{"title":"Mazda 3 Shock Absorbers \u0026 Suspension","description":"\u003cp\u003eSuspension for the Mazda 3 across the BK, BL, BM and BP generations, in hatchback and saloon form. Everything stocked here is Tein: \u003ca href=\"\/collections\/suspension-mazda-3\/series-s-tech\"\u003eS.Tech\u003c\/a\u003e springs, \u003ca href=\"\/collections\/suspension-mazda-3\/series-endurapro\"\u003eEnduraPro\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-mazda-3\/series-endurapro-plus\"\u003eEnduraPro Plus\u003c\/a\u003e dampers, and \u003ca href=\"\/collections\/suspension-mazda-3\/series-street-advance\"\u003eStreet Advance Z\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-mazda-3\/series-flex-z\"\u003eFlex Z\u003c\/a\u003e coilovers.\u003c\/p\u003e\n\u003ch2\u003eWhich variants this covers\u003c\/h2\u003e\n\u003cp\u003eFour generations are listed, covering both body styles and including the MPS performance models, all front-wheel drive. The BK and BL cars are now old enough that condition varies enormously between otherwise identical examples, while the BM and BP are closer to modern cars in both weight and spring rate. Pick by chassis code; the generations overlap by registration year.\u003c\/p\u003e\n\u003ch2\u003eChoosing between the ranges\u003c\/h2\u003e\n\u003cp\u003eThere is no Bilstein coverage for the Mazda 3 at present, so every option here comes from the Tein catalogue. For a car whose dampers are simply worn out, \u003ca href=\"\/collections\/suspension-mazda-3\/series-endurapro\"\u003eEnduraPro\u003c\/a\u003e replaces them at the original height with slightly firmer valving than standard, and \u003ca href=\"\/collections\/suspension-mazda-3\/series-endurapro-plus\"\u003eEnduraPro Plus\u003c\/a\u003e does the same with sixteen levels of adjustment you can set once the car is back together. \u003ca href=\"\/collections\/suspension-mazda-3\/series-s-tech\"\u003eS.Tech\u003c\/a\u003e springs are the straightforward route to a lower car and keep the existing dampers in place, which only works while those still have life in them. If you want control over the height itself, \u003ca href=\"\/collections\/suspension-mazda-3\/series-street-advance\"\u003eStreet Advance Z\u003c\/a\u003e is the better-equipped street coilover and \u003ca href=\"\/collections\/suspension-mazda-3\/series-flex-z\"\u003eFlex Z\u003c\/a\u003e adds full-length adjustment on top of sixteen damping settings.\u003c\/p\u003e\n\u003ch2\u003eWhat to check before ordering\u003c\/h2\u003e\n\u003cp\u003eReplace across an axle rather than corner by corner, and book the alignment for after the work rather than before. On a Mazda 3 the detail worth checking is the rear: the hatchback and saloon differ there despite sharing a front end, so matching on generation alone can still land you the wrong rear damper.\u003c\/p\u003e\n\u003ch2\u003eCommon questions for this chassis\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs Bilstein available for the Mazda 3?\u003c\/strong\u003e Not currently. This page is Tein throughout.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill BL parts fit a BM?\u003c\/strong\u003e No — treat the generations as separate cars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSprings or coilovers for a daily car?\u003c\/strong\u003e S.Tech springs, provided the dampers are sound.\u003c\/p\u003e","products":[{"product_id":"tein-street-advance-z-damper-kit-bm-fs-bm5fp-gsma8-91as3","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSMA8-91AS3 – Mazda Axela, 3","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 2013 Mazda Axela Sedan, 2013–2016 Mazda Axela Sport, 2014 Mazda Mazda3 — Tein Street Advance Z Damper Kit, Bm#Fs\/Bm5Fp - GSMA8-91AS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Axela Sedan (BM5FP), 11\/2013–04\/2019, FWD, Mazda Axela Sport (BMEFS), 11\/2013–07\/2016, FWD and Mazda Mazda3 (BMEFS), 2014–2018, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404189020484,"sku":"GSMA8-91AS3","price":920.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSMA8-91AS3.jpg?v=1776621820"},{"product_id":"tein-street-advance-z-damper-kit-bk3p-bkep-gsm80-91as3","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSM80-91AS3 – Mazda 3 \/ Ford Focus and more","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 2005 Ford Focus, 2003 Mazda Axela Sedan, 2003 Mazda Axela Sport and 4 additional applications — Tein Street Advance Z Damper Kit, Bk3P\/Bkep - GSM80-91AS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Ford and Mazda, including Mazda Axela Sedan (BK3P) and Mazda Mazda3 (BK3P) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404191117636,"sku":"GSM80-91AS3","price":979.