{"title":"Ford Focus Shock Absorbers \u0026 Suspension","description":"\u003cp\u003eSuspension for the Ford Focus across the Mk1 (DAW), Mk2 (DA3) and Mk3 (DYB) generations. \u003ca href=\"\/collections\/suspension-ford-focus\/series-b4\"\u003eBilstein B4\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-ford-focus\/series-b6\"\u003eB6\u003c\/a\u003e cover standard ride height, \u003ca href=\"\/collections\/suspension-ford-focus\/series-b12\"\u003eB12\u003c\/a\u003e kits lower the car on matched dampers and springs, and \u003ca href=\"\/collections\/suspension-ford-focus\/series-b14\"\u003eB14\u003c\/a\u003e, \u003ca href=\"\/collections\/suspension-ford-focus\/series-b16\"\u003eB16\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-ford-focus\/series-street-advance\"\u003eTein Street Advance Z\u003c\/a\u003e coilovers set ride height directly.\u003c\/p\u003e\n\u003ch2\u003eWhich variants this covers\u003c\/h2\u003e\n\u003cp\u003eThree generations are listed — DAW, DA3 and DYB — in hatchback and estate form, including the ST performance variants. Build date decides the generation more reliably than the model year, because the changeovers fall mid-year. ST cars use their own part numbers and should not be matched from a standard listing. For other Ford models see \u003ca href=\"\/collections\/suspension-ford\"\u003eFord suspension\u003c\/a\u003e, or the \u003ca href=\"\/collections\/suspension-ford-mondeo\"\u003eMondeo\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch2\u003eChoosing between the ranges\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/suspension-ford-focus\/series-b6\"\u003eBilstein B6\u003c\/a\u003e is the largest group here, firmer than standard at the original ride height — a good match for a Focus whose damping has gone soft but which the owner does not want lowered, and for ST cars in particular. \u003ca href=\"\/collections\/suspension-ford-focus\/series-b4\"\u003eBilstein B4\u003c\/a\u003e is the OE-comparable alternative that restores the factory ride exactly. \u003ca href=\"\/collections\/suspension-ford-focus\/series-b12\"\u003eBilstein B12\u003c\/a\u003e is unusually well stocked for this car and pairs shortened dampers with matched lowering springs as one package. \u003ca href=\"\/collections\/suspension-ford-focus\/series-s-tech\"\u003eTein S.Tech\u003c\/a\u003e springs lower a car on its existing dampers, and \u003ca href=\"\/collections\/suspension-ford-focus\/series-b8\"\u003eBilstein B8\u003c\/a\u003e is the shortened damper for cars already dropped by roughly 30–40 mm. \u003ca href=\"\/collections\/suspension-ford-focus\/series-endurapro\"\u003eTein EnduraPro\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-ford-focus\/series-endurapro-plus\"\u003eEnduraPro Plus\u003c\/a\u003e cover OE height from the Tein side. \u003ca href=\"\/collections\/suspension-ford-focus\/series-b14\"\u003eB14\u003c\/a\u003e, \u003ca href=\"\/collections\/suspension-ford-focus\/series-b16\"\u003eB16\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-ford-focus\/series-street-advance\"\u003eStreet Advance Z\u003c\/a\u003e give adjustable height.\u003c\/p\u003e\n\u003ch2\u003eWhat to check before ordering\u003c\/h2\u003e\n\u003cp\u003eBuy front and rear separately, fit in axle pairs and align afterwards. Strut support bearings and \u003ca href=\"\/collections\/suspension-ford-focus\/series-b1\"\u003eprotection kits\u003c\/a\u003e are worth renewing with the dampers. The Focus caveat is the rear: estate and hatchback rear dampers differ, and the Mk1 and Mk2 rear setups are not interchangeable despite looking similar. Check body style as well as generation before ordering.\u003c\/p\u003e\n\u003ch2\u003eCommon questions for this chassis\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo ST models use different dampers?\u003c\/strong\u003e Yes. Sports suspension has its own part numbers — do not order from a standard listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I tell Mk2 from Mk3?\u003c\/strong\u003e By build date rather than model year. The vehicle selector resolves it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit or springs to lower it?\u003c\/strong\u003e A B12 kit if the dampers are tired, S.Tech springs if they are not.\u003c\/p\u003e","products":[{"product_id":"tein-street-advance-z-damper-kit-bk3p-bkep-gsm80-91as3","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSM80-91AS3 – Mazda 3 \/ Ford Focus and more","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 2005 Ford Focus, 2003 Mazda Axela Sedan, 2003 Mazda Axela Sport and 4 additional applications — Tein Street Advance Z Damper Kit, Bk3P\/Bkep - GSM80-91AS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Ford and Mazda, including Mazda Axela Sedan (BK3P) and Mazda Mazda3 (BK3P) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404191117636,"sku":"GSM80-91AS3","price":979.