{"title":"Škoda Fabia Shock Absorbers \u0026 Suspension","description":"\u003cp\u003eSuspension for the Škoda Fabia across the Mk1 (6Y), Mk2 (5J), Mk3 (NJ) and Mk4 (PJ) generations, including vRS. Everything listed is Bilstein, and this page is kit-led: \u003ca href=\"\/collections\/suspension-skoda-fabia\/series-b12\"\u003eB12\u003c\/a\u003e suspension kits outnumber the individual dampers, with \u003ca href=\"\/collections\/suspension-skoda-fabia\/series-b4\"\u003eB4\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-skoda-fabia\/series-b6\"\u003eB6\u003c\/a\u003e at standard height and \u003ca href=\"\/collections\/suspension-skoda-fabia\/series-b14\"\u003eB14\u003c\/a\u003e coilovers for adjustable ride height.\u003c\/p\u003e\n\u003ch2\u003eWhich variants this covers\u003c\/h2\u003e\n\u003cp\u003eFour generations are listed — 6Y, 5J, NJ and PJ — in hatchback and estate form, including the vRS models. The Fabia shares platforms with other Volkswagen Group small cars, but the chassis codes and part numbers differ, so match the code rather than assuming from a Polo or Ibiza. vRS cars run their own springs and dampers. See also the \u003ca href=\"\/collections\/suspension-skoda-octavia\"\u003eOctavia\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch2\u003eChoosing between the ranges\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/suspension-skoda-fabia\/series-b12\"\u003eBilstein B12\u003c\/a\u003e is the largest group here, which is unusual for a car this size — it supplies shortened dampers with matched lowering springs as one package, so the two are designed to work together rather than assembled by guesswork. If you want the car lower, this is the cleanest route. \u003ca href=\"\/collections\/suspension-skoda-fabia\/series-b4\"\u003eBilstein B4\u003c\/a\u003e is the OE-comparable replacement for a standard car, restoring the factory ride at the original height, and \u003ca href=\"\/collections\/suspension-skoda-fabia\/series-b6\"\u003eBilstein B6\u003c\/a\u003e is the firmer option at that height, which suits a vRS. \u003ca href=\"\/collections\/suspension-skoda-fabia\/series-b8\"\u003eBilstein B8\u003c\/a\u003e is a shortened damper only for cars already lowered by roughly 30–40 mm. \u003ca href=\"\/collections\/suspension-skoda-fabia\/series-b14\"\u003eBilstein B14\u003c\/a\u003e coilovers let you set ride height directly. No Tein ranges are stocked for the Fabia.\u003c\/p\u003e\n\u003ch2\u003eWhat to check before ordering\u003c\/h2\u003e\n\u003cp\u003eFront and rear are separate listings; fit in axle pairs and align the car afterwards. Strut support bearings and \u003ca href=\"\/collections\/suspension-skoda-fabia\/series-b1\"\u003eprotection kits\u003c\/a\u003e are worth renewing with any damper — on a small car used mostly in town they wear faster than the damper does. The Fabia caveat is the rear: these cars use a torsion-beam rear axle whose dampers are specific to the generation, and the 6Y and 5J rear parts are not interchangeable.\u003c\/p\u003e\n\u003ch2\u003eCommon questions for this chassis\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs Tein available for the Fabia?\u003c\/strong\u003e Not currently — this page is Bilstein only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill Polo parts fit?\u003c\/strong\u003e Not reliably. Related platforms, different part numbers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are there more kits than dampers?\u003c\/strong\u003e B12 coverage for the Fabia is simply deeper than the individual damper ranges.\u003c\/p\u003e","products":[{"product_id":"bilstein-shock-absorber-19-109572","title":"Bilstein B4 Shock Absorbers 19-109572 – Audi A1 \/ Seat Cordoba \/ Škoda Fabia","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-109572\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 1 (6Y2), 08\/1999–03\/2008, FWD, SEAT Cordoba (6L2), 09\/2002–11\/2009, FWD and Audi A1 (8X1, 8XK), 05\/2010–09\/2019, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 6Q0 513 025 M, 6Q0 513 025 R, 6Q0 513 025 AA, 6R0 513 025 E, 6C0 513 025 AT.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615447822660,"sku":"19-109572","price":39.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-109572_1.jpg?v=1776084926"},{"product_id":"bilstein-shock-absorber-19-109589","title":"Bilstein B4 Shock Absorbers 19-109589 – Škoda Fabia (6Y5, 545)","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-109589\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 1 Combi (6Y5), 04\/2000–12\/2007, FWD and Škoda Fabia 2 Combi (545), 10\/2007–12\/2014, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 6Q0 513 025 AJ, 6Q0 513 025 AH, 6Q0 513 025 P, 6Q0 513 025 AR, 6Q0 513 025 BN.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615447855428,"sku":"19-109589","price":42.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-109589_1.jpg?v=1779439508"},{"product_id":"bilstein-shock-absorber-19-196312","title":"Bilstein B4 Shock Absorbers 19-196312 – Škoda Fabia I (6Y2, 6Y5)","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 19-196312\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 1 (6Y2), 08\/1999–03\/2008, FWD and Škoda Fabia 1 Combi (6Y5), 04\/2000–12\/2007, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 6Q0 513 025 AD, 6R0 513 025 A, 6R0 513 025 H, 6R0 513 025 J, 6R0 513 025 P.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615486816580,"sku":"19-196312","price":48.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-196312_1.jpg?v=1779439860"},{"product_id":"bilstein-shock-absorber-19-198415","title":"Bilstein B4 Shock Absorbers 19-198415 – Audi A1 Allstreet \/ Seat Ibiza and more","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 19-198415\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Audi, SEAT, VW and Škoda, including SEAT Ibiza 5 (KJ1, KJG) and Škoda Fabia 4 (PJ3) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 2Q0 513 049 CD, 2Q0513049-CA, 2Q0513049-DD, 2Q0 513 049 AL, 2Q0513049-DE.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615488684356,"sku":"19-198415","price":49.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-198415_1.jpg?v=1779439863"},{"product_id":"bilstein-shock-absorber-19-262147","title":"Bilstein B4 Shock Absorbers 19-262147 – Škoda Fabia III (NJ3)","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 19-262147\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 3 (NJ3), 08\/2014–06\/2021, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 6Q0 513 025 AA, 6Q0 513 025 AA, 6Q0 513 025 M, 6Q0 513 025 P, 6C0 513 025 AL.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615517225284,"sku":"19-262147","price":49.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-262147_1.jpg?v=1779441282"},{"product_id":"bilstein-shock-absorber-19-283524","title":"Bilstein B4 Shock Absorbers 19-283524 – Škoda Fabia III (NJ3)","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 19-283524\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 3 (NJ3), 08\/2014–06\/2021, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1C9 512 011, 1J0 513 025 BF, 1J0 513 025 BN, 1J0 513 025 BP, 1J0 513 025 C.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615547240772,"sku":"19-283524","price":64.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-283524_1.jpg?v=1779441298"},{"product_id":"bilstein-shock-absorber-22-105813","title":"Bilstein B4 Shock Absorbers 22-105813 – Škoda Fabia \/ VW Polo and more","description":"\u003cp\u003eBilstein B4 OEM Replacement Front (universal) shock absorber — Bilstein Shock Absorber 22-105813\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 13 models from Audi, SEAT, VW and Škoda, including Škoda Fabia 1 (6Y2) and Škoda Fabia 1 Saloon (6Y3) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 6Q0 413 031 BH, 6Q0 413 031 BM, 6Q0 413 031 BN, 5Z0 413 031 AB, 6Q0 413 031 AH.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615578763588,"sku":"22-105813","price":59.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-105813_1.jpg?v=1776084800"},{"product_id":"bilstein-shock-absorber-22-183705","title":"Bilstein B4 Shock Absorbers 22-183705 – Seat Ibiza \/ Audi A1 and more","description":"\u003cp\u003eBilstein Front (universal) shock absorber — Bilstein Shock Absorber 22-183705\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 12 models from Audi, SEAT, VW and Škoda, including SEAT Ibiza 4 (6J5, 6P1) and SEAT Ibiza 4 Sc (6J1, 6P5) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 6R0413031Q, 6R0413031S, 6R0 413 031 G, 6RF 413 031 G, 6C0 413 031 AJ.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615589708100,"sku":"22-183705","price":64.