{"title":"Volkswagen Caddy Shock Absorbers \u0026 Suspension","description":"\u003cp\u003eSuspension for the Volkswagen Caddy across the Mk2 (9K9), Mk3 (2K), Mk4 (SA) and Mk5 (SB) generations, in van and passenger form. \u003ca href=\"\/collections\/suspension-volkswagen-caddy\/series-b4\"\u003eBilstein B4\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-volkswagen-caddy\/series-b6\"\u003eB6\u003c\/a\u003e cover standard ride height and \u003ca href=\"\/collections\/suspension-volkswagen-caddy\/series-b8\"\u003eB8\u003c\/a\u003e suits already-lowered cars. Eibach Pro-Kit springs and Pro-Street-S coilovers join this page as well.\u003c\/p\u003e\n\u003ch2\u003eWhich variants this covers\u003c\/h2\u003e\n\u003cp\u003eFour generations are listed, covering panel vans, pick-ups and the family-carrying variants, in front-wheel drive and all-wheel drive on some Mk3 cars. Payload rating matters more here than on a car: a damper specified for an unladen passenger Caddy will not last under trade use. Confirm the chassis code and the body — van and passenger listings differ. For other Volkswagens see \u003ca href=\"\/collections\/suspension-volkswagen\"\u003eVolkswagen suspension\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eChoosing between the ranges\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"\/collections\/suspension-volkswagen-caddy\/series-b4\"\u003eBilstein B4\u003c\/a\u003e dominates this page and is the right answer for most Caddies — OE-comparable damping at standard ride height with the original springs retained, restoring the ride a working van has lost. \u003ca href=\"\/collections\/suspension-volkswagen-caddy\/series-b6\"\u003eBilstein B6\u003c\/a\u003e is firmer at the same height and holds the back end better on a van that regularly carries weight, which is the more common complaint on these. \u003ca href=\"\/collections\/suspension-volkswagen-caddy\/series-b8\"\u003eBilstein B8\u003c\/a\u003e is a shortened damper intended only for a vehicle already lowered by roughly 30–40 mm. For lowering a standard Caddy, Eibach Pro-Kit springs give a moderate drop and Pro-Street-S coilovers allow ride height to be set directly — though on a load-carrying van, dropping it costs both clearance and suspension travel. No Tein ranges are stocked for the Caddy.\u003c\/p\u003e\n\u003ch2\u003eWhat to check before ordering\u003c\/h2\u003e\n\u003cp\u003eFront and rear are separate listings; fit in axle pairs and align afterwards. Renew strut bearings and \u003ca href=\"\/collections\/suspension-volkswagen-caddy\/series-b1\"\u003eprotection kits\u003c\/a\u003e with the dampers. The Caddy caveat is load: rear damping is specified against payload, and a van used for trade work needs the heavier rating even if a lighter one physically fits. Check what the vehicle is actually used for, not just what it is.\u003c\/p\u003e\n\u003ch2\u003eCommon questions for this chassis\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs Tein available for the Caddy?\u003c\/strong\u003e Not currently — this page is Bilstein, with Eibach springs and coilovers joining it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I lower a working van?\u003c\/strong\u003e You can, but you lose travel and clearance. Not advisable if it carries weight.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eB4 or B6 for trade use?\u003c\/strong\u003e B6, for better control when loaded.\u003c\/p\u003e","products":[{"product_id":"bilstein-shock-absorber-19-106397","title":"Bilstein B4 Shock Absorbers 19-106397 – Seat Inca \/ VW Caddy","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-106397\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits SEAT Inca (6K9), 11\/1995–11\/2003, FWD and VW Caddy 2 Van (9K9A), 11\/1995–01\/2004, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e SEO28156615A, 395 527 9, 397 182 5, 393 451 6, 141 156 615 A.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615446151492,"sku":"19-106397","price":59.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-106397_1.jpg?v=1779439507"},{"product_id":"bilstein-shock-absorber-19-142449","title":"Bilstein B4 Shock Absorbers 19-142449 – VW Caddy (2KA, 2KH, 2CA, 2CH)","description":"\u003cp\u003eBilstein B4 OEM Replacement Rear (universal) shock absorber — Bilstein Shock Absorber 19-142449\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits VW Caddy 3 Van (2KA, 2KH, 2CA, 2CH), 03\/2004–03\/2016 and VW Caddy 4 Alltrack Van (SAB), 05\/2015–09\/2020, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 2K0 513 029 L, 2K5 513 029 M, 2K5 513 029 P, 2K0513029M, 2K0513029N.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615458144580,"sku":"19-142449","price":61.