{"title":"BMW Shock Absorbers \u0026 Suspension","description":"\u003cp\u003eSuspension for BMW, covering 134 chassis generations from the E21 through the current G20 and G21. \u003ca href=\"\/collections\/suspension-bmw\/series-b4\"\u003eBilstein B4\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-bmw\/series-b6\"\u003eB6\u003c\/a\u003e cover standard ride height, \u003ca href=\"\/collections\/suspension-bmw\/series-b12\"\u003eB12\u003c\/a\u003e kits and \u003ca href=\"\/collections\/suspension-bmw\/series-s-tech\"\u003eTein S.Tech\u003c\/a\u003e springs lower the car, and \u003ca href=\"\/collections\/suspension-bmw\/series-b14\"\u003eB14\u003c\/a\u003e, \u003ca href=\"\/collections\/suspension-bmw\/series-b16\"\u003eB16\u003c\/a\u003e and Tein coilovers set it directly. Every part is matched to a chassis code and build-month range.\u003c\/p\u003e\n\u003ch2\u003eWhich models this covers\u003c\/h2\u003e\n\u003cp\u003eThe catalogue runs across the 1, 3 and 5 Series and their estate, coupé and cabriolet bodies, in both rear-wheel drive and xDrive. Deeper pages exist for the \u003ca href=\"\/collections\/suspension-bmw-3-series\"\u003e3 Series\u003c\/a\u003e, \u003ca href=\"\/collections\/suspension-bmw-5-series\"\u003e5 Series\u003c\/a\u003e, \u003ca href=\"\/collections\/suspension-bmw-1-series\"\u003e1 Series\u003c\/a\u003e and the \u003ca href=\"\/collections\/suspension-bmw-3-series-e90\"\u003e3 Series E90\u003c\/a\u003e generation specifically. Because parts are chassis-matched, an E46 and an E90 never share a listing by accident.\u003c\/p\u003e\n\u003ch2\u003eChoosing between the ranges\u003c\/h2\u003e\n\u003cp\u003eBMW is the one make where \u003ca href=\"\/collections\/suspension-bmw\/series-b6\"\u003eBilstein B6\u003c\/a\u003e nearly matches \u003ca href=\"\/collections\/suspension-bmw\/series-b4\"\u003eBilstein B4\u003c\/a\u003e in depth, which reflects how these cars are bought. B4 is the OE-comparable replacement that restores the factory ride; B6 is firmer at the same height, with tighter body control for harder driving. \u003ca href=\"\/collections\/suspension-bmw\/series-endurapro\"\u003eTein EnduraPro\u003c\/a\u003e covers the same ground as B6, and \u003ca href=\"\/collections\/suspension-bmw\/series-endurapro-plus\"\u003eEnduraPro Plus\u003c\/a\u003e adds 16 damping levels you can set after fitting. \u003ca href=\"\/collections\/suspension-bmw\/series-b8\"\u003eBilstein B8\u003c\/a\u003e is shortened and suits only cars already lowered by about 30–40 mm. For lowering a standard car, \u003ca href=\"\/collections\/suspension-bmw\/series-b12\"\u003eBilstein B12\u003c\/a\u003e is a matched damper-and-spring kit and \u003ca href=\"\/collections\/suspension-bmw\/series-s-tech\"\u003eTein S.Tech\u003c\/a\u003e springs work with the original dampers. \u003ca href=\"\/collections\/suspension-bmw\/series-b14\"\u003eB14\u003c\/a\u003e, \u003ca href=\"\/collections\/suspension-bmw\/series-b16\"\u003eB16\u003c\/a\u003e, \u003ca href=\"\/collections\/suspension-bmw\/series-street-advance\"\u003eStreet Advance Z\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-bmw\/series-flex-z\"\u003eFlex Z\u003c\/a\u003e cover adjustable ride height.\u003c\/p\u003e\n\u003ch2\u003eWhat to check before ordering\u003c\/h2\u003e\n\u003cp\u003eFront and rear are separate listings; fit in axle pairs, renew strut bearings and protection kits at the same time, and align afterwards. The BMW caveat is optional suspension: M Sport cars use their own part numbers, xDrive cars take different front struts from rear-wheel-drive cars of the same generation, and Touring models with self-levelling rear suspension differ again.\u003c\/p\u003e\n\u003ch2\u003eCommon questions for this make\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill parts carry between generations?\u003c\/strong\u003e No. E36, E46, E90, F30 and G20 all use different struts — select by chassis code.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB4 or B6?\u003c\/strong\u003e B4 returns the car to standard. B6 is the firmer choice if the standard setup has always felt soft.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes M Sport suspension change the part?\u003c\/strong\u003e Yes, on most models. Check the build rather than the model name.\u003c\/p\u003e","products":[{"product_id":"tein-street-advance-z-damper-kit-f18-gsga2-91ss2","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSGA2-91SS2 – BMW 5 Series (F10)","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 2011 Bmw 5Er, 2010 Bmw 5Series — Tein Street Advance Z Damper Kit, F18 - GSGA2-91SS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (F10), 01\/2009–2016, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404184269124,"sku":"GSGA2-91SS2","price":802.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSGA2-91SS2.jpg?v=1776621855"},{"product_id":"tein-street-advance-z-damper-kit-f30-gsga8-91as3","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSGA8-91AS3 – BMW 3 Series, 1 Series","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 2011 Bmw 1Er, 2012 Bmw 3Series Sedan — Tein Street Advance Z Damper Kit, F30 - GSGA8-91AS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 1er (F21), 2011–2019, RWD, BMW 3 Series (F30, F80), 11\/2011–10\/2018, RWD and BMW 3 Series Sedan (F30), 02\/2012–02\/2019, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eCamber-adjustable insert-type strut with off-center sleeve. Not tested on vehicle with electronically controlled suspension.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404184367428,"sku":"GSGA8-91AS3","price":920.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSGA8-91AS3.jpg?v=1776621855"},{"product_id":"tein-street-advance-z-damper-kit-g38-gsgg6-91ss2","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSGG6-91SS2 – BMW 5 Series (G30, F90, G38)","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 2017 Bmw 5Series — Tein Street Advance Z Damper Kit, G38 - GSGG6-91SS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (G30, F90), from 09\/2016, RWD and BMW 5 Series (G38), 2017–2023, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404184826180,"sku":"GSGG6-91SS2","price":861.22,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSGG6-91SS2.jpg?v=1776621849"},{"product_id":"tein-street-advance-z-damper-kit-g20-gsgh8-91as3","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSGH8-91AS3 – BMW 3 Series (G20, G80, G28)","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 2019 Bmw 3Series, 2019 Bmw 3Series Sedan — Tein Street Advance Z Damper Kit, G20 - GSGH8-91AS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (G20, G80, G28), 11\/2018–12\/2025, RWD and BMW 3 Series Sedan (G20), from 2019, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eCamber-adjustable insert-type strut with off-center sleeve.