBG, GB4), 01\/1987–02\/1993, RWD and Ford Sierra 2 Estate (BNG), 01\/1987–02\/1993, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615836942660,"sku":"35-040415","price":381.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-040415_1.jpg?v=1776083791"},{"product_id":"bilstein-shock-absorber-35-040477","title":"Bilstein B8 Shock Absorbers 35-040477 – Renault Clio I (B\/C57, 5\/357)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Renault Clio 1 (B-C57, 5-357) — Bilstein Shock Absorber 35-040477.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Renault Clio 1 (B-C57, 5-357), 05\/1990–08\/1999, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615836975428,"sku":"35-040477","price":242.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-040477_1.jpg?v=1779441544"},{"product_id":"bilstein-shock-absorber-35-043928","title":"Bilstein B8 Shock Absorbers 35-043928 – VW Golf \/ Seat Cordoba and more","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 35-043928\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 9 models from SEAT and VW, including VW Corrado (53I) and VW Golf 3 (1H1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 6KL 413 031.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615837335876,"sku":"35-043928","price":234.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-043928.jpg?v=1776007487"},{"product_id":"bilstein-shock-absorber-35-043966","title":"Bilstein B8 Shock Absorbers 35-043966 – VW Golf \/ Seat Cordoba and more","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 7 models from SEAT and VW — Bilstein Shock Absorber 35-043966.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from SEAT and VW, including VW Corrado (53I) and VW Golf 3 (1H1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615837401412,"sku":"35-043966","price":251.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-043966_1.jpg?v=1776083789"},{"product_id":"bilstein-shock-absorber-35-044024","title":"Bilstein B8 Shock Absorbers 35-044024 – Alpina B3 \/ Alpina B8 \/ BMW 3 Series","description":"\u003cp\u003eBilstein B8 Sprint Front Left shock absorber — Bilstein Shock Absorber 35-044024\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E36), 09\/1990–11\/1998, RWD, Alpina B3 (E36), 04\/1993–05\/1999, RWD and Alpina B8 (E36), 01\/1995–03\/1998, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 31 31 2 227 485, 1 095 059, 31 31 1 091 703, 31 31 1 094 189, 31 31 6 753 261.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front left — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615837466948,"sku":"35-044024","price":215.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-044024.jpg?v=1776007487"},{"product_id":"bilstein-shock-absorber-35-044031","title":"Bilstein B8 Shock Absorbers 35-044031 – Alpina B3 \/ Alpina B8 \/ BMW 3 Series","description":"\u003cp\u003eBilstein B8 Sprint Front Right shock absorber — Bilstein Shock Absorber 35-044031\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E36), 09\/1990–11\/1998, RWD, Alpina B3 (E36), 04\/1993–05\/1999, RWD and Alpina B8 (E36), 01\/1995–03\/1998, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 31 31 2 227 486, 1 091 704, 31 31 1 091 704, 31 31 1 094 190, 31 31 6 753 262.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front right — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615837499716,"sku":"35-044031","price":215.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-044031.jpg?v=1776007488"},{"product_id":"bilstein-shock-absorber-35-044048","title":"Bilstein B8 Shock Absorbers 35-044048 – BMW 3 Series (E36)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the BMW 3 Series (E36) — Bilstein Shock Absorber 35-044048.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E36), 09\/1990–11\/1998, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615837532484,"sku":"35-044048","price":275.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-044048_1.jpg?v=1776083787"},{"product_id":"bilstein-shock-absorber-35-044055","title":"Bilstein B8 Shock Absorbers 35-044055 – BMW 3 Series (E36)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the BMW 3 Series (E36) — Bilstein Shock Absorber 35-044055.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E36), 09\/1990–11\/1998, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615837565252,"sku":"35-044055","price":275.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-044055_1.jpg?v=1779441545"},{"product_id":"bilstein-shock-absorber-35-046387","title":"Bilstein B8 Shock Absorbers 35-046387 – Škoda Octavia \/ Audi A3 and more","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 35-046387\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 13 models from Audi, SEAT, VW and Škoda, including Audi A3 (8L1) and Škoda Octavia 1 (1U2) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 8N0413031K, 8N0 413 031 K.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615837696324,"sku":"35-046387","price":229.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-046387.jpg?v=1776007487"},{"product_id":"bilstein-shock-absorber-35-051176","title":"Bilstein B8 Shock Absorbers 35-051176 – Renault Clio II (BB, CB)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Renault Clio 2 (BB, CB) — Bilstein Shock Absorber 35-051176.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Renault Clio 2 (BB, CB), 03\/1998–12\/2016, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615838843204,"sku":"35-051176","price":214.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-051176_1.jpg?v=1779441545"},{"product_id":"bilstein-shock-absorber-35-051428","title":"Bilstein B8 Shock Absorbers 35-051428 – Ford Focus I (DAW, DBW, DNW)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Focus 1 and Focus 1 Van Estate — Bilstein Shock Absorber 35-051428.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 (DAW, DBW), 09\/1998–11\/2009, FWD and Ford Focus 1 Van Estate (DNW), 08\/1998–03\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615838974276,"sku":"35-051428","price":276.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-051428_1.jpg?v=1776083784"},{"product_id":"bilstein-shock-absorber-35-051503","title":"Bilstein B8 Shock Absorbers 35-051503 – Jaguar X-Type I (X400)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Jaguar X-Type 1 (X400) — Bilstein Shock Absorber 35-051503.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Jaguar X-Type 1 (X400), 03\/2001–11\/2009, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615839105348,"sku":"35-051503","price":272.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-051503_1.jpg?v=1779441546"}],"url":"https:\/\/suspengo.com\/collections\/bilstein-b8.oembed?page=2","provider":"Suspengo","version":"1.0","type":"link"}