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-183705_1.jpg?v=1779441365"},{"product_id":"bilstein-shock-absorber-22-196309","title":"Bilstein B4 Shock Absorbers 22-196309 – Škoda Fabia \/ Audi A2","description":"\u003cp\u003eBilstein Front (universal) shock absorber — Bilstein Shock Absorber 22-196309\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 1 (6Y2), 08\/1999–03\/2008, FWD, Audi A2 (8Z0), 02\/2000–08\/2005, FWD and Škoda Fabia 1 Combi (6Y5), 04\/2000–12\/2007, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 6Q0 413 031 BJ, 6Q0 413 031 BQ, 6Q0 413 031 BR, 6Q0 413 031 CF, 6Q0 413 031 AP.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615593083204,"sku":"22-196309","price":63.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-196309_1.jpg?v=1779441370"},{"product_id":"bilstein-shock-absorber-24-067898","title":"Bilstein B6 Shock Absorbers 24-067898 – Škoda Fabia \/ Audi A1 and more","description":"\u003cp\u003eBilstein B6 Sport Rear (universal) shock absorber — Bilstein Shock Absorber 24-067898\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 Sport is the sport-tuned damper for standard ride height, sold under Bilstein's earlier B6 naming. Firmer rebound control than the OE part means less float over crests and tighter body movement through quick direction changes, while ride height and spring rates stay untouched. Suited to spirited road driving on a car you do not want to lower. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from Audi, SEAT, VW and Škoda, including Škoda Fabia 1 (6Y2) and Audi A2 (8Z0) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 Sport damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615785595204,"sku":"24-067898","price":114.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-067898_1.jpg?v=1779441493"},{"product_id":"bilstein-shock-absorber-24-067904","title":"Bilstein B8 Shock Absorbers 24-067904 – Škoda Fabia \/ Audi A1 and more","description":"\u003cp\u003eBilstein B8 Sprint Rear (universal) shock absorber — Bilstein Shock Absorber 24-067904\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is monotube: gas and oil are separated by a floating piston, which keeps damping consistent when the damper is worked hard and heat builds.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from Audi, SEAT, VW and Škoda, including Škoda Fabia 1 (6Y2) and Audi A2 (8Z0) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615785627972,"sku":"24-067904","price":120.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-067904_1.jpg?v=1779441493"},{"product_id":"bilstein-shock-absorber-24-257329","title":"Bilstein B6 Shock Absorbers 24-257329 – Škoda Fabia III (NJ3)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Škoda Fabia 3 (NJ3) — Bilstein Shock Absorber 24-257329.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 3 (NJ3), 08\/2014–06\/2021, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615818723652,"sku":"24-257329","price":122.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-257329_1.jpg?v=1779441514"},{"product_id":"bilstein-shock-absorber-35-052173","title":"Bilstein B6 Shock Absorbers 35-052173 – Škoda Fabia \/ Audi A2 and more","description":"\u003cp\u003eBilstein B6 Sport Front (universal) shock absorber — Bilstein Shock Absorber 35-052173\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 Sport is the sport-tuned damper for standard ride height, sold under Bilstein's earlier B6 naming. Firmer rebound control than the OE part means less float over crests and tighter body movement through quick direction changes, while ride height and spring rates stay untouched. Suited to spirited road driving on a car you do not want to lower. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from Audi, SEAT, VW and Škoda, including Škoda Fabia 1 (6Y2) and Audi A2 (8Z0) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 Sport damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615839170884,"sku":"35-052173","price":183.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-052173_1.jpg?v=1779441546"},{"product_id":"bilstein-shock-absorber-35-052180","title":"Bilstein B8 Shock Absorbers 35-052180 – Škoda Fabia \/ Audi A2 and more","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 35-052180\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from Audi, SEAT, VW and Škoda, including Škoda Fabia 1 (6Y2) and Audi A2 (8Z0) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615839203652,"sku":"35-052180","price":184.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-052180_1.jpg?v=1776083783"},{"product_id":"bilstein-shock-absorber-35-257318","title":"Bilstein B6 Shock Absorbers 35-257318 – Škoda Fabia III (NJ3)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Škoda Fabia 3 (NJ3) — Bilstein Shock Absorber 35-257318.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 3 (NJ3), 08\/2014–06\/2021, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615850541380,"sku":"35-257318","price":202.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-257318_1.jpg?v=1779441566"},{"product_id":"bilstein-shock-absorber-35-257349","title":"Bilstein B8 Shock Absorbers 35-257349 – Škoda Fabia III (NJ3)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the Škoda Fabia 3 (NJ3) — Bilstein Shock Absorber 35-257349.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 3 (NJ3), 08\/2014–06\/2021, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615850639684,"sku":"35-257349","price":210.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-257349_1.jpg?v=1779441567"},{"product_id":"bilstein-suspension-set-46-182609","title":"Bilstein B12 Suspension Set 46-182609 – Škoda Fabia I (6Y3, 6Y5)","description":"\u003cp\u003eBilstein B12 Suspension set for FABIA I sedan (6Y3) — Bilstein Suspension set 46-182609.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 1 Saloon (6Y3), 10\/1999–12\/2007, FWD and Škoda Fabia 1 Combi (6Y5), 04\/2000–12\/2007, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615870529860,"sku":"46-182609","price":1030.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_423b5de6-0a35-481b-96cc-3f81ef37a6af.jpg?v=1786966663"},{"product_id":"bilstein-suspension-set-46-182616","title":"Bilstein B12 Suspension Set 46-182616 – Škoda Fabia I (6Y3, 6Y5)","description":"\u003cp\u003eBilstein B12 Suspension set for FABIA I sedan (6Y3) — Bilstein Suspension set 46-182616.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 1 Saloon (6Y3), 10\/1999–12\/2007, FWD and Škoda Fabia 1 Combi (6Y5), 04\/2000–12\/2007, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615870562628,"sku":"46-182616","price":1050.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_5ec9807b-6432-4c1b-8afd-912453f0f4e2.jpg?v=1786966663"},{"product_id":"bilstein-suspension-set-46-182623","title":"Bilstein B12 Suspension Set 46-182623 – Škoda Fabia I (6Y2)","description":"\u003cp\u003eBilstein B12 Suspension set for the Škoda Fabia 1 (6Y2) — Bilstein Suspension set 46-182623.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 1 (6Y2), 08\/1999–03\/2008, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615870595396,"sku":"46-182623","price":1050.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_d4c1e406-f55e-4dce-8e66-c059569d8302.jpg?v=1786966666"},{"product_id":"bilstein-suspension-set-46-182647","title":"Bilstein B12 Suspension Set 46-182647 – Škoda Fabia I (6Y2)","description":"\u003cp\u003eBilstein B12 Suspension set for the Škoda Fabia 1 (6Y2) — Bilstein Suspension set 46-182647.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 1 (6Y2), 08\/1999–03\/2008, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615870628164,"sku":"46-182647","price":1063.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_75a05b7a-333e-48e3-ae40-79f6233545b2.jpg?v=1786966665"},{"product_id":"bilstein-suspension-set-46-182678","title":"Bilstein B12 Suspension Set 46-182678 – Škoda Fabia II (542)","description":"\u003cp\u003eBilstein B12 Suspension set for the Škoda Fabia 2 (542) — Bilstein Suspension set 46-182678.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.80 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 2 (542), 12\/2006–12\/2014, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615870726468,"sku":"46-182678","price":1021.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_ce2fdf81-70aa-4ea9-8fcc-e5a2f2d5646f.jpg?v=1786966665"},{"product_id":"bilstein-suspension-set-46-182692","title":"Bilstein B12 Suspension Set 46-182692 – Škoda Fabia II (542)","description":"\u003cp\u003eBilstein B12 Suspension set for the Škoda Fabia 2 (542) — Bilstein Suspension set 46-182692.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 2 (542), 12\/2006–12\/2014, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615870792004,"sku":"46-182692","price":1021.