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSM80-91AS3.jpg?v=1776621808"},{"product_id":"tein-s-tech-spring-set-focus-c346-skgb2-s3b00","title":"Tein S.Tech Lowering Springs SKGB2-S3B00 – Ford Focus ST (C346)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2012–2013 Ford Focus St — Tein S.Tech Spring Set, Focus C346 - SKGB2-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus ST (C346), from 2012, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404203012420,"sku":"SKGB2-S3B00","price":141.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/tein-coil-spring-set_042.png?v=1786997392"},{"product_id":"tein-s-tech-spring-set-daw-skg40-s3b00","title":"Tein S.Tech Lowering Springs SKG40-S3B00 – Ford Focus (DAW)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2000 Ford Focus — Tein S.Tech Spring Set, Daw - SKG40-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus (DAW), 2000–2004, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e3Dr\/4cyl\/exc wagon. Ft: cut bump rubber at 15mm from the bottom and use the upper portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404204978500,"sku":"SKG40-S3B00","price":141.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_338b4d4a-a73e-41bf-be18-fa06f63a27ea.png?v=1786978232"},{"product_id":"tein-endurapro-kit-blef-blffw-vsm98-a1ds2","title":"Tein Endurapro Shock Absorbers VSM98-A1DS2 – Mazda 3 \/ Ford Focus and more","description":"\u003cp\u003eTein EnduraPro OE Replacement Damper Kit for 2005 Ford Focus, 2009 Mazda Axela Sedan, 2009–2011 Mazda Axela Sport and 4 additional applications — Tein Endurapro Kit, Blef#\/Blffw - VSM98-A1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro is Tein's OE-replacement damper with slightly firmer valving than the factory part. Ride height and spring rates stay standard; what changes is body control — less float over undulations and a more settled feel at motorway speed. Damping is fixed, so there is nothing to set up after fitting. The choice when the original dampers are worn and you want a little more than stock.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Ford, Mazda and Volvo, including Ford Focus (DA3) and Volvo C30 (533) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404263534916,"sku":"VSM98-A1DS2","price":490.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSM98-A1DS2.jpg?v=1776416919"},{"product_id":"tein-endurapro-plus-kit-blef-blffw-vsm98-b1ds3","title":"Tein Endurapro Plus Shock Absorbers VSM98-B1DS3 – Ford Focus \/ Mazda 3 \/ Mazda Axela","description":"\u003cp\u003eTein EnduraPro Plus Performance Upgrade Damper Kit for 2005 Ford Focus, 2009 Mazda Axela Sedan, 2009–2011 Mazda Axela Sport and 1 additional applications — Tein Endurapro Plus Kit, Blef#\/Blffw - VSM98-B1DS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro Plus is the adjustable version of Tein's OE-replacement damper. It keeps standard ride height and springs, but adds a 16-step damping adjuster so ride firmness can be tuned after the car is on the road — softer for poor surfaces, firmer for a loaded car or a quick drive. Useful when you want the option without lowering the car.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus (DA3), 2005–2010, FWD, Mazda Axela Sedan (BLEFP), 06\/2009–09\/2011, FWD and Mazda Mazda3 (BL), 2010–2013, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro Plus kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eRr: includes bump rubber, dust boot \u0026amp; upper mount.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404263567684,"sku":"VSM98-B1DS3","price":670.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSM98-B1DS3.jpg?v=1776416918"},{"product_id":"bilstein-shock-absorber-19-065885","title":"Bilstein B4 Shock Absorbers 19-065885 – Ford Focus I (DNW)","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-065885\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 Van Estate (DNW), 08\/1998–03\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 3S4Z 18125-CA, YS4Z 18125-EA, YS4Z 18125-AJ, 6S4Z 18125-CA, 6S4Z 18125-F.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615443038532,"sku":"19-065885","price":78.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-065885.jpg?v=1776007400"},{"product_id":"bilstein-shock-absorber-19-119526","title":"Bilstein B4 Shock Absorbers 19-119526 – Ford Focus \/ Mazda 3 \/ Volvo C30","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-119526\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Ford, Mazda and Volvo, including Ford Focus 2 (DA, HCP, DP) and Ford Focus 2 Saloon (DB, FCH, DH) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 31255199, 31290276, BBM2-28-910D, BGV4-28-910, BGV9-28-910.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615450280260,"sku":"19-119526","price":54.