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404184924484,"sku":"GSGH8-91AS3","price":920.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSGH8-91AS3.jpg?v=1776621849"},{"product_id":"tein-street-advance-z-damper-kit-m3-e46-gsg68-91as2","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSG68-91AS2 – BMW 3 Series (E46)","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 2000 Bmw 3Er Cabriolet — Tein Street Advance Z Damper Kit, M3(E46) - GSG68-91AS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3er Cabriolet (E46), 2000–01\/2007, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404185153860,"sku":"GSG68-91AS2","price":861.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSG68-91AS2.jpg?v=1776621845"},{"product_id":"tein-street-advance-z-damper-kit-e90-e91-e92-gsj14-91as2","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSJ14-91AS2 – BMW 3 Series, 1 Series","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 2004–2005 Bmw 1Er, 2005–2006 Bmw 3Er, 2006–2008 Bmw 3Er Coupe and 1 additional applications — Tein Street Advance Z Damper Kit, E90\/E91\/E92 - GSJ14-91AS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 BMW models including 1er (E87) and 3er Touring (E91) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eData applies to sport suspension model. Use of oe-equivalent size wheel is recommended, as there may not be enough clearance around the front shock absorber.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404187775300,"sku":"GSJ14-91AS2","price":861.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSJ14-91AS2.jpg?v=1776621829"},{"product_id":"tein-street-advance-z-damper-kit-e46-gsv10-91as2","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSV10-91AS2 – BMW 3 Series (E46)","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 1998–2001 Bmw 3Er — Tein Street Advance Z Damper Kit, E46 - GSV10-91AS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 BMW models including 3 Series (E46) and 3er Touring (E46) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404198752580,"sku":"GSV10-91AS2","price":1073.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSV10-91AS2.jpg?v=1776621761"},{"product_id":"tein-s-tech-spring-set-f18-skga2-s3b00","title":"Tein S.Tech Lowering Springs SKGA2-S3B00 – BMW 5 Series (F10)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2011 Bmw 5Er, 2010 Bmw 5Series — Tein S.Tech Spring Set, F18 - SKGA2-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (F10), 01\/2009–2016, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404202914116,"sku":"SKGA2-S3B00","price":188.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/tein-coil-spring-set_040.png?v=1786997385"},{"product_id":"tein-s-tech-spring-set-f30-skga8-s3b00","title":"Tein S.Tech Lowering Springs SKGA8-S3B00 – BMW 3 Series, 4 Series","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2011–2015 Bmw 3Series, 2014–2017 Bmw 4Er Gran Coupe, 2013–2017 Bmw 4Series Coupe — Tein S.Tech Spring Set, F30 - SKGA8-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series, 3 Series Sedan and 4 Series Gran Coupe — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404202946884,"sku":"SKGA8-S3B00","price":180.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/tein-coil-spring-set_041.png?v=1786997388"},{"product_id":"tein-s-tech-spring-set-g38-skgg6-s3b00","title":"Tein S.Tech Lowering Springs SKGG6-S3B00 – BMW 5 Series (G30, F90, G38)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2017 Bmw 5Series — Tein S.Tech Spring Set, G38 - SKGG6-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (G30, F90), from 09\/2016, RWD and BMW 5 Series (G38), 2017–2023, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404203667780,"sku":"SKGG6-S3B00","price":173.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/tein-coil-spring-set_050.png?v=1786997428"},{"product_id":"tein-s-tech-spring-set-g20-skgh8-s3b00","title":"Tein S.Tech Lowering Springs SKGH8-S3B00 – BMW 3 Series (G20, G80, G28)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2019 Bmw 3Series — Tein S.Tech Spring Set, G20 - SKGH8-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (G20, G80, G28), 11\/2018–12\/2025, RWD and BMW 3 Series Sedan (G20), from 2019, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFt: cut bump rubber at 40mm from the bottom and use the upper portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404203897156,"sku":"SKGH8-S3B00","price":188.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/tein-coil-spring-set_052.png?v=1786997435"},{"product_id":"tein-s-tech-spring-set-f80-skgl0-s3b00","title":"Tein S.Tech Lowering Springs SKGL0-S3B00 – BMW M3 (F80)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2015 Bmw M3 — Tein S.Tech Spring Set, F80 - SKGL0-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW M3 (F80), 2015–2020, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFt: cut bump rubber at 23mm from the bottom and use the upper portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404204093764,"sku":"SKGL0-S3B00","price":165.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/tein-coil-spring-set_054.png?v=1786997457"},{"product_id":"tein-s-tech-spring-set-e46-m3-skg68-c3b00","title":"Tein S.Tech Lowering Springs SKG68-C3B00 – BMW 3 Series (E46)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2001 Bmw 3Er, 2000 Bmw 3Er Cabriolet — Tein S.Tech Spring Set, E46(M3) - SKG68-C3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E46), 12\/1997–2005, RWD and BMW 3er Cabriolet (E46), 2000–01\/2007, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e2Dr\/6cyl\/ incl. Convertible. Ft: cut bump rubber at 10mm from the bottom and use the upper portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404205142340,"sku":"SKG68-C3B00","price":180.