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_00e92d00-8ded-4efd-9030-3df076dedc23.jpg?v=1786966666"},{"product_id":"bilstein-suspension-set-46-182708","title":"Bilstein B12 Suspension Set 46-182708 – Škoda Fabia II (545)","description":"\u003cp\u003eBilstein B12 Suspension set for the Škoda Fabia 2 Combi (545) — Bilstein Suspension set 46-182708.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 2 Combi (545), 10\/2007–12\/2014, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615870824772,"sku":"46-182708","price":1021.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_97df3d69-d516-49bd-be41-b55af36d8788.jpg?v=1786966665"},{"product_id":"bilstein-suspension-set-46-182715","title":"Bilstein B12 Suspension Set 46-182715 – Škoda Fabia II (545)","description":"\u003cp\u003eBilstein B12 Suspension set for the Škoda Fabia 2 Combi (545) — Bilstein Suspension set 46-182715.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 2 Combi (545), 10\/2007–12\/2014, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615870857540,"sku":"46-182715","price":1021.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/46-182715_1.jpg?v=1779109102"},{"product_id":"bilstein-suspension-set-46-333841","title":"Bilstein B12 Suspension Set 46-333841 – Audi A1 \/ Seat Ibiza and more","description":"\u003cp\u003eBilstein B12 Suspension set for 4 models from Audi, SEAT, VW and 1 other make — Bilstein Suspension set 46-333841.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.61 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Audi, SEAT, VW and Škoda, including SEAT Ibiza 5 (KJ1, KJG) and VW Polo 6 (AW1, BZ1, AE1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615922663748,"sku":"46-333841","price":965.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_a252f12d-50ef-44ae-920d-b0056b74f9f5.jpg?v=1786966683"},{"product_id":"bilstein-suspension-set-46-333858","title":"Bilstein B12 Suspension Set 46-333858 – Audi A1 \/ Seat Ibiza and more","description":"\u003cp\u003eBilstein B12 Suspension set for A1 Sportback (GBA) — Bilstein Suspension set 46-333858.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.63 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Audi, SEAT, VW and Škoda, including SEAT Ibiza 5 (KJ1, KJG) and VW Polo 6 (AW1, BZ1, AE1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615923024196,"sku":"46-333858","price":965.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_f5b98356-997e-4924-8984-5f4d83ea1c0e.jpg?v=1786966683"},{"product_id":"bilstein-suspension-set-46-339904","title":"Bilstein B12 Suspension Set 46-339904 – Škoda Fabia III (NJ3)","description":"\u003cp\u003eBilstein B12 Suspension set for FABIA III (NJ3), 08 — Bilstein Suspension set 46-339904.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18.89 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 3 (NJ3), 08\/2014–06\/2021, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615932002628,"sku":"46-339904","price":1008.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/46-339904_1.jpg?v=1779109641"},{"product_id":"bilstein-suspension-set-46-339911","title":"Bilstein B12 Suspension Set 46-339911 – Škoda Fabia III (NJ3)","description":"\u003cp\u003eBilstein B12 Suspension set for FABIA III (NJ3), 08 — Bilstein Suspension set 46-339911.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.41 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 3 (NJ3), 08\/2014–06\/2021, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615932035396,"sku":"46-339911","price":1008.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/46-339911_1.jpg?v=1779109642"},{"product_id":"bilstein-suspension-set-46-339928","title":"Bilstein B12 Suspension Set 46-339928 – Škoda Fabia III (NJ3)","description":"\u003cp\u003eBilstein B12 Suspension set for the Škoda Fabia 3 (NJ3) — Bilstein Suspension set 46-339928.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 19.67 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 3 (NJ3), 08\/2014–06\/2021, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615932068164,"sku":"46-339928","price":1029.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_771df9bd-f285-47be-aadf-7bd1fa1e883c.jpg?v=1786966689"},{"product_id":"bilstein-suspension-set-46-339935","title":"Bilstein B12 Suspension Set 46-339935 – Škoda Fabia III (NJ3)","description":"\u003cp\u003eBilstein B12 Suspension set for the Škoda Fabia 3 (NJ3) — Bilstein Suspension set 46-339935.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20.19 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Škoda Fabia 3 (NJ3), 08\/2014–06\/2021, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615932100932,"sku":"46-339935","price":1020.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/B12_Pro-Kit_50c924c7-e923-4bf2-b494-d0a00c3b8f1f.jpg?v=1786966690"},{"product_id":"bilstein-suspension-set-47-146914","title":"Bilstein B14 Suspension Set 47-146914 – Škoda Fabia \/ VW Polo and more","description":"\u003cp\u003eBilstein B14 Suspension set for POLO IV (9N_, 9A_) — Bilstein Suspension set 47-146914.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.15 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB14 is a height-adjustable coilover. Threaded damper bodies let you set ride height anywhere inside a tested range, so you dial in the stance rather than accept whatever a fixed spring gives you. Damping is factory-set and firm, tuned for predictable road behaviour. It is the step up from a spring-and-damper kit when you want control over how low the car actually sits.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from SEAT, VW and Škoda, including Škoda Fabia 1 (6Y2) and Škoda Fabia 1 Saloon (6Y3) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B14 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615936950596,"sku":"47-146914","price":1463.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/47-146914_1.jpg?v=1776083497"},{"product_id":"bilstein-shock-absorber-protection-kit-11-101321","title":"Bilstein B1 Shock Absorber Protection Kit 11-101321 – Škoda Fabia \/ VW Polo and more","description":"\u003cp\u003eBilstein B1 Shock absorber protection kit for BMW 3(E30) — Bilstein Shock absorber protection kit 11-101321.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 957\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.34 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 17 models from Audi, BMW, Fiat, SEAT, VW and Škoda, including BMW 2 5 3 2 Coupe (E9) and BMW 2500 3 3 (E3) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1 137 932, 31 30 6 757 046, 31 33 0 146 239, 31 33 1 094 749, 31 33 1 094 750, 31 33 1 094 751, 31 33 1 124 449, 31 33 1 125 215, 31 33 1 134 314, 31 33 1 137 932, 31 33 1 140 140, 31 33 6 750 892, 31 33 6 752 832, 31 33 6 767 320, 31 33 6 768 208, 31 33 6 771 352, 31 33 6 771 380, 31 33 6 773 619, 31 33 6 778 544, 4409263, 6N0412303A, 6N0413175A, 6Q0412301A\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne protection kit for a single damper — bump stop and dust cover. It covers one corner, so order two per axle. The damper itself is not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. These are wear parts: cover is against manufacturing defects, not against the wear they are fitted to absorb. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618229039428,"sku":"11-101321","price":24.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/11-101321.jpg?v=1778825703"},{"product_id":"bilstein-shock-absorber-protection-kit-11-106470","title":"Bilstein B1 Shock Absorber Protection Kit 11-106470 – Škoda Fabia \/ Seat Ibiza and more","description":"\u003cp\u003eBilstein B1 Shock absorber protection kit for VW POLO — Bilstein Shock absorber protection kit 11-106470.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 957\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.30 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 16 models from SEAT, VW and Škoda, including VW Polo 3 Classic (6V2) and Škoda Fabia 1 (6Y2) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne protection kit for a single damper — bump stop and dust cover. It covers one corner, so order two per axle. The damper itself is not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. These are wear parts: cover is against manufacturing defects, not against the wear they are fitted to absorb. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618229432644,"sku":"11-106470","price":24.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/11-106470.jpg?v=1778825740"},{"product_id":"bilstein-shock-absorber-protection-kit-11-115755","title":"Bilstein B1 Shock Absorber Protection Kit 11-115755 – VW Golf \/ Ford Fiesta and more","description":"\u003cp\u003eBilstein B1 Shock absorber protection kit for GOLF IV — Bilstein Shock absorber protection kit 11-115755.