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-119526.jpg?v=1776007400"},{"product_id":"bilstein-shock-absorber-19-138411","title":"Bilstein B4 Shock Absorbers 19-138411 – Ford Focus II (DA, HCP, DP, FFS)","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-138411\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 2 (DA, HCP, DP), 07\/2004–09\/2013, FWD and Ford Focus 2 Estate (DA, FFS, DS), 07\/2004–09\/2012, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1363951, 4M51-18K077-AE, 1363952, 4M51-18080-RAB, 4M51-18080-BAD.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615455064388,"sku":"19-138411","price":57.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-138411_1.jpg?v=1776084923"},{"product_id":"bilstein-shock-absorber-19-191072","title":"Bilstein B4 Shock Absorbers 19-191072 – Ford Focus IV (HN)","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 19-191072\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 4 (HN), 01\/2018–11\/2025, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 2248977.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615482261828,"sku":"19-191072","price":68.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-191072.jpg?v=1776007410"},{"product_id":"bilstein-shock-absorber-19-295817","title":"Bilstein B4 Shock Absorbers 19-295817 – Ford Focus IV (HN)","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 19-295817\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 4 (HN), 01\/2018–11\/2025, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 2279421.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615550353732,"sku":"19-295817","price":60.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-295817_1.jpg?v=1779441308"},{"product_id":"bilstein-shock-absorber-19-298757","title":"Bilstein B4 Shock Absorbers 19-298757 – Ford Focus IV (HN)","description":"\u003cp\u003eBilstein shock absorber — Bilstein Shock Absorber 19-298757\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 4 (HN), 01\/2018–11\/2025, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 2248978, KX61-18080-SDD, 2389215, JX61-18080-EDC.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615550845252,"sku":"19-298757","price":68.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-298757_1.jpg?v=1779441309"},{"product_id":"bilstein-shock-absorber-22-051219","title":"Bilstein B4 Shock Absorbers 22-051219 – Ford Focus I (DAW, DBW, DNW)","description":"\u003cp\u003eBilstein B4 OEM Replacement Front Right shock absorber — Bilstein Shock Absorber 22-051219\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 (DAW, DBW), 09\/1998–11\/2009, FWD and Ford Focus 1 Van Estate (DNW), 08\/1998–03\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1073884, 2M5Z 18124-BD, 3U2Z 18124-CJ, 4S4Z 18124-LA, 98AX18045MD.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front right — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615577190724,"sku":"22-051219","price":70.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-051219_1.jpg?v=1776084808"},{"product_id":"bilstein-shock-absorber-22-051226","title":"Bilstein B4 Shock Absorbers 22-051226 – Ford Focus I (DAW, DBW, DNW)","description":"\u003cp\u003eBilstein B4 OEM Replacement Front Left shock absorber — Bilstein Shock Absorber 22-051226\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 (DAW, DBW), 09\/1998–11\/2009, FWD and Ford Focus 1 Van Estate (DNW), 08\/1998–03\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1074112, 2M5Z 18124-AC, 2M5Z 18124-BE, 3U2Z 18124-CK, 4S4Z 18124-LB.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front left — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615577256260,"sku":"22-051226","price":74.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-051226_1.jpg?v=1776084807"},{"product_id":"bilstein-shock-absorber-22-112811","title":"Bilstein B4 Shock Absorbers 22-112811 – Ford Focus \/ Mazda 3 and more","description":"\u003cp\u003eBilstein B4 OEM Replacement Front Left shock absorber — Bilstein Shock Absorber 22-112811\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 9 models from Ford, Mazda and Volvo, including Ford Focus C-Max (DM2) and Mazda 3 (BK) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e BP4S-34-900, 30748361, 31212945, 31277022, 31277024.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front left — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615580008772,"sku":"22-112811","price":84.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-112811_1.jpg?v=1776084795"},{"product_id":"bilstein-shock-absorber-22-112880","title":"Bilstein B4 Shock Absorbers 22-112880 – Ford Focus \/ Mazda 3 and more","description":"\u003cp\u003eBilstein B4 OEM Replacement Front Right shock absorber — Bilstein Shock Absorber 22-112880\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 9 models from Ford, Mazda and Volvo, including Ford Focus C-Max (DM2) and Mazda 3 (BK) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 30748360, 31277015, 31277030, 31277031, 31277599.