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-142449_1.jpg?v=1779439519"},{"product_id":"bilstein-shock-absorber-19-313658","title":"Bilstein B4 Shock Absorbers 19-313658 – VW Caddy III (2KA, 2KH, 2CA, 2CH)","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 19-313658\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits VW Caddy 3 Van (2KA, 2KH, 2CA, 2CH), 03\/2004–03\/2016, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 2K3 513 029 E, 2K3 513 029 A, 2K3 513 029 F, 2K5 513 029 S, 2K5 513 029 R.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615558709572,"sku":"19-313658","price":66.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-313658_1.jpg?v=1779441316"},{"product_id":"bilstein-shock-absorber-21-030338","title":"Bilstein B4 Shock Absorbers 21-030338 – VW Caddy, Golf","description":"\u003cp\u003eBilstein B4 OEM Replacement Front (universal) shock absorber — Bilstein Shock Absorber 21-030338\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits VW Golf 1 (17), 04\/1974–12\/1985, FWD and VW Caddy 1 (14), 08\/1979–11\/2008, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 175 412 031, 171 412 031 J, 171 412 031 H.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615567655236,"sku":"21-030338","price":63.37,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/21-030338_1.jpg?v=1776084849"},{"product_id":"bilstein-shock-absorber-22-044761","title":"Bilstein B4 Shock Absorbers 22-044761 – VW Caddy \/ Seat Arosa and more","description":"\u003cp\u003eBilstein B4 OEM Replacement Front (universal) shock absorber — Bilstein Shock Absorber 22-044761\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from SEAT and VW, including SEAT Toledo 1 (1L) and SEAT Inca (6K9) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 6N0 413 031 J, 6N0 413 031 H, 6N0 413 031 K.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615571030340,"sku":"22-044761","price":78.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-044761_1.jpg?v=1779441332"},{"product_id":"bilstein-shock-absorber-22-131607","title":"Bilstein B4 Shock Absorbers 22-131607 – VW Golf \/ Audi A3 and more","description":"\u003cp\u003eBilstein B4 OEM Replacement Front (universal) shock absorber — Bilstein Shock Absorber 22-131607\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 11 models from Audi, SEAT, VW and Škoda, including Audi A3 (8P1) and VW Golf 5 (1K1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1K0 412 021 JL, 1K0 413 031 DL, 1K0 413 031 BA, 1K0 413 031 BC, 1K0 413 031 BJ.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615581712708,"sku":"22-131607","price":65.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-131607_1.jpg?v=1776084781"},{"product_id":"bilstein-shock-absorber-22-131614","title":"Bilstein B4 Shock Absorbers 22-131614 – Audi A3 \/ VW Caddy and more","description":"\u003cp\u003eBilstein B4 OEM Replacement Front (universal) shock absorber — Bilstein Shock Absorber 22-131614\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 9 models from Audi, SEAT, VW and Škoda, including Audi A3 (8P1) and VW Golf 5 (1K1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1 T0 413 031 CJ, 1T0 413 031 GN, 1T0 413 031 GP, 1T0 413 031 JK, 1T0413031HQ.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615581745476,"sku":"22-131614","price":73.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-131614_1.jpg?v=1776084780"},{"product_id":"bilstein-shock-absorber-22-139184","title":"Bilstein B4 Shock Absorbers 22-139184 – VW Caddy, Golf and more","description":"\u003cp\u003eBilstein B4 OEM Replacement Front (universal) shock absorber — Bilstein Shock Absorber 22-139184\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 8 models from Audi, SEAT, VW and Škoda, including Audi A3 (8P1) and VW Golf 5 (1K1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1K0 413 031 CA.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615582400836,"sku":"22-139184","price":70.31,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-139184_1.jpg?v=1776084776"},{"product_id":"bilstein-shock-absorber-22-139191","title":"Bilstein B4 Shock Absorbers 22-139191 – VW Caddy, Golf and more","description":"\u003cp\u003eBilstein B4 OEM Replacement Front (universal) shock absorber — Bilstein Shock Absorber 22-139191\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from Audi, SEAT, VW and Škoda, including Audi A3 (8P1) and VW Golf 5 (1K1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1T0413031DB, 1T0 413 031 DJ, 1T0 413 031 GE, 5C0 413 031 M, 1T0 413 031 DC.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615582499140,"sku":"22-139191","price":71.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-139191_1.jpg?v=1776084775"},{"product_id":"bilstein-shock-absorber-22-183750","title":"Bilstein B4 Shock Absorbers 22-183750 – Audi Q3 \/ VW Caddy Alltrack \/ VW Tiguan","description":"\u003cp\u003eBilstein B4 OEM Replacement Front (universal) shock absorber — Bilstein Shock Absorber 22-183750\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits VW Tiguan 1 (5N), 09\/2007–07\/2018, FWD, Audi Q3 (8UB, 8UG), 06\/2011–03\/2020 and VW Caddy 4 Alltrack Van (SAB), 05\/2015–09\/2020, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5N0 413 031 AA, 5N0 413 031 AS, 5N0 413 031 AT, 5N0 413 031 K, 5N0 413 031 T.