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 957\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.36 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 24 models from Audi, Ford, Mazda, SEAT, VW and Škoda, including SEAT Toledo 2 (1M) and VW New Beetle (9C1, 1C1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1J0512131B, 1J0513425A, 6Q0 512 131B\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne protection kit for a single damper — bump stop and dust cover. It covers one corner, so order two per axle. The damper itself is not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. These are wear parts: cover is against manufacturing defects, not against the wear they are fitted to absorb. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618229498180,"sku":"11-115755","price":21.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/11-101307_db9b2d6e-453c-4986-804b-ac35efc0f3be.jpg?v=1781430233"},{"product_id":"bilstein-suspension-strut-support-bearing-12-244911","title":"Bilstein B1 Strut Support Bearing 12-244911 – Seat Ibiza \/ Škoda Fabia and more","description":"\u003cp\u003eBilstein B1 Suspension strut support bearing for FABIA III (NJ3), 08 — Bilstein Suspension strut support bearing 12-244911.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 952\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.36 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 22 models from Audi, SEAT, VW and Škoda, including SEAT Toledo 2 (1M) and VW New Beetle (9C1, 1C1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1J0 412 249, 1J0 412 331 BS, 1J0 412 331 C, 1J0 412 331 C S1, 1J0 412 331 CS, 6R0 412 249, 1J0412331C\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B1 strut support bearing — a single corner. Order two to do an axle. The strut, spring and top nut are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the bearing is fitted with the top nut torqued to specification and the strut re-assembled correctly. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618291036484,"sku":"12-244911","price":17.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/bilstein-strut-support-bearing_127.jpg?v=1786996890"},{"product_id":"bilstein-suspension-strut-support-bearing-12-244928","title":"Bilstein B1 Strut Support Bearing 12-244928 – Škoda Fabia \/ VW Polo and more","description":"\u003cp\u003eBilstein B1 Suspension strut support bearing for OCTAVIA I (1U2), 09 — Bilstein Suspension strut support bearing 12-244928.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 952\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.42 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 10 models from VW and Škoda, including VW New Beetle (9C1, 1C1) and Škoda Fabia 1 (6Y2) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1J0 513 353 B\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B1 strut support bearing — a single corner. Order two to do an axle. The strut, spring and top nut are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the bearing is fitted with the top nut torqued to specification and the strut re-assembled correctly. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618291069252,"sku":"12-244928","price":18.1,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/bilstein-strut-support-bearing_128.jpg?v=1786996893"},{"product_id":"e10-79-011-02-22","title":"Eibach Pro-Kit Lowering Springs E10-79-011-02-22 – Škoda Fabia III (NJ5)","description":"\u003cp\u003eEibach Pro-Kit lowering springs E10-79-011-02-22 for the Skoda Fabia III Estate \/ Station Wagon (NJ5, NJ5), lowering the car by 30 mm at the front and 35 mm at the rear, approved to 960 kg front and 840 kg rear axle load.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E10-79-011-02-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 35 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 960 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 840 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e 2 × front axle spring F11-81-010-05-VA, 2 × rear axle spring F11-85-008-01-HA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E1081010.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e M1085024.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 1 vehicle, 1 fitment row\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003ePro-Kit is Eibach's progressive-rate lowering spring set. It drops the car by 30 mm at the front and 35 mm at the rear on the standard dampers, so the centre of gravity falls and body roll through a corner is reduced without turning the ride harsh. The progressive rate stays compliant over small bumps and firms up as the spring compresses, which is what keeps the car usable on poor roads while still feeling tied down at speed.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Skoda Fabia III Estate \/ Station Wagon (NJ5, NJ5), from 10\/2014, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-skoda-fabia\"\u003eŠkoda Fabia\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Pro-Kit spring set for this vehicle — springs for both axles, supplied together as a matched front-and-rear set (2 × front axle spring F11-81-010-05-VA · 2 × rear axle spring F11-85-008-01-HA). Dampers, top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411432481092,"sku":"E10-79-011-02-22","price":175.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-pro-kit-performance-lowering-springs-clean.jpg?v=1791831021"},{"product_id":"psm69-15-014-01-22","title":"Eibach Pro-Street-Multi Coilover Kit PSM69-15-014-01-22 – Seat Ibiza \/ Audi A1 and more","description":"\u003cp\u003eEibach Pro-Street-Multi coilover kit PSM69-15-014-01-22 for the Seat Ibiza IV Sportcoupe (6J1, 6P5), a 10–60 mm at the front and 15–60 mm at the rear change in ride height, approved to 1000 kg front and 880 kg rear axle load, covering 8 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Pro-Street-Multi\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PSM69-15-014-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 10–60 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 15–60 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 TFSI, 1.2 TFSI, 1.4 TDI, 1.4 TFSI, 1.4 TSI, 1.6 TDI, 1.8 TFSI, 2.0 TDI, 1.2, 1.4, 1…:\u003c\/strong\u003e 35–60 mm front \/ 35–60 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.4 TSI Cupra:\u003c\/strong\u003e 30–55 mm front \/ 30–55 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.8 TSI Cupra:\u003c\/strong\u003e 25–50 mm front \/ 20–45 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.4 TSI R5:\u003c\/strong\u003e 20–45 mm front \/ 30–55 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.4 GTI:\u003c\/strong\u003e 20–45 mm front \/ 20–45 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.0 R WRC:\u003c\/strong\u003e 10–35 mm front \/ 15–40 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 1000 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 880 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e F68-15-014-01-FA, F68-15-014-01-RA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamper part numbers:\u003c\/strong\u003e 2 × front damper PSM64-15-014-01-FA, 2 × rear damper PSM64-15-014-01-RA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E6915014.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e M6915014.pdf, Entsorgungsanleitung.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 8 vehicles, 13 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003ePro-Street-Multi is the adjustable-damping coilover in the Pro-Street range. Ride height moves across 10–60 mm at the front and 15–60 mm at the rear on the spring seat and damping force is adjustable separately, so compression and rebound can be dialled in after the car is on the road rather than fixed at the factory.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Audi A1 (8X1, 8XK), 05\/2010–10\/2018, FWD; Audi A1 Sportback (8XA, 8XF), 09\/2011–10\/2018, FWD; Seat Ibiza IV (6J5, 6P1), 03\/2008–06\/2017, FWD; Seat Ibiza IV Sportcoupe (6J1, 6P5), 06\/2008–12\/2016, FWD; Seat Ibiza IV ST (6J8, 6P8), 03\/2010–07\/2016, FWD; Skoda Fabia III (NJ3), from 08\/2014, FWD; Skoda Fabia III Estate \/ Station Wagon (NJ5, NJ5), from 10\/2014, FWD; and Volkswagen Polo (6R1, 6C1), from 03\/2009, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eThe full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Pro-Street-Multi coilover set for this vehicle — adjustable strut assemblies and their matched springs for both axles, supplied together. Struts: 2 × front damper PSM64-15-014-01-FA · 2 × rear damper PSM64-15-014-01-RA. Springs: F68-15-014-01-FA · F68-15-014-01-RA. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eFront axle height adjustable by threaded strut, rear axle by height adjustable unit.\u003c\/li\u003e\n  \u003cli\u003eIn some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.\u003c\/li\u003e\n  \u003cli\u003eOnce the suspension kit is installed the electronic damper control will not be available anymore. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eIf replacement required: Please contact your dealer. - Please have your car documents, part numbers and sales receipt ready to give detailed information.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411444212036,"sku":"PSM69-15-014-01-22","price":2840.21,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-pro-street-multi-coilover-kit-clean.jpg?v=1791831021"},{"product_id":"e20-81-016-01-22","title":"Eibach Sportline Lowering Springs E20-81-016-01-22 – Seat Ibiza \/ VW Polo \/ Škoda Fabia","description":"\u003cp\u003eEibach Sportline lowering springs E20-81-016-01-22 for the Seat Ibiza V (KJ1), lowering the car by 35–45 mm at the front and 30–40 mm at the rear, approved to 880 kg front and 870 kg rear axle load, covering 3 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Sportline\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E20-81-016-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 35–45 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 30–40 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0, 1.0 MPi, 1.0 TSI, 1.6:\u003c\/strong\u003e 35–40 mm front \/ 40 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 MPI, 1.6:\u003c\/strong\u003e 45 mm front \/ 35–40 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0, 1.0 TSI:\u003c\/strong\u003e 35–45 mm front \/ 30–35 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e up to 880 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e up to 870 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e F21-81-016-01-FA, F21-81-016-01-RA, M45-85-014-01-01\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E2081016.pdf, E1081016S.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 3 vehicles, 3 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eSportline is the deep-drop member of the Eibach spring range — 35–45 mm at the front and 30–40 mm at the rear, noticeably lower than Pro-Kit, for the look and the lowest practical centre of gravity. Spring rates rise accordingly, so the car is firmer and wheel travel is shorter. Eibach recommends pairing Sportline springs with sports dampers; standard dampers that are already worn will not control these rates.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Seat Ibiza V (KJ1), from 01\/2017, FWD; Skoda Fabia IV (PJ3), from 06\/2021, FWD; and Volkswagen Polo (AW1, BZ1), from 06\/2017, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eThe full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Sportline spring set for this vehicle — springs for both axles, supplied together as a matched front-and-rear set (F21-81-016-01-FA · F21-81-016-01-RA · M45-85-014-01-01). Dampers, top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411449258308,"sku":"E20-81-016-01-22","price":183.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-sportline-lowering-springs-clean.jpg?v=1791831021"},{"product_id":"e90-81-016-01-22","title":"Eibach B12 Pro-Kit Suspension Kit E90-81-016-01-22 – Seat Ibiza \/ VW Polo \/ Škoda Fabia","description":"\u003cp\u003eEibach B12 Pro-Kit suspension kit E90-81-016-01-22 for the Seat Ibiza V (KJ1), lowering the car by 25–35 mm at the front and 25–30 mm at the rear, approved to 880 kg front and 870 kg rear axle load, covering 3 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e B12 Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E90-81-016-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 25–35 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 25–30 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0, 1.0 MPi, 1.0 TSI:\u003c\/strong\u003e 25–30 mm front \/ 30 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 MPI:\u003c\/strong\u003e 35 mm front \/ 30 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0, 1.0 TSI:\u003c\/strong\u003e 25–30 mm front \/ 25 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e up to 880 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 870 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e F11-81-016-01-FA, F11-81-016-01-RA, M45-85-014-01-01\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamper part numbers:\u003c\/strong\u003e 2 × front damper 22-313669, 2 × rear damper 24-313674\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e ABE15021.pdf, E1081016.pdf, E1081016S.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e Entsorgungsanleitung.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 3 vehicles, 3 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 Pro-Kit is a complete matched suspension set: Eibach Pro-Kit progressive springs supplied together with dampers valved for exactly those rates. The car sits 25–35 mm at the front and 25–30 mm at the rear lower, and because the damping and the spring rates were developed as a pair, the body is controlled on rebound as well as compression — the part a spring-only lowering leaves to a damper that was never tuned for it.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Seat Ibiza V (KJ1), from 01\/2017, FWD; Skoda Fabia IV (PJ3), from 06\/2021, FWD; and Volkswagen Polo (AW1, BZ1), from 06\/2017, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eThe full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach B12 Pro-Kit for this vehicle — matched springs and dampers for both axles, supplied together so the spring rates and the damping are the pair they were developed as. Springs: F11-81-016-01-FA · F11-81-016-01-RA · M45-85-014-01-01. Dampers: 2 × front damper 22-313669 · 2 × rear damper 24-313674. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eExcept electronic suspension systems.\u003c\/li\u003e\n  \u003cli\u003eDue to the usage of gas pressure technology of the B6 \/ B8 dampers the dimension of lowering \/ lifting may vary slightly vehicle-specifically. Functionality of electronic dampers is not applicable . - If available, we recommend to use Pro-Tronic.\u003c\/li\u003e\n  \u003cli\u003eIf replacement required: Please contact your dealer. - Please have your car documents, part numbers and sales receipt ready to give detailed information.\u003c\/li\u003e\n  \u003cli\u003eFor cars with rear live axle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411451453764,"sku":"E90-81-016-01-22","price":873.96,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-b12-pro-kit-springs-and-dampers-clean.jpg?v=1791831021"},{"product_id":"e20-81-016-02-22","title":"Eibach Sportline Lowering Springs E20-81-016-02-22 – Seat Ibiza \/ VW Polo \/ Škoda Fabia","description":"\u003cp\u003eEibach Sportline lowering springs E20-81-016-02-22 for the Seat Ibiza V (KJ1), lowering the car by 35–50 mm at the front and 30–40 mm at the rear, approved to 935 kg front and 870 kg rear axle load, covering 3 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Sportline\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E20-81-016-02-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 35–50 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 30–40 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 TSI, 1.5 TSI, 1.6:\u003c\/strong\u003e 35–40 mm front \/ 40 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 TSI, 1.6:\u003c\/strong\u003e 45–50 mm front \/ 35–40 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 TSI:\u003c\/strong\u003e 35–45 mm front \/ 30–35 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e up to 935 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e up to 870 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e 2 × front axle spring F21-15-021-01-VA, F21-81-016-01-RA, M45-85-014-01-01\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E2081016.pdf, E1081016S.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 3 vehicles, 3 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eSportline is the deep-drop member of the Eibach spring range — 35–50 mm at the front and 30–40 mm at the rear, noticeably lower than Pro-Kit, for the look and the lowest practical centre of gravity. Spring rates rise accordingly, so the car is firmer and wheel travel is shorter. Eibach recommends pairing Sportline springs with sports dampers; standard dampers that are already worn will not control these rates.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Seat Ibiza V (KJ1), from 01\/2017, FWD; Skoda Fabia IV (PJ3), from 06\/2021, FWD; and Volkswagen Polo (AW1, BZ1), from 06\/2017, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eThe full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Sportline spring set for this vehicle — springs for both axles, supplied together as a matched front-and-rear set (2 × front axle spring F21-15-021-01-VA · F21-81-016-01-RA · M45-85-014-01-01). Dampers, top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411451322692,"sku":"E20-81-016-02-22","price":183.