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSM80-91AS3.jpg?v=1776621808"},{"product_id":"tein-street-advance-z-damper-kit-blefw-gsm98-91as3","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSM98-91AS3 – Mazda 3, Axela","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 2009 Mazda Axela Sedan, 2009–2011 Mazda Axela Sport, 2010 Mazda Mazda3 and 3 additional applications — Tein Street Advance Z Damper Kit, Blefw - GSM98-91AS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Axela Sedan and Mazda3 — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404191281476,"sku":"GSM98-91AS3","price":979.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSM98-91AS3.jpg?v=1776621806"},{"product_id":"tein-street-advance-z-damper-kit-bp-p-bpfj3p-gsw02-91as3","title":"Tein Street Advance Shock Absorbers (Damper Kit) GSW02-91AS3 – Mazda 3 (BP\/P, BP5P, BPFP, BPEP)","description":"\u003cp\u003eTein Street Advance Height-Adjustable Coilover Kit for 2019 Mazda Mazda3, 2019–2023 Mazda Mazda3 Fastback, 2019 Mazda Mazda3 Sedan — Tein Street Advance Z Damper Kit, Bp#P\/Bpfj3P - GSW02-91AS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eStreet Advance Z is a coilover tuned toward comfort. Height and 16-step damping are both adjustable, but the baseline valving is deliberately softer than Tein's sport kits, so the car stays civil on broken surfaces and long drives. Built for daily use first, with the adjustment there when you want to firm it up.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Mazda3 and Mazda3 Fastback — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Street Advance Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404198850884,"sku":"GSW02-91AS3","price":920.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/GSW02-91AS3.jpg?v=1776621760"},{"product_id":"tein-s-tech-spring-set-bmefs-skmd8-s3b00","title":"Tein S.Tech Lowering Springs SKMD8-S3B00 – Mazda 3 (BM, BMEFS)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2013–2014 Mazda Mazda3 — Tein S.Tech Spring Set, Bmefs - SKMD8-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Mazda3 (BM), 2013–2019, FWD and Mazda Mazda3 (BMEFS), 2014–2018, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFt: cut bump rubber at 30mm from the bottom and use the upper portion. Rr: cut bump rubber at 23mm from the bottom and use the upper portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404209566020,"sku":"SKMD8-S3B00","price":173.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_52b26c96-e4f6-4281-b2f8-81e2558b3535.png?v=1786978236"},{"product_id":"tein-s-tech-spring-set-bk3p-skm66-s3b00","title":"Tein S.Tech Lowering Springs SKM66-S3B00 – Mazda 3 (BK3P)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2004 Mazda Mazda3 — Tein S.Tech Spring Set, Bk3P - SKM66-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Mazda3 (BK3P), 2004–2009, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e5Dr\/4cyl. Ft: cut bump rubber at 20mm from the bottom and use the upper portion. Rr: cut bump rubber at 40mm and 80mm from the top and use the upper and lower portions. The middle part is not needed.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404209959236,"sku":"SKM66-S3B00","price":141.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_1c3f051f-5522-4a9e-8861-82858d153b45.png?v=1786978236"},{"product_id":"tein-s-tech-spring-set-blefw-skm98-s3b00","title":"Tein S.Tech Lowering Springs SKM98-S3B00 – Mazda 3 (BLEFP, BL)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2009–2011 Mazda Mazda3 — Tein S.Tech Spring Set, Blefw - SKM98-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Mazda3 (BLEFP), 2009–2011, FWD and Mazda Mazda3 (BL), 2010–2013, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e4Dr\/4cyl \u0026amp; 5dr\/4cyl\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404210450756,"sku":"SKM98-S3B00","price":157.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_a4e77da6-ed14-4f1a-9285-86c70d37073d.png?v=1786978236"},{"product_id":"tein-s-tech-spring-set-bpfp-skw02-c3b00","title":"Tein S.Tech Lowering Springs SKW02-C3B00 – Mazda 3 (BPFP)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2019 Mazda Mazda3 Fastback — Tein S.Tech Spring Set, Bpfp - SKW02-C3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Mazda3 Fastback (BPFP), 05\/2019–08\/2022, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFt: cut bump rubber at 35mm from the bottom and use the upper portion. Rr: cut bump rubber at 50mm from the bottom and use the upper portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404219199812,"sku":"SKW02-C3B00","price":165.