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front right — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615580041540,"sku":"22-112880","price":85.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-112880_1.jpg?v=1776084794"},{"product_id":"bilstein-shock-absorber-22-295804","title":"Bilstein B4 Shock Absorbers 22-295804 – Ford Focus IV (HN, HP)","description":"\u003cp\u003eBilstein Front Left shock absorber — Bilstein Shock Absorber 22-295804\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 4 (HN), 01\/2018–11\/2025, FWD and Ford Focus 4 Estate (HP), 09\/2018–11\/2025, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 2279413, 2279415, 2286705, 2375219, 2390085.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front left — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615653704004,"sku":"22-295804","price":81.14,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-295804_1.jpg?v=1779441456"},{"product_id":"bilstein-shock-absorber-22-295903","title":"Bilstein B4 Shock Absorbers 22-295903 – Ford Focus IV (HN, HP)","description":"\u003cp\u003eBilstein Front Right shock absorber — Bilstein Shock Absorber 22-295903\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 4 (HN), 01\/2018–11\/2025, FWD and Ford Focus 4 Estate (HP), 09\/2018–11\/2025, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 2279419, 2367851, 2375217, 2390092, 2390102.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front right — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615653769540,"sku":"22-295903","price":86.54,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-295903_1.jpg?v=1779441457"},{"product_id":"bilstein-shock-absorber-22-295781","title":"Bilstein B6 Shock Absorbers 22-295781 – Ford Focus IV (HN)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Focus 4 (HN) — Bilstein Shock Absorber 22-295781.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 4 (HN), 01\/2018–11\/2025, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615733068100,"sku":"22-295781","price":175.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-295781_1.jpg?v=1779441457"},{"product_id":"bilstein-shock-absorber-22-296092","title":"Bilstein B6 Shock Absorbers 22-296092 – Ford Focus IV (HN)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Focus 4 (HN) — Bilstein Shock Absorber 22-296092.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 4 (HN), 01\/2018–11\/2025, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615733133636,"sku":"22-296092","price":175.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-296092_1.jpg?v=1779441457"},{"product_id":"bilstein-shock-absorber-24-066655","title":"Bilstein B6 Shock Absorbers 24-066655 – Ford Focus I (DAW, DBW)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Focus 1 (DAW, DBW) — Bilstein Shock Absorber 24-066655.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 (DAW, DBW), 09\/1998–11\/2009, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615784317252,"sku":"24-066655","price":162.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-066655_1.jpg?v=1779441493"},{"product_id":"bilstein-shock-absorber-24-066662","title":"Bilstein B6 Shock Absorbers 24-066662 – Ford Focus I (DAW, DBW)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Focus 1 (DAW, DBW) — Bilstein Shock Absorber 24-066662.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 (DAW, DBW), 09\/1998–11\/2009, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615785267524,"sku":"24-066662","price":170.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-066662_1.jpg?v=1776084188"},{"product_id":"bilstein-shock-absorber-24-066679","title":"Bilstein B6 Shock Absorbers 24-066679 – Ford Focus I (DNW)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Focus 1 Van Estate (DNW) — Bilstein Shock Absorber 24-066679.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 Van Estate (DNW), 08\/1998–03\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615785333060,"sku":"24-066679","price":159.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-066679_1.jpg?v=1776084186"},{"product_id":"bilstein-shock-absorber-24-196529","title":"Bilstein B6 Shock Absorbers 24-196529 – Ford Focus \/ Mazda 3 \/ Volvo C30","description":"\u003cp\u003eBilstein B6 Performance shock absorber for Ford Focus 2, Volvo C30 and Mazda 3 — Bilstein Shock Absorber 24-196529.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 2 (DA, HCP, DP), 07\/2004–09\/2013, FWD, Volvo C30 (533), 2006–2012, FWD and Mazda 3 (BL), 12\/2008–09\/2014, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 30635523, 30681610, 30683573, 30714086, 30714088, 30736768 and 32 more.