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615589904708,"sku":"22-183750","price":92.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-183750_1.jpg?v=1776084728"},{"product_id":"bilstein-shock-absorber-22-239594","title":"Bilstein B4 Shock Absorbers 22-239594 – VW Golf, Caddy, Scirocco","description":"\u003cp\u003eBilstein B4 OEM Replacement shock absorber for 4 VW models — Bilstein Shock Absorber 22-239594.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 VW models including Golf 1 (17) and Caddy 1 (14) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 171 412 031 F, 171 412 031 G, 171 412 031 J.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615625523524,"sku":"22-239594","price":124.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-239594_1.jpg?v=1779441406"},{"product_id":"bilstein-shock-absorber-17-104029","title":"Bilstein B4 Shock Absorbers 17-104029 – VW Polo, Caddy and more","description":"\u003cp\u003eBilstein B2 Twin-Tube Front (universal) shock absorber — Bilstein Shock Absorber 17-104029\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Oil Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B2 Twin-Tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB2 is Bilstein's twin-tube hydraulic damper, an older line built for OE-equivalent replacement on the vehicles it was developed for. Damping is consistent and predictable rather than sporting, and the hydraulic (non-gas) construction suits the applications it was originally specified on. Choose it when matching an original fitment rather than upgrading. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 13 models from SEAT and VW, including VW Golf 3 (1H1) and SEAT Toledo 1 (1L) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1H0 413 031 N, 6K0 413 031 G, 6K0 413 031 F, 6N0 413 031 H, 6N0 413 031 J.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B2 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615707083076,"sku":"17-104029","price":65.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/17-104029_1.jpg?v=1779438558"},{"product_id":"bilstein-shock-absorber-22-323743","title":"Bilstein B6 Shock Absorbers 22-323743 – Ford Tourneo Connect Grand \/ VW Caddy California and more","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 6 models from Ford, VW and Škoda — Bilstein Shock Absorber 22-323743.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 6 models from Ford, VW and Škoda, including VW Golf 8 (CD1, DA1) and VW T-Roc Cabriolet (AC7, AC8) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 3WA-413-031-AG, 3WA-413-031-AH, 3WA-413-031-S, 3WA-413-031-T, 5R3 413 031 H, 5R3 413 031 J.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615735034180,"sku":"22-323743","price":178.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-323743_1.jpg?v=1779441467"},{"product_id":"bilstein-shock-absorber-24-202633","title":"Bilstein B6 Shock Absorbers 24-202633 – VW Caddy (2KA, 2KH, 2CA, 2CH)","description":"\u003cp\u003eBilstein B6 Performance shock absorber for the VW Caddy 3 Van and Caddy 4 Alltrack Van — Bilstein Shock Absorber 24-202633.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits VW Caddy 3 Van (2KA, 2KH, 2CA, 2CH), 03\/2004–03\/2016 and VW Caddy 4 Alltrack Van (SAB), 05\/2015–09\/2020, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 2K0 513 029 L, 2K3 513 029 E, 2K3 513 029 F.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615810924868,"sku":"24-202633","price":150.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-202633_1.jpg?v=1779441505"},{"product_id":"bilstein-shock-absorber-24-323727","title":"Bilstein B6 Shock Absorbers 24-323727 – Ford Tourneo Connect Grand \/ VW Caddy California","description":"\u003cp\u003eBilstein B6 Performance shock absorber for VW Caddy 5 California and Ford Tourneo Connect Grand Tourneo Connect V761 Van — Bilstein Shock Absorber 24-323727.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits VW Caddy 5 California (SBB, SBJ), from 09\/2020, AWD and Ford Tourneo Connect Grand Tourneo Connect V761 Van (SK), from 02\/2022 — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615825342788,"sku":"24-323727","price":165.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-323727_1.jpg?v=1779441533"},{"product_id":"bilstein-shock-absorber-34-001370","title":"Bilstein B6 Shock Absorbers 34-001370 – VW Golf, Caddy, Scirocco","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 4 VW models — Bilstein Shock Absorber 34-001370.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 VW models including Golf 1 (17) and Caddy 1 (14) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 171 412 031 H, 171 412 031 J, 175 412 031.