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_b9a8dc63-46a2-4ab3-8132-7ea4283df336.png?v=1786978237"},{"product_id":"tein-s-tech-spring-set-bpfp-skw02-s3b00","title":"Tein S.Tech Lowering Springs SKW02-S3B00 – Mazda 3 (BP\/P)","description":"\u003cp\u003eTein S-Tech Sport Lowering Spring Set for 2019 Mazda Mazda3 — Tein S.Tech Spring Set, Bpfp - SKW02-S3B00.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 springs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Lowering Spring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring Rate:\u003c\/strong\u003e Progressive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop:\u003c\/strong\u003e Approx. 30–50 mm (model-specific)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eS.Tech is Tein's street lowering spring. Progressive rates give a moderate drop — enough to close the arch gap and lower the centre of gravity — without the harshness a short, stiff spring brings. It is designed to work with the car's existing dampers, so it is the cheapest honest route to a better stance and flatter cornering on a daily driver.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Mazda3 (BP-P), from 2019, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne set of four Tein S.Tech springs — both axles, front and rear. Drop is approx. 30–50 mm (model-specific). Dampers, top mounts and spring seats are not included; the springs fit the vehicle's existing hardware.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the springs are fitted to dampers in serviceable condition. Worn dampers let a new spring work outside its intended travel, which shortens its life and is not a manufacturing fault. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eFt: cut bump rubber at 35mm from the bottom and use the upper portion. Rr: cut bump rubber at 50mm from the bottom and use the upper portion.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404219232580,"sku":"SKW02-S3B00","price":165.17,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_6ff41a8e-81f0-44e3-93ba-75361e775b8b.png?v=1786978238"},{"product_id":"tein-endurapro-kit-bm2fs-bmefs-vsma8-a1ds2","title":"Tein Endurapro Shock Absorbers VSMA8-A1DS2 – Mazda Axela, 3","description":"\u003cp\u003eTein EnduraPro OE Replacement Damper Kit for 2013–2016 Mazda Axela Sedan, 2013 Mazda Axela Sedan Hybrid, 2013–2016 Mazda Axela Sport and 1 additional applications — Tein Endurapro Kit, Bm2Fs\/Bmefs - VSMA8-A1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro is Tein's OE-replacement damper with slightly firmer valving than the factory part. Ride height and spring rates stay standard; what changes is body control — less float over undulations and a more settled feel at motorway speed. Damping is fixed, so there is nothing to set up after fitting. The choice when the original dampers are worn and you want a little more than stock.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Axela Sedan, Axela Sport and Mazda3 — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404261536068,"sku":"VSMA8-A1DS2","price":490.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_56a79c5c-0fc5-4813-91f6-7064688cc191.png?v=1781341105"},{"product_id":"tein-flex-z-damper-kit-bm-fs-bm5fp-c-vsma8-c1aa3","title":"Tein Flex Z Shock Absorbers (Damper Kit) VSMA8-C1AA3 – Mazda Axela, 3","description":"\u003cp\u003eTein Flex-Z Height-Adjustable Coilover Kit for 2013 Mazda Axela Sedan, 2013–2016 Mazda Axela Sport, 2014 Mazda Mazda3 — Tein Flex Z Damper Kit, Bm#Fs\/Bm5Fp -C - VSMA8-C1AA3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eFlex Z is Tein's full street coilover: ride height and damping are both adjustable, with 16 damping steps and a wide height range. Height is set on the threaded body independently of spring preload, which is what keeps the ride usable at low settings. Developed for road use, with enough adjustment to change the car's character rather than just its stance.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Axela Sedan (BM5FP), 11\/2013–04\/2019, FWD, Mazda Axela Sport (BMEFS), 11\/2013–07\/2016, FWD and Mazda Mazda3 (BMEFS), 2014–2018, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Flex Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404261568836,"sku":"VSMA8-C1AA3","price":1344.