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_4172a932-6864-49a1-8820-fdcdaad0f048.png?v=1786978232"},{"product_id":"tein-s-tech-spring-set-e46-m3-skg68-s3b00","title":"Tein S.Tech Lowering Springs SKG68-S3B00 – BMW 3 Series (E46)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2001 Bmw 3Er, 2000 Bmw 3Er Cabriolet — Tein S.Tech Spring Set, E46(M3) - SKG68-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E46), 12\/1997–2005, RWD and BMW 3er Cabriolet (E46), 2000–01\/2007, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e2Dr\/6cyl\/ incl. Convertible. Ft: cut bump rubber at 10mm from the bottom and use the upper portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404205175108,"sku":"SKG68-S3B00","price":173.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_da92c898-db42-40fd-b2f0-4e6b7a32510d.png?v=1786978232"},{"product_id":"tein-s-tech-spring-set-e46-skg72-c3b00","title":"Tein S.Tech Lowering Springs SKG72-C3B00 – BMW 3 Series (E46)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2000 Bmw 3Er — Tein S.Tech Spring Set, E46 - SKG72-C3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 BMW models including 3 Series (E46) and 3er Touring (E46) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e2Dr\/6cyl\/ exc m3, wagon. Ft: cut bump rubber at 20mm from the bottom and use the upper portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404205470020,"sku":"SKG72-C3B00","price":165.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_fe61f81e-06c7-4727-9566-0fc264163729.png?v=1786978232"},{"product_id":"tein-s-tech-spring-set-e46-skg72-s3b00","title":"Tein S.Tech Lowering Springs SKG72-S3B00 – BMW 3 Series (E46)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2000 Bmw 3Er, 2000 Bmw 3Er Coupe — Tein S.Tech Spring Set, E46 - SKG72-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 BMW models including 3 Series (E46) and 3er Touring (E46) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e2Dr\/6cyl\/ exc m3, wagon. Ft: cut bump rubber at 20mm from the bottom and use the upper portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404205535556,"sku":"SKG72-S3B00","price":165.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_f5d9814f-b92f-4e65-a91b-cbde24948fd5.png?v=1786978232"},{"product_id":"tein-s-tech-spring-set-e36-m3-skg76-c3b00","title":"Tein S.Tech Lowering Springs SKG76-C3B00 – BMW 3 Series (E36)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 1994 Bmw 3Er — Tein S.Tech Spring Set, E36(M3) - SKG76-C3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E36), 09\/1990–11\/1998, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e2Dr, 4dr\/6cyl\/ incl. Convertible. Ft: cut bump rubber at 10mm from the top and use the lower portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404206027076,"sku":"SKG76-C3B00","price":165.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_969eb90a-afa4-40fd-8a6f-6045aaa720b2.png?v=1786978232"},{"product_id":"tein-s-tech-spring-set-e36-m3-skg76-s3b00","title":"Tein S.Tech Lowering Springs SKG76-S3B00 – BMW 3 Series (E36)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 1994 Bmw 3Er, 1994 Bmw 3Er Cabriolet — Tein S.Tech Spring Set, E36(M3) - SKG76-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E36), 09\/1990–11\/1998, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e2Dr, 4dr\/6cyl\/ incl. Convertible. Ft: cut bump rubber at 10mm from the top and use the lower portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404206092612,"sku":"SKG76-S3B00","price":165.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_0c03a5ba-d033-4f3b-afed-497014ea9ba0.png?v=1786978232"},{"product_id":"tein-s-tech-spring-set-e36-skg88-c3b00","title":"Tein S.Tech Lowering Springs SKG88-C3B00 – BMW 3 Series (E36)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 1991 Bmw 3Er — Tein S.Tech Spring Set, E36 - SKG88-C3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E36), 09\/1990–11\/1998, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e2Dr, 4dr\/6cyl\/ exc. Convertible. Ft: cut bump rubber at 10mm from the top and use the lower portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404206518596,"sku":"SKG88-C3B00","price":173.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_869baa29-fe75-4bc1-86e4-6df1d69ebd76.png?v=1786978232"},{"product_id":"tein-s-tech-spring-set-e36-skg88-s3b00","title":"Tein S.Tech Lowering Springs SKG88-S3B00 – BMW 3 Series (E36)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 1991 Bmw 3Er — Tein S.Tech Spring Set, E36 - SKG88-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E36), 09\/1990–11\/1998, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e2Dr, 4dr\/6cyl\/ exc. Convertible. Ft: cut bump rubber at 10mm from the top and use the lower portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404206584132,"sku":"SKG88-S3B00","price":173.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_7d9477b0-86f5-4808-b6c4-062e063fd381.png?v=1786978232"},{"product_id":"tein-s-tech-spring-set-e90-skj14-s3b00","title":"Tein S.Tech Lowering Springs SKJ14-S3B00 – BMW 3 Series (E90, E92)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2006–2007 Bmw 3Er, 2006–2007 Bmw 3Er Coupe — Tein S.Tech Spring Set, E90 - SKJ14-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E90), 02\/2004–12\/2013, RWD and BMW 3er Coupe (E92), 01\/2005–12\/2013, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFt: cut bump rubber at 20mm from the bottom and use the upper portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404207403332,"sku":"SKJ14-S3B00","price":157.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_bccd774b-5e58-41a8-92a6-42561f991ed0.png?v=1786978233"},{"product_id":"tein-endurapro-kit-x3-x4-f25-f26-vsaal-a1ds2","title":"Tein Endurapro Shock Absorbers VSAAL-A1DS2 – BMW X3 (F25)","description":"\u003cp\u003eTein EnduraPro OE Replacement Damper Kit for 2011–2015 Bmw X3, 2014–2015 Bmw X4 — Tein Endurapro Kit, X3\/X4(F25\/F26) - VSAAL-A1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro is Tein's OE-replacement damper with slightly firmer valving than the factory part. Ride height and spring rates stay standard; what changes is body control — less float over undulations and a more settled feel at motorway speed. Damping is fixed, so there is nothing to set up after fitting. The choice when the original dampers are worn and you want a little more than stock.