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-sportline-lowering-springs-clean.jpg?v=1791831021"},{"product_id":"e20-81-016-03-22","title":"Eibach Sportline Lowering Springs E20-81-016-03-22 – Seat Ibiza \/ VW Polo \/ Škoda Fabia","description":"\u003cp\u003eEibach Sportline lowering springs E20-81-016-03-22 for the Seat Ibiza V (KJ1), lowering the car by 35–50 mm at the front and 30–40 mm at the rear, approved to 1010 kg front and 870 kg rear axle load, covering 3 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Sportline\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E20-81-016-03-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 35–50 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 30–40 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.6 TDI:\u003c\/strong\u003e 35–40 mm front \/ 40 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 TSI, 1.5 TSI:\u003c\/strong\u003e 45–50 mm front \/ 35–40 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.5 TSI, 1.6 TDI:\u003c\/strong\u003e 35–45 mm front \/ 30–35 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e up to 1010 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e up to 870 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e 2 × front axle spring F21-15-021-02-VA, F21-81-016-01-RA, M45-85-014-01-01\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E2081016.pdf, E1081016S.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 3 vehicles, 3 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eSportline is the deep-drop member of the Eibach spring range — 35–50 mm at the front and 30–40 mm at the rear, noticeably lower than Pro-Kit, for the look and the lowest practical centre of gravity. Spring rates rise accordingly, so the car is firmer and wheel travel is shorter. Eibach recommends pairing Sportline springs with sports dampers; standard dampers that are already worn will not control these rates.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Seat Ibiza V (KJ1), from 01\/2017, FWD; Skoda Fabia IV (PJ3), from 06\/2021, FWD; and Volkswagen Polo (AW1, BZ1), from 11\/2017, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eThe full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Sportline spring set for this vehicle — springs for both axles, supplied together as a matched front-and-rear set (2 × front axle spring F21-15-021-02-VA · F21-81-016-01-RA · M45-85-014-01-01). Dampers, top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411451846980,"sku":"E20-81-016-03-22","price":184.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-sportline-lowering-springs-clean.jpg?v=1791831021"},{"product_id":"e90-81-016-02-22","title":"Eibach B12 Pro-Kit Suspension Kit E90-81-016-02-22 – Seat Ibiza \/ VW Polo \/ Škoda Fabia","description":"\u003cp\u003eEibach B12 Pro-Kit suspension kit E90-81-016-02-22 for the Seat Ibiza V (KJ1), lowering the car by 25–40 mm at the front and 25–30 mm at the rear, approved to 940 kg front and 870 kg rear axle load, covering 3 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e B12 Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E90-81-016-02-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 25–40 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 25–30 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 TSI, 1.5 TSI:\u003c\/strong\u003e 25–30 mm front \/ 30 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 TSI:\u003c\/strong\u003e 30–40 mm front \/ 30 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 TSI, 1.5 TSI:\u003c\/strong\u003e 25–30 mm front \/ 25 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e up to 940 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 870 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e 2 × front axle spring F11-15-021-01-VA, F11-81-016-01-RA, M45-85-014-01-01\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamper part numbers:\u003c\/strong\u003e 2 × front damper 22-313669, 2 × rear damper 24-313674\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e ABE15021.pdf, E1081016.pdf, E1081016S.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e Entsorgungsanleitung.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 3 vehicles, 3 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 Pro-Kit is a complete matched suspension set: Eibach Pro-Kit progressive springs supplied together with dampers valved for exactly those rates. The car sits 25–40 mm at the front and 25–30 mm at the rear lower, and because the damping and the spring rates were developed as a pair, the body is controlled on rebound as well as compression — the part a spring-only lowering leaves to a damper that was never tuned for it.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Seat Ibiza V (KJ1), from 01\/2017, FWD; Skoda Fabia IV (PJ3), from 06\/2021, FWD; and Volkswagen Polo (AW1, BZ1), from 06\/2017, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eThe full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach B12 Pro-Kit for this vehicle — matched springs and dampers for both axles, supplied together so the spring rates and the damping are the pair they were developed as. Springs: 2 × front axle spring F11-15-021-01-VA · F11-81-016-01-RA · M45-85-014-01-01. Dampers: 2 × front damper 22-313669 · 2 × rear damper 24-313674. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eExcept electronic suspension systems.\u003c\/li\u003e\n  \u003cli\u003eDue to the usage of gas pressure technology of the B6 \/ B8 dampers the dimension of lowering \/ lifting may vary slightly vehicle-specifically. Functionality of electronic dampers is not applicable . - If available, we recommend to use Pro-Tronic.\u003c\/li\u003e\n  \u003cli\u003eIf replacement required: Please contact your dealer. - Please have your car documents, part numbers and sales receipt ready to give detailed information.\u003c\/li\u003e\n  \u003cli\u003eFor cars with rear live axle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411452371268,"sku":"E90-81-016-02-22","price":801.29,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-b12-pro-kit-springs-and-dampers-clean.jpg?v=1791831021"},{"product_id":"e90-81-016-03-22","title":"Eibach B12 Pro-Kit Suspension Kit E90-81-016-03-22 – Seat Ibiza \/ VW Polo \/ Škoda Fabia","description":"\u003cp\u003eEibach B12 Pro-Kit suspension kit E90-81-016-03-22 for the Seat Ibiza V (KJ1), lowering the car by 25–35 mm at the front and 25–30 mm at the rear, approved to 1010 kg front and 870 kg rear axle load, covering 3 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e B12 Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E90-81-016-03-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 25–35 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 25–30 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.6 TDI:\u003c\/strong\u003e 25–30 mm front \/ 30 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 TSI, 1.5 TSI:\u003c\/strong\u003e 35 mm front \/ 30 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.5 TSI, 1.6 TDI:\u003c\/strong\u003e 25–30 mm front \/ 25 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 1010 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 870 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e 2 × front axle spring F11-15-021-02-VA, F11-81-016-01-RA, M45-85-014-01-01\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamper part numbers:\u003c\/strong\u003e 2 × front damper 22-313669, 2 × rear damper 24-313674\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e ABE15021.pdf, E1081016.pdf, E1081016S.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e Entsorgungsanleitung.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 3 vehicles, 3 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 Pro-Kit is a complete matched suspension set: Eibach Pro-Kit progressive springs supplied together with dampers valved for exactly those rates. The car sits 25–35 mm at the front and 25–30 mm at the rear lower, and because the damping and the spring rates were developed as a pair, the body is controlled on rebound as well as compression — the part a spring-only lowering leaves to a damper that was never tuned for it.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Seat Ibiza V (KJ1), from 01\/2017, FWD; Skoda Fabia IV (PJ3), from 06\/2021, FWD; and Volkswagen Polo (AW1, BZ1), from 11\/2017, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eThe full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach B12 Pro-Kit for this vehicle — matched springs and dampers for both axles, supplied together so the spring rates and the damping are the pair they were developed as. Springs: 2 × front axle spring F11-15-021-02-VA · F11-81-016-01-RA · M45-85-014-01-01. Dampers: 2 × front damper 22-313669 · 2 × rear damper 24-313674. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eExcept electronic suspension systems.\u003c\/li\u003e\n  \u003cli\u003eDue to the usage of gas pressure technology of the B6 \/ B8 dampers the dimension of lowering \/ lifting may vary slightly vehicle-specifically. Functionality of electronic dampers is not applicable . - If available, we recommend to use Pro-Tronic.\u003c\/li\u003e\n  \u003cli\u003eIf replacement required: Please contact your dealer. - Please have your car documents, part numbers and sales receipt ready to give detailed information.\u003c\/li\u003e\n  \u003cli\u003eFor cars with rear live axle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411453124932,"sku":"E90-81-016-03-22","price":848.48,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-b12-pro-kit-springs-and-dampers-clean.jpg?v=1791831021"},{"product_id":"pss65-81-010-01-22","title":"Eibach Pro-Street-S Coilover Kit PSS65-81-010-01-22 – Seat Ibiza \/ Audi A1 and more","description":"\u003cp\u003eEibach Pro-Street-S coilover kit PSS65-81-010-01-22 for the Audi A1 (8X1, 8XK), a 15–60 mm at the front and 15–65 mm at the rear change in ride height, approved to 900 kg front and 840 kg rear axle load, covering 10 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Pro-Street-S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PSS65-81-010-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 15–60 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 15–65 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 TFSI, 1.2 TFSI, 1.4 TFSI, 1.4 TDI, 1.6 TDI:\u003c\/strong\u003e 15–50 mm front \/ 15–50 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 TFSI, 1.2 TFSI, 1.4 TFSI, 1.4 TDI, 1.6 TDI:\u003c\/strong\u003e 15–50 mm front \/ 25–50 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0, 1.0 TSI, 1.2, 1.2 TSI, 1.2 TDI, 1.4, 1.6, 1.6 TDI, 2.0, 1.4 TSI, 1.4 TDI:\u003c\/strong\u003e 30–60 mm front \/ 25–50 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0, 1.0 TSI, 1.2, 1.2 TSI, 1.2 TDI, 1.4, 1.4 TSI, 1.6, 1.4 TDI, 1.6 TDI:\u003c\/strong\u003e 15–50 mm front \/ 30–55 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0, 1.0 TSI 1.2 TSI, 1.4 TSI R5, 1.4 TDI, 1.6, 1.0 TSI, 1.2 TSI:\u003c\/strong\u003e 25–50 mm front \/ 35–60 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0, 1.0 TSI, 1.2, 1.4, 1.2 TSI, 1.2 TSI 16V, 1.4 GTI, 1.4 TSI, 1.6:\u003c\/strong\u003e 20–50 mm front \/ 40–65 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e up to 910 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e up to 840 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e ERS-H-170-60-0050, 2 × rear axle spring F67-70-010-01-HA, ERS-N-080-60-0020\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamper part numbers:\u003c\/strong\u003e 2 × front damper PSS66-81-010-01-VA, 2 × rear damper PSS66-85-008-01-HA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E6581010.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e M658101001.pdf, Entsorgungsanleitung.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 10 vehicles, 10 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003ePro-Street-S is a height-adjustable coilover set: ride height is set anywhere across 15–60 mm at the front and 15–65 mm at the rear by moving the spring seat on the strut body, so the stance can be tuned to the wheel and tyre actually fitted. Damping is fixed and factory-valved for the spring rates supplied, which keeps setup simple — set the height, check the geometry, drive.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Audi A1 (8X1, 8XK), 05\/2010–10\/2018, FWD; Audi A1 Sportback (8XA, 8XF), 11\/2011–10\/2018, FWD; Seat Ibiza IV (6J5, 6P1), 03\/2008–06\/2017, FWD; Seat Ibiza IV Sportcoupe (6J1, 6P5), 06\/2008–12\/2016, FWD; Seat Ibiza IV ST (6J8, 6P8), 03\/2010–07\/2016, FWD; Skoda Fabia III (NJ3), from 08\/2014, FWD; Skoda Fabia III Estate \/ Station Wagon (NJ5, NJ5), from 10\/2014, FWD; Volkswagen Polo (6R1, 6C1), from 06\/2009, FWD; Volkswagen Polo VAN (6R), from 06\/2009; and Volkswagen Polo Saloon \/ Saloon, from 05\/2010, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-audi\"\u003eAudi\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Pro-Street-S coilover set for this vehicle — adjustable strut assemblies and their matched springs for both axles, supplied together. Struts: 2 × front damper PSS66-81-010-01-VA · 2 × rear damper PSS66-85-008-01-HA. Springs: ERS-H-170-60-0050 · 2 × rear axle spring F67-70-010-01-HA · ERS-N-080-60-0020. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eFront axle height adjustable by threaded strut, rear axle by height adjustable unit.\u003c\/li\u003e\n  \u003cli\u003eIn order to ensure sufficient clearance it may be necessary to use wheel spacers if the car is equipped with original wheel sizes.\u003c\/li\u003e\n  \u003cli\u003eIn some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.\u003c\/li\u003e\n  \u003cli\u003eIf replacement required: You will find the components in the Components Certificate at the point \"Amendment of the vehicle documents\". The Components Certificate can be downloaded on: www.eibach.com - click on British flag - Online Catalog \/ Product \u0026amp; Components Certificate Search (RED BUTTON)\u003c\/li\u003e\n  \u003cli\u003eExcept electronic suspension systems.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411456368964,"sku":"PSS65-81-010-01-22","price":1330.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-pro-street-s-coilover-kit-clean.jpg?v=1791831021"},{"product_id":"pss65-81-016-01-22","title":"Eibach Pro-Street-S Coilover Kit PSS65-81-016-01-22 – Seat Ibiza \/ VW Polo \/ Škoda Fabia","description":"\u003cp\u003eEibach Pro-Street-S coilover kit PSS65-81-016-01-22 for the Seat Ibiza V (KJ1), a 30–65 mm change in ride height, covering 3 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Pro-Street-S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PSS65-81-016-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 30–65 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 30–65 mm, depending on engine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0, 1.0 MPi, 1.0 TSI, 1.5 TSI, 1.6, 1.6 TDI:\u003c\/strong\u003e 35–65 mm front \/ 35–65 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1.0 MPI, 1.0 TSI, 1.5 TSI, 1.0, 1.6 TDI:\u003c\/strong\u003e 30–60 mm front \/ 30–60 mm rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e 2 × front axle spring F67-15-021-01-VA, 2 × rear axle spring F67-70-010-01-HA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamper part numbers:\u003c\/strong\u003e 2 × front damper PSS66-81-016-01-FA, 2 × rear damper PSS66-81-016-01-RA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E6581016.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e M6581016.PDF, Entsorgungsanleitung.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 3 vehicles, 3 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003ePro-Street-S is a height-adjustable coilover set: ride height is set anywhere across 30–65 mm by moving the spring seat on the strut body, so the stance can be tuned to the wheel and tyre actually fitted. Damping is fixed and factory-valved for the spring rates supplied, which keeps setup simple — set the height, check the geometry, drive.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Seat Ibiza V (KJ1), from 01\/2017, FWD; Skoda Fabia IV (PJ3), from 06\/2021, FWD; and Volkswagen Polo (AW1, BZ1), from 06\/2017, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eThe full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Pro-Street-S coilover set for this vehicle — adjustable strut assemblies and their matched springs for both axles, supplied together. Struts: 2 × front damper PSS66-81-016-01-FA · 2 × rear damper PSS66-81-016-01-RA. Springs: 2 × front axle spring F67-15-021-01-VA · 2 × rear axle spring F67-70-010-01-HA. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eFront axle height adjustable by threaded strut, rear axle by height adjustable unit.\u003c\/li\u003e\n  \u003cli\u003eIn some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.\u003c\/li\u003e\n  \u003cli\u003eOnce the suspension kit is installed the electronic damper control will not be available anymore. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eIf replacement required: You will find the components in the Components Certificate at the point \"Amendment of the vehicle documents\". The Components Certificate can be downloaded on: www.eibach.com - click on British flag - Online Catalog \/ Product \u0026amp; Components Certificate Search (RED BUTTON)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411459711300,"sku":"PSS65-81-016-01-22","price":1427.