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_6f3de206-8d2a-45d4-89e6-a69fab84ad7e.png?v=1781341105"},{"product_id":"tein-endurapro-kit-bk3p-bkep-vsm24-a1ds2","title":"Tein Endurapro Shock Absorbers VSM24-A1DS2 – Mazda Axela, 3","description":"\u003cp\u003eTein EnduraPro OE Replacement Damper Kit for 2003 Mazda Axela Sedan, 2003 Mazda Axela Sport, 2004 Mazda Mazda3 and 1 additional applications — Tein Endurapro Kit, Bk3P\/Bkep - VSM24-A1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro is Tein's OE-replacement damper with slightly firmer valving than the factory part. Ride height and spring rates stay standard; what changes is body control — less float over undulations and a more settled feel at motorway speed. Damping is fixed, so there is nothing to set up after fitting. The choice when the original dampers are worn and you want a little more than stock.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Axela Sedan (BK3P), 10\/2003–05\/2009, FWD, Mazda Axela Sedan (BK5P), 10\/2003–05\/2009, FWD and Mazda Mazda3 (BK3P), 2004–2009, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404262355268,"sku":"VSM24-A1DS2","price":490.78,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSM24-A1DS2.jpg?v=1776416927"},{"product_id":"tein-endurapro-plus-kit-bk3p-bkep-vsm24-b1ds3","title":"Tein Endurapro Plus Shock Absorbers VSM24-B1DS3 – Mazda Axela, 3","description":"\u003cp\u003eTein EnduraPro Plus Performance Upgrade Damper Kit for 2003 Mazda Axela Sedan, 2003 Mazda Axela Sport, 2004 Mazda Mazda3 and 1 additional applications — Tein Endurapro Plus Kit, Bk3P\/Bkep - VSM24-B1DS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro Plus is the adjustable version of Tein's OE-replacement damper. It keeps standard ride height and springs, but adds a 16-step damping adjuster so ride firmness can be tuned after the car is on the road — softer for poor surfaces, firmer for a loaded car or a quick drive. Useful when you want the option without lowering the car.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Axela Sedan (BK3P), 10\/2003–05\/2009, FWD, Mazda Axela Sedan (BK5P), 10\/2003–05\/2009, FWD and Mazda Mazda3 (BK3P), 2004–2009, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro Plus kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eRr: includes bump rubber, dust boot \u0026amp; upper mount.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404262486340,"sku":"VSM24-B1DS3","price":670.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSM24-B1DS3.jpg?v=1776416927"},{"product_id":"tein-endurapro-kit-blef-blffw-vsm98-a1ds2","title":"Tein Endurapro Shock Absorbers VSM98-A1DS2 – Mazda 3 \/ Ford Focus and more","description":"\u003cp\u003eTein EnduraPro OE Replacement Damper Kit for 2005 Ford Focus, 2009 Mazda Axela Sedan, 2009–2011 Mazda Axela Sport and 4 additional applications — Tein Endurapro Kit, Blef#\/Blffw - VSM98-A1DS2.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro is Tein's OE-replacement damper with slightly firmer valving than the factory part. Ride height and spring rates stay standard; what changes is body control — less float over undulations and a more settled feel at motorway speed. Damping is fixed, so there is nothing to set up after fitting. The choice when the original dampers are worn and you want a little more than stock.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Ford, Mazda and Volvo, including Ford Focus (DA3) and Volvo C30 (533) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404263534916,"sku":"VSM98-A1DS2","price":490.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSM98-A1DS2.jpg?v=1776416919"},{"product_id":"tein-endurapro-plus-kit-blef-blffw-vsm98-b1ds3","title":"Tein Endurapro Plus Shock Absorbers VSM98-B1DS3 – Ford Focus \/ Mazda 3 \/ Mazda Axela","description":"\u003cp\u003eTein EnduraPro Plus Performance Upgrade Damper Kit for 2005 Ford Focus, 2009 Mazda Axela Sedan, 2009–2011 Mazda Axela Sport and 1 additional applications — Tein Endurapro Plus Kit, Blef#\/Blffw - VSM98-B1DS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro Plus is the adjustable version of Tein's OE-replacement damper. It keeps standard ride height and springs, but adds a 16-step damping adjuster so ride firmness can be tuned after the car is on the road — softer for poor surfaces, firmer for a loaded car or a quick drive. Useful when you want the option without lowering the car.