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615810597188,"sku":"24-196529","price":154.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-196529_1.jpg?v=1776084014"},{"product_id":"bilstein-shock-absorber-24-196550","title":"Bilstein B6 Shock Absorbers 24-196550 – Ford Focus \/ Mazda 3 \/ Volvo C30","description":"\u003cp\u003eBilstein B6 Performance shock absorber for Ford Focus 2, Volvo C30 and Mazda 3 — Bilstein Shock Absorber 24-196550.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 2 (DA, HCP, DP), 07\/2004–09\/2013, FWD, Volvo C30 (533), 2006–2012, FWD and Mazda 3 (BL), 12\/2008–09\/2014, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615810629956,"sku":"24-196550","price":154.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-196550_1.jpg?v=1776084013"},{"product_id":"bilstein-shock-absorber-24-233118","title":"Bilstein B6 Shock Absorbers 24-233118 – Ford Focus II (DA, HCP, DP)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Focus 2 (DA, HCP, DP) — Bilstein Shock Absorber 24-233118.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 2 (DA, HCP, DP), 07\/2004–09\/2013, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1669336, 9M5Y-5K570-AA.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615813382468,"sku":"24-233118","price":233.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-233118_1.jpg?v=1779441509"},{"product_id":"bilstein-shock-absorber-24-311731","title":"Bilstein B6 Shock Absorbers 24-311731 – Ford Focus IV (HN)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Focus 4 (HN) — Bilstein Shock Absorber 24-311731.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 4 (HN), 01\/2018–11\/2025, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615824851268,"sku":"24-311731","price":149.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-311731_1.jpg?v=1779441530"},{"product_id":"bilstein-shock-absorber-35-051398","title":"Bilstein B6 Shock Absorbers 35-051398 – Ford Focus I (DAW, DBW, DNW)","description":"\u003cp\u003eBilstein B6 Sport Front Left shock absorber — Bilstein Shock Absorber 35-051398\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 Sport is the sport-tuned damper for standard ride height, sold under Bilstein's earlier B6 naming. Firmer rebound control than the OE part means less float over crests and tighter body movement through quick direction changes, while ride height and spring rates stay untouched. Suited to spirited road driving on a car you do not want to lower. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 (DAW, DBW), 09\/1998–11\/2009, FWD and Ford Focus 1 Van Estate (DNW), 08\/1998–03\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 Sport damper unit for the front left — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615838875972,"sku":"35-051398","price":233.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-051398.jpg?v=1776007487"},{"product_id":"bilstein-shock-absorber-35-051404","title":"Bilstein B6 Shock Absorbers 35-051404 – Ford Focus I (DAW, DBW, DNW)","description":"\u003cp\u003eBilstein B6 Sport Front Right shock absorber — Bilstein Shock Absorber 35-051404\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 Sport is the sport-tuned damper for standard ride height, sold under Bilstein's earlier B6 naming. Firmer rebound control than the OE part means less float over crests and tighter body movement through quick direction changes, while ride height and spring rates stay untouched. Suited to spirited road driving on a car you do not want to lower. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 (DAW, DBW), 09\/1998–11\/2009, FWD and Ford Focus 1 Van Estate (DNW), 08\/1998–03\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 Sport damper unit for the front right — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615838908740,"sku":"35-051404","price":244.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-051404.jpg?v=1776007487"},{"product_id":"bilstein-shock-absorber-35-051428","title":"Bilstein B8 Shock Absorbers 35-051428 – Ford Focus I (DAW, DBW, DNW)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Focus 1 and Focus 1 Van Estate — Bilstein Shock Absorber 35-051428.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 (DAW, DBW), 09\/1998–11\/2009, FWD and Ford Focus 1 Van Estate (DNW), 08\/1998–03\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615838974276,"sku":"35-051428","price":276.