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW X3 (F25), 09\/2010–2017 — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e6Cyl. Not tested on sport suspension model.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404221559108,"sku":"VSAAL-A1DS2","price":519.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSAAL-A1DS2_4ff52719-082b-4258-b6a5-8750ac059323.jpg?v=1776416997"},{"product_id":"tein-endurapro-plus-kit-x3-x4-f25-f26-vsaal-b1ds2","title":"Tein Endurapro Plus Shock Absorbers VSAAL-B1DS2 – BMW X3 (F25)","description":"\u003cp\u003eTein EnduraPro Plus Performance Upgrade Damper Kit for 2011–2015 Bmw X3, 2014–2015 Bmw X4 — Tein Endurapro Plus Kit, X3\/X4(F25\/F26) - VSAAL-B1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro Plus is the adjustable version of Tein's OE-replacement damper. It keeps standard ride height and springs, but adds a 16-step damping adjuster so ride firmness can be tuned after the car is on the road — softer for poor surfaces, firmer for a loaded car or a quick drive. Useful when you want the option without lowering the car.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW X3 (F25), 09\/2010–2017 — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro Plus kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e6Cyl. Not tested on sport suspension model.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404221919556,"sku":"VSAAL-B1DS2","price":585.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSAAL-B1DS2.jpg?v=1776416994"},{"product_id":"tein-endurapro-plus-kit-x1-f48-vsaax-b1ds3","title":"Tein Endurapro Plus Shock Absorbers VSAAX-B1DS3 – BMW 2series Active (F45)","description":"\u003cp\u003eTein EnduraPro Plus Performance Upgrade Damper Kit for 2013–2014 Bmw 2Er Active Tourer, 2014–2015 Bmw 2Er Gran Tourer, 2014–2018 Bmw 2Series Active Tourer and 2 additional applications — Tein Endurapro Plus Kit, X1(F48) - VSAAX-B1DS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro Plus is the adjustable version of Tein's OE-replacement damper. It keeps standard ride height and springs, but adds a 16-step damping adjuster so ride firmness can be tuned after the car is on the road — softer for poor surfaces, firmer for a loaded car or a quick drive. Useful when you want the option without lowering the car.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 2 Series Active Tourer (F45), 11\/2013–10\/2021, AWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro Plus kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eNot tested on sport suspension model. Rr: includes bump rubber, dust boot \u0026amp; upper mount.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404222607684,"sku":"VSAAX-B1DS3","price":556.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSAAX-B1DS3.jpg?v=1776416994"},{"product_id":"tein-flex-z-damper-kit-bmw-f18-c-vsga2-c1sa3","title":"Tein Flex Z Shock Absorbers (Damper Kit) VSGA2-C1SA3 – BMW 5 Series (F10)","description":"\u003cp\u003eTein Flex-Z Height-Adjustable Coilover Kit for 2011 Bmw 5Er, 2010 Bmw 5Series — Tein Flex Z Damper Kit, Bmw F18 -C - VSGA2-C1SA3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eFlex Z is Tein's full street coilover: ride height and damping are both adjustable, with 16 damping steps and a wide height range. Height is set on the threaded body independently of spring preload, which is what keeps the ride usable at low settings. Developed for road use, with enough adjustment to change the car's character rather than just its stance.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (F10), 01\/2009–2016, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Flex Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404242727236,"sku":"VSGA2-C1SA3","price":1368.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSGA2-C1SA3.jpg?v=1776621734"},{"product_id":"tein-flex-z-damper-kit-bmw-f30-f36-c-vsga8-c1aa3","title":"Tein Flex Z Shock Absorbers (Damper Kit) VSGA8-C1AA3 – BMW 3 Series, 4 Series","description":"\u003cp\u003eTein Flex-Z Height-Adjustable Coilover Kit for 2012–2015 Bmw 3Series Sedan, 2014 Bmw 4Series Gran Coupe — Tein Flex Z Damper Kit, Bmw F30\/F36 -C - VSGA8-C1AA3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eFlex Z is Tein's full street coilover: ride height and damping are both adjustable, with 16 damping steps and a wide height range. Height is set on the threaded body independently of spring preload, which is what keeps the ride usable at low settings. Developed for road use, with enough adjustment to change the car's character rather than just its stance.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (F30, F80), 11\/2011–10\/2018, RWD, BMW 3 Series Sedan (F30), 02\/2012–02\/2019, RWD and BMW 4 Series Gran Coupe (F36), 06\/2014–06\/2021, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Flex Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eData applies to sport suspension model.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404242923844,"sku":"VSGA8-C1AA3","price":1344.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_c293844a-c3aa-4b35-b2b8-a4a536819656.png?v=1781341103"},{"product_id":"tein-flex-z-damper-kit-bmw-g38-c-vsgg6-c1sa3","title":"Tein Flex Z Shock Absorbers (Damper Kit) VSGG6-C1SA3 – BMW 5 Series (G38)","description":"\u003cp\u003eTein Flex-Z Height-Adjustable Coilover Kit for 2017 Bmw 5Series — Tein Flex Z Damper Kit, Bmw G38 -C - VSGG6-C1SA3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eFlex Z is Tein's full street coilover: ride height and damping are both adjustable, with 16 damping steps and a wide height range. Height is set on the threaded body independently of spring preload, which is what keeps the ride usable at low settings. Developed for road use, with enough adjustment to change the car's character rather than just its stance.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (G38), 2017–2023, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Flex Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404246987076,"sku":"VSGG6-C1SA3","price":1156.