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Ford Focus (DA3), 2005–2010, FWD, Mazda Axela Sedan (BLEFP), 06\/2009–09\/2011, FWD and Mazda Mazda3 (BL), 2010–2013, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro Plus kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eRr: includes bump rubber, dust boot \u0026amp; upper mount.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404263567684,"sku":"VSM98-B1DS3","price":670.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/VSM98-B1DS3.jpg?v=1776416918"},{"product_id":"tein-endurapro-plus-kit-bpfp-bp5p-vsw02-b1ds3","title":"Tein Endurapro Plus Shock Absorbers VSW02-B1DS3 – Mazda 3 (BP\/P, BP5P, BPFP, BP5R)","description":"\u003cp\u003eTein EnduraPro Plus Performance Upgrade Damper Kit for 2019 Mazda Mazda3, 2019–2023 Mazda Mazda3 Fastback, 2019 Mazda Mazda3 Sedan — Tein Endurapro Plus Kit, Bpfp\/Bp5P - VSW02-B1DS3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes:\u003c\/strong\u003e Bump rubber \u0026amp; dust boot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eEnduraPro Plus is the adjustable version of Tein's OE-replacement damper. It keeps standard ride height and springs, but adds a 16-step damping adjuster so ride firmness can be tuned after the car is on the road — softer for poor surfaces, firmer for a loaded car or a quick drive. Useful when you want the option without lowering the car.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Mazda3 and Mazda3 Fastback — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein EnduraPro Plus kit — four units, front and rear, for the whole vehicle. Supplied with bump rubber \u0026amp; dust boot. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003e5Dr\/4cylrr: includes bump rubber, dust boot \u0026amp; upper mount.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404274184516,"sku":"VSW02-B1DS3","price":660.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/endurapro_plus_01_c6a3ea4e-5025-46b7-ac40-352f33cb84c3.jpg?v=1779451500"},{"product_id":"tein-flex-z-damper-kit-bp-p-c-vsw02-c1aa3","title":"Tein Flex Z Shock Absorbers (Damper Kit) VSW02-C1AA3 – Mazda 3 (BP\/P, BP5P, BPFP, BPEP)","description":"\u003cp\u003eTein Flex-Z Height-Adjustable Coilover Kit for 2019 Mazda Mazda3, 2019–2023 Mazda Mazda3 Fastback, 2019 Mazda Mazda3 Sedan — Tein Flex Z Damper Kit, Bp#P -C - VSW02-C1AA3.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Front \u0026amp; Rear (complete vehicle set — 4 units)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Coilover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight Adjustment:\u003c\/strong\u003e Yes — vehicle-height adjustable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eFlex Z is Tein's full street coilover: ride height and damping are both adjustable, with 16 damping steps and a wide height range. Height is set on the threaded body independently of spring preload, which is what keeps the ride usable at low settings. Developed for road use, with enough adjustment to change the car's character rather than just its stance.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Mazda Mazda3 and Mazda3 Fastback — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Tein Flex Z kit — four units, front and rear, for the whole vehicle. Threaded bodies and adjustment collars are part of the kit. Springs, top mounts and fixings are not included unless the specification table lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Tein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is installed as a complete set and set up within the ride-height and damping range Tein publishes for it — running a coilover outside its tested height range is the usual reason a claim fails, so keep the setup inside the manual's figures and have the alignment checked afterwards. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cp\u003eRr: use of EDFC series is recommended, as it's difficult to adjust damping force by hand due to vehicle structure.\u003c\/p\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":56404274282820,"sku":"VSW02-C1AA3","price":1344.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/green-shock-absorbers-with-white-background_eab1b8a2-fbbd-4d6f-9338-99f6a6e03221.png?v=1781341106"}],"url":"https:\/\/suspengo.com\/collections\/suspension-mazda-3\/series-s-tech.oembed","provider":"Suspengo","version":"1.0","type":"link"}