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-051428_1.jpg?v=1776083784"},{"product_id":"bilstein-shock-absorber-35-110736","title":"Bilstein B6 Shock Absorbers 35-110736 – Ford Focus \/ Mazda 3 and more","description":"\u003cp\u003eBilstein B6 Sport Front Left shock absorber — Bilstein Shock Absorber 35-110736\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 Sport is the sport-tuned damper for standard ride height, sold under Bilstein's earlier B6 naming. Firmer rebound control than the OE part means less float over crests and tighter body movement through quick direction changes, while ride height and spring rates stay untouched. Suited to spirited road driving on a car you do not want to lower. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from Ford, Mazda and Volvo, including Ford Focus C-Max (DM2) and Mazda 3 (BK) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 31212945, 31277016, 31277022, 31277590, 31277596.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 Sport damper unit for the front left — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615841202500,"sku":"35-110736","price":183.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-110736.jpg?v=1776007485"},{"product_id":"bilstein-shock-absorber-35-110743","title":"Bilstein B6 Shock Absorbers 35-110743 – Ford Focus \/ Mazda 3 and more","description":"\u003cp\u003eBilstein B6 Sport Front Right shock absorber — Bilstein Shock Absorber 35-110743\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 Sport is the sport-tuned damper for standard ride height, sold under Bilstein's earlier B6 naming. Firmer rebound control than the OE part means less float over crests and tighter body movement through quick direction changes, while ride height and spring rates stay untouched. Suited to spirited road driving on a car you do not want to lower. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from Ford, Mazda and Volvo, including Ford Focus C-Max (DM2) and Mazda 3 (BK) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 30748848, 31200271, 31277031, 31277593, 31277601.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 Sport damper unit for the front right — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615841268036,"sku":"35-110743","price":176.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-110743.jpg?v=1776007487"},{"product_id":"bilstein-shock-absorber-35-110767","title":"Bilstein B8 Shock Absorbers 35-110767 – Ford Focus \/ Mazda 3 and more","description":"\u003cp\u003eBilstein B8 Sprint Front Left shock absorber — Bilstein Shock Absorber 35-110767\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Left\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from Ford, Mazda and Volvo, including Ford Focus C-Max (DM2) and Mazda 3 (BK) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front left — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615841300804,"sku":"35-110767","price":191.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-110767.jpg?v=1776007487"},{"product_id":"bilstein-shock-absorber-35-110774","title":"Bilstein B8 Shock Absorbers 35-110774 – Ford Focus \/ Mazda 3 and more","description":"\u003cp\u003eBilstein B8 Sprint Front Right shock absorber — Bilstein Shock Absorber 35-110774\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front Right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from Ford, Mazda and Volvo, including Ford Focus C-Max (DM2) and Mazda 3 (BK) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front right — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615841333572,"sku":"35-110774","price":192.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-110774.jpg?v=1776007488"},{"product_id":"bilstein-shock-absorber-35-233091","title":"Bilstein B6 Shock Absorbers 35-233091 – Ford Focus II (DA, HCP, DP)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Focus 2 (DA, HCP, DP) — Bilstein Shock Absorber 35-233091.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 2 (DA, HCP, DP), 07\/2004–09\/2013, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1633560, 9M5Y-18K001-AC.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615848575300,"sku":"35-233091","price":425.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-233091_1.jpg?v=1779441562"},{"product_id":"bilstein-shock-absorber-35-233107","title":"Bilstein B6 Shock Absorbers 35-233107 – Ford Focus II (DA, HCP, DP)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Ford Focus 2 (DA, HCP, DP) — Bilstein Shock Absorber 35-233107.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 2 (DA, HCP, DP), 07\/2004–09\/2013, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1633561, 9M5Y-18045-AC.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615848608068,"sku":"35-233107","price":425.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-233107_1.jpg?v=1779441562"},{"product_id":"bilstein-suspension-set-46-181282","title":"Bilstein B12 Suspension Set 46-181282 – Ford Focus II (DA, HCP, DP, DB)","description":"\u003cp\u003eBilstein B12 Suspension set for the Ford Focus 2 and Focus 2 Saloon — Bilstein Suspension set 46-181282.