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSGG6-C1SA3.jpg?v=1776621728"},{"product_id":"tein-endurapro-plus-kit-bmw-g20-vsgh8-b1ds3","title":"Tein Endurapro Plus Shock Absorbers VSGH8-B1DS3 – BMW 3 Series, 4 Series","description":"\u003cp\u003eTein EnduraPro Plus Performance Upgrade Damper Kit for 2019 Bmw 3Er Touring Van, 2019 Bmw 3Series, 2019 Bmw 3Series Sedan and 3 additional applications — Tein Endurapro Plus Kit, Bmw G20 - VSGH8-B1DS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro Plus is the adjustable version of Tein's OE-replacement damper. It keeps standard ride height and springs, but adds a 16-step damping adjuster so ride firmness can be tuned after the car is on the road — softer for poor surfaces, firmer for a loaded car or a quick drive. Useful when you want the option without lowering the car.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 5 BMW models including 3 Series (G20, G80, G28) and 3er Touring Van (G21) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro Plus kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eNot tested on m sport model. Not tested on vehicle with electronically controlled suspension. Rr: includes bump rubber, dust boot \u0026amp; upper mount.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404248789316,"sku":"VSGH8-B1DS3","price":698.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSGH8-B1DS3.jpg?v=1776416968"},{"product_id":"tein-flex-z-damper-kit-bmw-g20-c-vsgh8-c1aa3","title":"Tein Flex Z Shock Absorbers (Damper Kit) VSGH8-C1AA3 – BMW 3 Series, 4 Series","description":"\u003cp\u003eTein Flex-Z Height-Adjustable Coilover Kit for 2019 Bmw 3Series, 2019 Bmw 3Series Sedan — Tein Flex Z Damper Kit, Bmw G20 -C - VSGH8-C1AA3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eFlex Z is Tein's full street coilover: ride height and damping are both adjustable, with 16 damping steps and a wide height range. Height is set on the threaded body independently of spring preload, which is what keeps the ride usable at low settings. Developed for road use, with enough adjustment to change the car's character rather than just its stance.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 5 BMW models including 3 Series (G20, G80, G28) and 3er Touring Van (G21) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Flex Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFt: service hole cover needs to be cut or removed.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404249182532,"sku":"VSGH8-C1AA3","price":1344.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSGH8-C1AA3.jpg?v=1776621728"},{"product_id":"tein-endurapro-kit-x5-e70-vsgm4-a1ds2","title":"Tein Endurapro Shock Absorbers VSGM4-A1DS2 – BMW X5 (E70)","description":"\u003cp\u003eTein EnduraPro OE Replacement Damper Kit for 2007–2011 Bmw X5, 2008–2010 Bmw X6 — Tein Endurapro Kit, X5(E70) - VSGM4-A1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro is Tein's OE-replacement damper with slightly firmer valving than the factory part. Ride height and spring rates stay standard; what changes is body control — less float over undulations and a more settled feel at motorway speed. Damping is fixed, so there is nothing to set up after fitting. The choice when the original dampers are worn and you want a little more than stock.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW X5 (E70), 2007–2013, AWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eNot compatible with air suspension model. Not tested on vehicle with electronically controlled suspension.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404251771204,"sku":"VSGM4-A1DS2","price":509.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSGM4-A1DS2.jpg?v=1776416960"},{"product_id":"tein-endurapro-plus-kit-x5-e53-vsgq2-b1ds2","title":"Tein Endurapro Plus Shock Absorbers VSGQ2-B1DS2 – BMW X5 (E53)","description":"\u003cp\u003eTein EnduraPro Plus Performance Upgrade Damper Kit for 2000–2003 Bmw X5 — Tein Endurapro Plus Kit, X5(E53) - VSGQ2-B1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro Plus is the adjustable version of Tein's OE-replacement damper. It keeps standard ride height and springs, but adds a 16-step damping adjuster so ride firmness can be tuned after the car is on the road — softer for poor surfaces, firmer for a loaded car or a quick drive. Useful when you want the option without lowering the car.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW X5 (E53), 2001–2006, AWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro Plus kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eNot compatible with air suspension model.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404254327108,"sku":"VSGQ2-B1DS2","price":613.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSGQ2-B1DS2.jpg?v=1776416955"},{"product_id":"tein-endurapro-kit-bmw-e90-e91-e92-e87-vsj14-a1ds2","title":"Tein Endurapro Shock Absorbers VSJ14-A1DS2 – BMW 3 Series, 1 Series","description":"\u003cp\u003eTein EnduraPro OE Replacement Damper Kit for 2004 Bmw 1Er, 2008 Bmw 1Er Cabriolet, 2008 Bmw 1Er Coupe and 3 additional applications — Tein Endurapro Kit, Bmw E90\/E91\/E92\/E87 - VSJ14-A1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro is Tein's OE-replacement damper with slightly firmer valving than the factory part. Ride height and spring rates stay standard; what changes is body control — less float over undulations and a more settled feel at motorway speed. Damping is fixed, so there is nothing to set up after fitting. The choice when the original dampers are worn and you want a little more than stock.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 6 BMW models including 1er (E87) and 3er Touring (E91) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eNot tested on m sport model.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404258193732,"sku":"VSJ14-A1DS2","price":490.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_cd68d54f-c827-40c3-a0c3-42e75159da16.png?v=1781341104"},{"product_id":"tein-endurapro-plus-kit-bmw-e90-e91-e92-e87-vsj14-b1ds2","title":"Tein Endurapro Plus Shock Absorbers VSJ14-B1DS2 – BMW 3 Series, 1 Series","description":"\u003cp\u003eTein EnduraPro Plus Performance Upgrade Damper Kit for 2004 Bmw 1Er, 2008 Bmw 1Er Cabriolet, 2008 Bmw 1Er Coupe and 3 additional applications — Tein Endurapro Plus Kit, Bmw E90\/E91\/E92\/E87 - VSJ14-B1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro Plus is the adjustable version of Tein's OE-replacement damper. It keeps standard ride height and springs, but adds a 16-step damping adjuster so ride firmness can be tuned after the car is on the road — softer for poor surfaces, firmer for a loaded car or a quick drive. Useful when you want the option without lowering the car.