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-pro-street-s-coilover-kit-clean.jpg?v=1791831021"},{"product_id":"e7910-140","title":"Eibach Pro-Kit Lowering Springs E7910-140 – Škoda Fabia I (6Y2)","description":"\u003cp\u003eEibach Pro-Kit lowering springs E7910-140 for the Skoda Fabia I (6Y2), lowering the car by 30 mm, approved to 900 kg front and 800 kg rear axle load.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E7910-140\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 900 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 800 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e F7910001, F7910002\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E7910-140.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 1 vehicle, 1 fitment row\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003ePro-Kit is Eibach's progressive-rate lowering spring set. It drops the car by 30 mm on the standard dampers, so the centre of gravity falls and body roll through a corner is reduced without turning the ride harsh. The progressive rate stays compliant over small bumps and firms up as the spring compresses, which is what keeps the car usable on poor roads while still feeling tied down at speed.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Skoda Fabia I (6Y2), 08\/1999–03\/2008, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-skoda-fabia\"\u003eŠkoda Fabia\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Pro-Kit spring set for this vehicle — springs for both axles, supplied together as a matched front-and-rear set (F7910001 · F7910002). Dampers, top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411478356292,"sku":"E7910-140","price":180.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-pro-kit-performance-lowering-springs-clean.jpg?v=1791831021"},{"product_id":"e7911-140","title":"Eibach Pro-Kit Lowering Springs E7911-140 – Škoda Fabia I (6Y2)","description":"\u003cp\u003eEibach Pro-Kit lowering springs E7911-140 for the Skoda Fabia I (6Y2), lowering the car by 30 mm, approved to 900 kg front and 800 kg rear axle load.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E7911-140\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 900 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 800 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e F7911001, F7910002\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E7911-140.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 1 vehicle, 1 fitment row\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003ePro-Kit is Eibach's progressive-rate lowering spring set. It drops the car by 30 mm on the standard dampers, so the centre of gravity falls and body roll through a corner is reduced without turning the ride harsh. The progressive rate stays compliant over small bumps and firms up as the spring compresses, which is what keeps the car usable on poor roads while still feeling tied down at speed.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Skoda Fabia I (6Y2), 08\/1999–03\/2008, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-skoda-fabia\"\u003eŠkoda Fabia\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Pro-Kit spring set for this vehicle — springs for both axles, supplied together as a matched front-and-rear set (F7911001 · F7910002). Dampers, top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411479765316,"sku":"E7911-140","price":173.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-pro-kit-performance-lowering-springs-clean.jpg?v=1791831021"},{"product_id":"e90-79-001-01-22","title":"Eibach B12 Pro-Kit Suspension Kit E90-79-001-01-22 – Škoda Fabia I (6Y2)","description":"\u003cp\u003eEibach B12 Pro-Kit suspension kit E90-79-001-01-22 for the Skoda Fabia I (6Y2), lowering the car by 30 mm, approved to 900 kg front and 800 kg rear axle load.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e B12 Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E90-79-001-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 900 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 800 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e F7910001, F7910002\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamper part numbers:\u003c\/strong\u003e 2 × front damper 35-052180, 2 × rear damper 24-067904\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E7910-140.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e Entsorgungsanleitung.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 1 vehicle, 1 fitment row\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 Pro-Kit is a complete matched suspension set: Eibach Pro-Kit progressive springs supplied together with dampers valved for exactly those rates. The car sits 30 mm lower, and because the damping and the spring rates were developed as a pair, the body is controlled on rebound as well as compression — the part a spring-only lowering leaves to a damper that was never tuned for it.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Skoda Fabia I (6Y2), 08\/1999–03\/2008, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-skoda-fabia\"\u003eŠkoda Fabia\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach B12 Pro-Kit for this vehicle — matched springs and dampers for both axles, supplied together so the spring rates and the damping are the pair they were developed as. Springs: F7910001 · F7910002. Dampers: 2 × front damper 35-052180 · 2 × rear damper 24-067904. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eDue to the usage of gas pressure technology of the B6 \/ B8 dampers the dimension of lowering \/ lifting may vary slightly vehicle-specifically. Functionality of electronic dampers is not applicable . - If available, we recommend to use Pro-Tronic.\u003c\/li\u003e\n  \u003cli\u003eIf replacement required: Please contact your dealer. - Please have your car documents, part numbers and sales receipt ready to give detailed information.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411482255684,"sku":"E90-79-001-01-22","price":881.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-b12-pro-kit-springs-and-dampers-clean.jpg?v=1791831021"},{"product_id":"e90-79-001-02-22","title":"Eibach B12 Pro-Kit Suspension Kit E90-79-001-02-22 – Škoda Fabia I (6Y2)","description":"\u003cp\u003eEibach B12 Pro-Kit suspension kit E90-79-001-02-22 for the Skoda Fabia I (6Y2), lowering the car by 30 mm, approved to 900 kg front and 800 kg rear axle load.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e B12 Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E90-79-001-02-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 900 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 800 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e F7911001, F7910002\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamper part numbers:\u003c\/strong\u003e 2 × front damper 35-052180, 2 × rear damper 24-067904\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E7911-140.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e Entsorgungsanleitung.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 1 vehicle, 1 fitment row\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 Pro-Kit is a complete matched suspension set: Eibach Pro-Kit progressive springs supplied together with dampers valved for exactly those rates. The car sits 30 mm lower, and because the damping and the spring rates were developed as a pair, the body is controlled on rebound as well as compression — the part a spring-only lowering leaves to a damper that was never tuned for it.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Skoda Fabia I (6Y2), 12\/1999–03\/2008, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-skoda-fabia\"\u003eŠkoda Fabia\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach B12 Pro-Kit for this vehicle — matched springs and dampers for both axles, supplied together so the spring rates and the damping are the pair they were developed as. Springs: F7911001 · F7910002. Dampers: 2 × front damper 35-052180 · 2 × rear damper 24-067904. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eDue to the usage of gas pressure technology of the B6 \/ B8 dampers the dimension of lowering \/ lifting may vary slightly vehicle-specifically. Functionality of electronic dampers is not applicable . - If available, we recommend to use Pro-Tronic.\u003c\/li\u003e\n  \u003cli\u003eIf replacement required: Please contact your dealer. - Please have your car documents, part numbers and sales receipt ready to give detailed information.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411482812740,"sku":"E90-79-001-02-22","price":907.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-b12-pro-kit-springs-and-dampers-clean.jpg?v=1791831021"}],"url":"https:\/\/suspengo.com\/collections\/suspension-skoda-fabia\/series-b12.oembed","provider":"Suspengo","version":"1.0","type":"link"}