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.54 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 2 (DA, HCP, DP), 07\/2004–09\/2013, FWD and Ford Focus 2 Saloon (DB, FCH, DH), 04\/2005–09\/2013, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615864664388,"sku":"46-181282","price":1141.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_3f1d59dc-7a49-4c37-9a9b-585adac1e3d3.jpg?v=1786966662"},{"product_id":"bilstein-suspension-set-46-181299","title":"Bilstein B12 Suspension Set 46-181299 – Ford Focus II (DA, HCP, DP, DB)","description":"\u003cp\u003eBilstein B12 Suspension set for the Ford Focus 2 and Focus 2 Saloon — Bilstein Suspension set 46-181299.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27.54 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 2 (DA, HCP, DP), 07\/2004–09\/2013, FWD and Ford Focus 2 Saloon (DB, FCH, DH), 04\/2005–09\/2013, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615864828228,"sku":"46-181299","price":1141.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/46-181299_1.jpg?v=1779107997"},{"product_id":"bilstein-suspension-set-46-181305","title":"Bilstein B12 Suspension Set 46-181305 – Ford Focus II (DA, HCP, DP)","description":"\u003cp\u003eBilstein B12 Suspension set for the Ford Focus 2 (DA, HCP, DP) — Bilstein Suspension set 46-181305.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 2 (DA, HCP, DP), 07\/2004–09\/2013, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615864860996,"sku":"46-181305","price":1156.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_39809208-deb3-44f0-a3fc-2f2dcb596b9c.jpg?v=1786966662"},{"product_id":"bilstein-suspension-set-46-181312","title":"Bilstein B12 Suspension Set 46-181312 – Ford Focus II (DA, HCP, DP)","description":"\u003cp\u003eBilstein B12 Suspension set for the Ford Focus 2 (DA, HCP, DP) — Bilstein Suspension set 46-181312.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 2 (DA, HCP, DP), 07\/2004–09\/2013, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615864893764,"sku":"46-181312","price":1156.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_720e48d3-5ded-495c-b0af-bf3dbeaac2f4.jpg?v=1786966662"},{"product_id":"bilstein-suspension-set-46-181329","title":"Bilstein B12 Suspension Set 46-181329 – Ford Focus II (DA, HCP, DP)","description":"\u003cp\u003eBilstein B12 Suspension set for the Ford Focus 2 (DA, HCP, DP) — Bilstein Suspension set 46-181329.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 28.75 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 2 (DA, HCP, DP), 07\/2004–09\/2013, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615865024836,"sku":"46-181329","price":1155.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_73d37099-a7a1-4500-95d6-84784c11c028.jpg?v=1786966662"},{"product_id":"bilstein-suspension-set-46-181336","title":"Bilstein B12 Suspension Set 46-181336 – Ford Focus I (DAW, DBW)","description":"\u003cp\u003eBilstein B12 Suspension set for FOCUS I (DAW, DBW) — Bilstein Suspension set 46-181336.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.40 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 (DAW, DBW), 09\/1998–11\/2009, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615865057604,"sku":"46-181336","price":1216.11,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/46-181336_1.jpg?v=1779108055"},{"product_id":"bilstein-suspension-set-46-181343","title":"Bilstein B12 Suspension Set 46-181343 – Ford Focus I (DAW, DBW)","description":"\u003cp\u003eBilstein B12 Suspension set for FOCUS I (DAW, DBW) — Bilstein Suspension set 46-181343.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.34 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 (DAW, DBW), 09\/1998–11\/2009, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615865123140,"sku":"46-181343","price":1216.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/46-181343_1.jpg?v=1776083659"},{"product_id":"bilstein-suspension-set-46-181350","title":"Bilstein B12 Suspension Set 46-181350 – Ford Focus I (DNW)","description":"\u003cp\u003eBilstein B12 Suspension set for the Ford Focus 1 Van Estate (DNW) — Bilstein Suspension set 46-181350.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 Van Estate (DNW), 08\/1998–03\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615865188676,"sku":"46-181350","price":1219.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_00c1ee72-9f95-4378-909c-76b44aafc883.jpg?v=1786966662"},{"product_id":"bilstein-suspension-set-46-181367","title":"Bilstein B12 Suspension Set 46-181367 – Ford Focus I (DNW)","description":"\u003cp\u003eBilstein B12 Suspension set for the Ford Focus 1 Van Estate (DNW) — Bilstein Suspension set 46-181367.