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 6 BMW models including 1er (E87) and 3er Touring (E91) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro Plus kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eNot tested on m sport model.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404258226500,"sku":"VSJ14-B1DS2","price":556.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSJ14-B1DS2.jpg?v=1776416937"},{"product_id":"tein-endurapro-kit-bmw-e46-vsv10-a1ds2","title":"Tein Endurapro Shock Absorbers VSV10-A1DS2 – BMW 3 Series (E46)","description":"\u003cp\u003eTein EnduraPro OE Replacement Damper Kit for 1998–2001 Bmw 3Er, 2000 Bmw 3Er Cabriolet, 2001 Bmw 3Er Compact and 2 additional applications — Tein Endurapro Kit, Bmw E46 - VSV10-A1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro is Tein's OE-replacement damper with slightly firmer valving than the factory part. Ride height and spring rates stay standard; what changes is body control — less float over undulations and a more settled feel at motorway speed. Damping is fixed, so there is nothing to set up after fitting. The choice when the original dampers are worn and you want a little more than stock.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 5 BMW models including 3 Series (E46) and 3er Coupe (E46) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e4Dr\/2dr\/wagon\/convertible. Not incl. M3 \u0026amp; awdrr: includes bump rubber \u0026amp; dust boot.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404273660228,"sku":"VSV10-A1DS2","price":509.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSV10-A1DS2.jpg?v=1776416882"},{"product_id":"tein-endurapro-plus-kit-bmw-e46-vsv10-b1ds2","title":"Tein Endurapro Plus Shock Absorbers VSV10-B1DS2 – BMW 3 Series (E46)","description":"\u003cp\u003eTein EnduraPro Plus Performance Upgrade Damper Kit for 1998–2001 Bmw 3Er, 2001 Bmw 3Er Compact, 1999–2001 Bmw 3Er Coupe and 1 additional applications — Tein Endurapro Plus Kit, Bmw E46 - VSV10-B1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro Plus is the adjustable version of Tein's OE-replacement damper. It keeps standard ride height and springs, but adds a 16-step damping adjuster so ride firmness can be tuned after the car is on the road — softer for poor surfaces, firmer for a loaded car or a quick drive. Useful when you want the option without lowering the car.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 BMW models including 3 Series (E46) and 3er Touring (E46) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro Plus kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e4Dr\/2dr\/wagon. Not incl. Convertible \u0026amp; m3 \u0026amp; awd. Rr: includes bump rubber \u0026amp; dust boot.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404273692996,"sku":"VSV10-B1DS2","price":575.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSV10-B1DS2.jpg?v=1776416881"},{"product_id":"tein-endurapro-kit-e60-vsv14-a1ds2","title":"Tein Endurapro Shock Absorbers VSV14-A1DS2 – BMW 5 Series (E60)","description":"\u003cp\u003eTein EnduraPro OE Replacement Damper Kit for 2003–2007 Bmw 5Er — Tein Endurapro Kit, E60 - VSV14-A1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro is Tein's OE-replacement damper with slightly firmer valving than the factory part. Ride height and spring rates stay standard; what changes is body control — less float over undulations and a more settled feel at motorway speed. Damping is fixed, so there is nothing to set up after fitting. The choice when the original dampers are worn and you want a little more than stock.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (E60), 12\/2001–03\/2010, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e4Dr\/6cyl. Not compatible with bmw electronic and\/or air suspension equipped vehicles.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404273758532,"sku":"VSV14-A1DS2","price":528.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSV14-A1DS2.jpg?v=1776416881"},{"product_id":"bilstein-air-suspension-compressor-10-256503","title":"Bilstein Air Suspension Compressor 10-256503 – BMW 5 Series (E61)","description":"\u003cp\u003eBilstein Air suspension compressor for 5 Touring (E61), 03 — Bilstein Air suspension compressor 10-256503.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.63 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eThe compressor is what feeds the air-suspension system. When it fails, the car sits low, takes a long time to rise, or throws a levelling fault. This is a Bilstein replacement unit built to the pressure and duty-cycle the original system expects.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5er Touring (E61), 03\/2004–12\/2010 — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 37 10 6 79 3778, 37 10 678 9 937, 37 20 6 792 855, 3710 679 3778, 6 789 937, 6 792 855, 6 793 778\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein air-suspension compressor unit. Relay, air lines, dryer and mounting rubbers are not included unless the specification table lists them — re-use the vehicle's own where they are serviceable.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the air system is leak-free when the compressor is fitted. A leaking air spring makes the compressor run continuously and burn out; that is a consequence of the leak, not a compressor defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615405879620,"sku":"10-256503","price":551.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/10-256503_1.jpg?v=1776085002"},{"product_id":"bilstein-air-suspension-compressor-10-256510","title":"Bilstein Air Suspension Compressor 10-256510 – BMW X5 (E70)","description":"\u003cp\u003eBilstein Air suspension compressor for the BMW X5 (E70) — Bilstein Air suspension compressor 10-256510.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.67 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eThe compressor is what feeds the air-suspension system. When it fails, the car sits low, takes a long time to rise, or throws a levelling fault. This is a Bilstein replacement unit built to the pressure and duty-cycle the original system expects.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW X5 (E70), 2007–2013, AWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 3720 679 9419\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein air-suspension compressor unit. Relay, air lines, dryer and mounting rubbers are not included unless the specification table lists them — re-use the vehicle's own where they are serviceable.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the air system is leak-free when the compressor is fitted. A leaking air spring makes the compressor run continuously and burn out; that is a consequence of the leak, not a compressor defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615405945156,"sku":"10-256510","price":553.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/10-256510_1.jpg?v=1776085001"},{"product_id":"bilstein-air-suspension-module-40-221595","title":"Bilstein Air Suspension Module 40-221595 – BMW X5 (E70, F15, F85)","description":"\u003cp\u003eBilstein Air suspension module for the BMW X5 — Bilstein Air suspension module 40-221595.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Position (front\/rear):\u003c\/strong\u003e Rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Design:\u003c\/strong\u003e airbag\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePacking:\u003c\/strong\u003e packing unit: 1 pc(s)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eA Bilstein replacement air-suspension module. It reproduces the original unit's damping and air-spring behaviour so the vehicle's self-levelling system keeps working as designed — a conventional damper fitted in its place would disable levelling.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW X5 (E70), 2007–2013, AWD and BMW X5 (F15, F85), 08\/2013–07\/2018, AWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 37 12 6 773 664, 37 12 6 774 041, 37 12 6 776 995, 37 12 6 783 419, 37 12 6 783 420, 37 12 6 790 078, 37 12 6 790 079, 37 12 6 790 080, 37 12 6 790 081, 37 12 6 790 082, 37 12 6 790 083, 37 12 6 795 013, 3712 6 790 081, 6 773 664, 6 776 995, 6 783 419, 6 783 420, 6 790 078, 6 790 079, 6 790 080, 6 790 081, 6 790 082, 6 790 083\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein air-suspension module for the rear axle (either side) — a single corner, not a pair. Order two to do an axle. Air lines, level sensors and fixings are re-used from the vehicle; they are not supplied with the unit.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615417348420,"sku":"40-221595","price":176.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/40-221595.jpg?v=1776007488"},{"product_id":"bilstein-air-suspension-module-40-231990","title":"Bilstein Air Suspension Module 40-231990 – BMW 5 Series (E39)","description":"\u003cp\u003eBilstein Air suspension module for BMW 5(E39) kombi 05 — Bilstein Air suspension module 40-231990.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Position (front\/rear):\u003c\/strong\u003e Rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Side:\u003c\/strong\u003e Rear axle left\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShock absorber's type:\u003c\/strong\u003e air spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Design:\u003c\/strong\u003e airbag\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuspension:\u003c\/strong\u003e For vehicles with sports suspension\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePacking:\u003c\/strong\u003e packing unit: 1 pc(s)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eA Bilstein replacement air-suspension module. It reproduces the original unit's damping and air-spring behaviour so the vehicle's self-levelling system keeps working as designed — a conventional damper fitted in its place would disable levelling.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (E39), 09\/1995–12\/2003, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1 094 613, 1 095 081, 37 12 1 094 613, 37 12 1 095 081\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein air-suspension module for the rear left — a single corner, not a pair. Order two to do an axle. Air lines, level sensors and fixings are re-used from the vehicle; they are not supplied with the unit.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615417446724,"sku":"40-231990","price":258.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/40-231990_1.jpg?v=1776084964"},{"product_id":"bilstein-air-suspension-module-40-232003","title":"Bilstein Air Suspension Module 40-232003 – BMW 5 Series (E39)","description":"\u003cp\u003eBilstein Air suspension module for BMW 5(E39) kombi 05 — Bilstein Air suspension module 40-232003.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Position (front\/rear):\u003c\/strong\u003e Rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Side:\u003c\/strong\u003e Rear axle right\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShock absorber's type:\u003c\/strong\u003e air spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Design:\u003c\/strong\u003e airbag\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSuspension:\u003c\/strong\u003e For vehicles with sports suspension\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePacking:\u003c\/strong\u003e packing unit: 1 pc(s)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eA Bilstein replacement air-suspension module. It reproduces the original unit's damping and air-spring behaviour so the vehicle's self-levelling system keeps working as designed — a conventional damper fitted in its place would disable levelling.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (E39), 09\/1995–12\/2003, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1 094 614, 1 095 082, 37 12 1 094 614, 37 12 1 095 082\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein air-suspension module for the rear right — a single corner, not a pair. Order two to do an axle. Air lines, level sensors and fixings are re-used from the vehicle; they are not supplied with the unit.