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 29.01 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 Van Estate (DNW), 08\/1998–03\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615865221444,"sku":"46-181367","price":1219.66,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_3d5dd4ed-1c7f-43a3-bea2-191e17b0490e.jpg?v=1786966662"},{"product_id":"bilstein-suspension-set-46-181374","title":"Bilstein B12 Suspension Set 46-181374 – Ford Focus I (DAW, DBW)","description":"\u003cp\u003eBilstein B12 Suspension set for FOCUS I sedan (DFW) — Bilstein Suspension set 46-181374.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.50 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 (DAW, DBW), 09\/1998–11\/2009, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615865254212,"sku":"46-181374","price":1237.22,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_3880db7d-2076-4a49-a2e8-3ecc3d4409b2.jpg?v=1786966662"},{"product_id":"bilstein-suspension-set-46-181381","title":"Bilstein B12 Suspension Set 46-181381 – Ford Focus I (DNW)","description":"\u003cp\u003eBilstein B12 Suspension set for the Ford Focus 1 Van Estate (DNW) — Bilstein Suspension set 46-181381.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30.28 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 1 Van Estate (DNW), 08\/1998–03\/2005, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615865286980,"sku":"46-181381","price":1209.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/46-181381_1.jpg?v=1779108062"},{"product_id":"bilstein-suspension-set-46-339270","title":"Bilstein B12 Suspension Set 46-339270 – Ford Focus IV (HN)","description":"\u003cp\u003eBilstein B12 Suspension set for the Ford Focus 4 (HN) — Bilstein Suspension set 46-339270.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.93 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 4 (HN), 01\/2018–11\/2025, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615931445572,"sku":"46-339270","price":1046.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_0f6f3161-43ac-4d5c-9177-1f8f3ec21155.jpg?v=1786966688"},{"product_id":"bilstein-suspension-set-46-339287","title":"Bilstein B12 Suspension Set 46-339287 – Ford Focus IV (HN)","description":"\u003cp\u003eBilstein B12 Suspension set for the Ford Focus 4 (HN) — Bilstein Suspension set 46-339287.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.09 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus 4 (HN), 01\/2018–11\/2025, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615931478340,"sku":"46-339287","price":1046.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_2cb108ee-d1fc-4dba-aab0-a50a57d18142.jpg?v=1786966688"},{"product_id":"bilstein-suspension-set-47-121225","title":"Bilstein B14 Suspension Set 47-121225 – Ford Focus \/ Mazda 3","description":"\u003cp\u003eBilstein B14 Suspension set for 3 (BL), 12.08-09.14 — Bilstein Suspension set 47-121225.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.35 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB14 is a height-adjustable coilover. Threaded damper bodies let you set ride height anywhere inside a tested range, so you dial in the stance rather than accept whatever a fixed spring gives you. Damping is factory-set and firm, tuned for predictable road behaviour. It is the step up from a spring-and-damper kit when you want control over how low the car actually sits.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda 3, Ford Focus 2 and Ford Focus 2 Saloon — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B14 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615936295236,"sku":"47-121225","price":1673.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/47-121225_1.jpg?v=1776083508"},{"product_id":"bilstein-suspension-set-48-121262","title":"Bilstein B16 Suspension Set 48-121262 – Ford Focus \/ Mazda 3","description":"\u003cp\u003eBilstein B16 Suspension set for Mazda 3, Ford Focus 2 and Ford Focus 2 Saloon — Bilstein Suspension set 48-121262.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.09 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB16 adds damping adjustment to the coilover platform. Ride height is set on the threaded body as on B14, and damping force is then adjusted separately, so the car can be softened for daily roads and firmed up for a track day without changing parts. It suits drivers who want one setup that covers both and are willing to spend time tuning it.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda 3, Ford Focus 2 and Ford Focus 2 Saloon — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B16 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615945470276,"sku":"48-121262","price":2628.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/48-121262_1.jpg?v=1776083441"}],"url":"https:\/\/suspengo.com\/collections\/suspension-ford-focus\/series-street-advance.oembed","provider":"Suspengo","version":"1.0","type":"link"}