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615418003780,"sku":"40-232003","price":259.03,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/40-232003_1.jpg?v=1776084963"},{"product_id":"bilstein-air-suspension-module-44-219215","title":"Bilstein Air Suspension Module 44-219215 – BMW 7 Series (E65, E66, E67)","description":"\u003cp\u003eBilstein Air suspension module for BMW E65\/E66 — Bilstein Air suspension module 44-219215.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.62 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eA Bilstein replacement air-suspension module. It reproduces the original unit's damping and air-spring behaviour so the vehicle's self-levelling system keeps working as designed — a conventional damper fitted in its place would disable levelling.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 7er (E65, E66, E67), 07\/2001–12\/2009, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 37 10 6 778 797, 37 12 6 767 127, 37 12 6 785 535, 6 767 127, 6 778 797, 6 785 535\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein air-suspension module — a single corner, not a pair. Order two to do an axle. Air lines, level sensors and fixings are re-used from the vehicle; they are not supplied with the unit.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615425114436,"sku":"44-219215","price":940.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/44-219215_1.jpg?v=1776084941"},{"product_id":"bilstein-shock-absorber-19-019802","title":"Bilstein B4 Shock Absorbers 19-019802 – Alpina B6 \/ Alpina C1 \/ BMW 3 Series","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-019802\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E21), 06\/1975–03\/1984, RWD, Alpina B6 (E21), 03\/1978–03\/1983, RWD and Alpina C1 (E21), 03\/1980–07\/1983, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 33 52 1 123 547, 1 123 547.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615428391236,"sku":"19-019802","price":63.62,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-019802.jpg?v=1776007400"},{"product_id":"bilstein-shock-absorber-19-020068","title":"Bilstein B4 Shock Absorbers 19-020068 – BMW 5 Series (E34)","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-020068\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (E34), 02\/1987–12\/1995 and BMW 5er Touring (E34), 07\/1991–07\/1996, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 33 52 1 138 669, 2 226 592, 33 52 1 092 278, 33 52 2 226 592, 1 138 669.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615429767492,"sku":"19-020068","price":132.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-020068.jpg?v=1776007401"},{"product_id":"bilstein-shock-absorber-19-020174","title":"Bilstein B4 Shock Absorbers 19-020174 – BMW 5 Series, 6 Series","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-020174\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 6er (E24), 10\/1975–04\/1989, RWD and BMW 5 Series (E28), 05\/1981–12\/1987, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1 126 645, 33 52 1 126 645.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615430652228,"sku":"19-020174","price":154.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-020174.jpg?v=1776007400"},{"product_id":"bilstein-shock-absorber-19-027531","title":"Bilstein B4 Shock Absorbers 19-027531 – BMW 3 Series (E36)","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-027531\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 3 Series (E36), 09\/1990–11\/1998, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 33 52 1 091 629, 1135888, 33521091999, 33521125156, 33521125473.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615430684996,"sku":"19-027531","price":77.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-027531.jpg?v=1776007401"},{"product_id":"bilstein-shock-absorber-19-028675","title":"Bilstein B4 Shock Absorbers 19-028675 – BMW 7 Series (E38)","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-028675\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 7er (E38), 03\/1994–12\/2001, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 33 52 1 091 421, 1 096 151, 1 091 421, 33 52 1 096 151.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615433535812,"sku":"19-028675","price":89.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-028675.jpg?v=1776007401"},{"product_id":"bilstein-shock-absorber-19-067346","title":"Bilstein B4 Shock Absorbers 19-067346 – BMW 5 Series (E39)","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-067346\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits BMW 5 Series (E39), 09\/1995–12\/2003, RWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 33 52 1 093 646, 33 52 1 094 467, 1 093 646, 1 093 647, 33 52 1 093 647.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615443071300,"sku":"19-067346","price":122.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-067346.jpg?v=1776007401"},{"product_id":"bilstein-shock-absorber-19-103112","title":"Bilstein B4 Shock Absorbers 19-103112 – BMW 3 Series (E46)","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-103112\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 BMW models including 3 Series (E46) and 3er Touring (E46) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 33 52 1 091 274, 33 52 1 092 489, 33 52 1 092 309, 33 52 6 750 781, 33 52 6 750 783.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615445233988,"sku":"19-103112","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-103112.jpg?v=1776007402"},{"product_id":"bilstein-shock-absorber-19-103150","title":"Bilstein B4 Shock Absorbers 19-103150 – BMW 3 Series (E36, E46)","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-103150\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 5 BMW models including 3 Series (E36) and 3er Coupe (E46) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 33 52 2 282 461, 1 090 831, 1 095 913, 2 227 488, 2 282 461.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615445496132,"sku":"19-103150","price":47.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-103150.jpg?v=1776007400"}],"url":"https:\/\/suspengo.com\/collections\/suspension-bmw\/series-b8.oembed","provider":"Suspengo","version":"1.0","type":"link"}