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615833305412,"sku":"34-001370","price":177.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/34-001370_1.jpg?v=1776083818"},{"product_id":"bilstein-shock-absorber-35-108177","title":"Bilstein B6 Shock Absorbers 35-108177 – VW Golf, Touran and more","description":"\u003cp\u003eBilstein B6 Sport Front (universal) shock absorber — Bilstein Shock Absorber 35-108177\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Sport\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 Sport is the sport-tuned damper for standard ride height, sold under Bilstein's earlier B6 naming. Firmer rebound control than the OE part means less float over crests and tighter body movement through quick direction changes, while ride height and spring rates stay untouched. Suited to spirited road driving on a car you do not want to lower. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 23 models from Audi, SEAT, VW and Škoda, including Audi A3 (8P1) and VW Golf 5 (1K1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5N0413031AE, 1T0 413 031 DC, 1T0 413 031 DH, 1T0 413 031 HN, 1T0 413 031 KA.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 Sport damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615840874820,"sku":"35-108177","price":224.73,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-108177.jpg?v=1776007487"},{"product_id":"bilstein-shock-absorber-35-108191","title":"Bilstein B8 Shock Absorbers 35-108191 – VW Golf \/ Audi A3 and more","description":"\u003cp\u003eBilstein B8 Sprint Front (universal) shock absorber — Bilstein Shock Absorber 35-108191\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Mono-Tube Upside Down\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B8 Sprint\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height. This unit is an upside-down monotube: the larger-diameter body is at the top, reducing unsprung weight and stiffening the strut against bending loads.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 13 models from Audi, SEAT, VW and Škoda, including Audi A3 (8P1) and VW Golf 5 (1K1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615840907588,"sku":"35-108191","price":228.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-108191.jpg?v=1776007487"},{"product_id":"bilstein-shock-absorber-35-239611","title":"Bilstein B6 Shock Absorbers 35-239611 – VW Golf, Caddy, Scirocco","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 4 VW models — Bilstein Shock Absorber 35-239611.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 VW models including Golf 1 (17) and Caddy 1 (14) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615848902980,"sku":"35-239611","price":270.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-239611_1.jpg?v=1776083714"},{"product_id":"bilstein-shock-absorber-35-239628","title":"Bilstein B8 Shock Absorbers 35-239628 – VW Golf, Caddy, Scirocco","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 4 VW models — Bilstein Shock Absorber 35-239628.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 VW models including Golf 1 (17) and Caddy 1 (14) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615848935748,"sku":"35-239628","price":251.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-239628_1.jpg?v=1776083713"},{"product_id":"bilstein-shock-absorber-35-250869","title":"Bilstein B8 Shock Absorbers 35-250869 – VW Golf, Caddy and more","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 9 models from Audi, VW and Škoda — Bilstein Shock Absorber 35-250869.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 9 models from Audi, VW and Škoda, including Audi A3 (8P1) and VW Golf 5 (1K1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615849820484,"sku":"35-250869","price":249.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-250869_1.jpg?v=1776083707"},{"product_id":"bilstein-shock-absorber-protection-kit-11-101307","title":"Bilstein B1 Shock Absorber Protection Kit 11-101307 – VW Caddy, Golf and more","description":"\u003cp\u003eBilstein B1 Shock absorber protection kit for AUDI\/ VW — Bilstein Shock absorber protection kit 11-101307.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 957\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.31 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 16 models from Audi, SEAT and VW, including Audi 80 B1 Avant (331) and VW Golf 1 (17) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne protection kit for a single damper — bump stop and dust cover. It covers one corner, so order two per axle. The damper itself is not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. These are wear parts: cover is against manufacturing defects, not against the wear they are fitted to absorb. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618229006660,"sku":"11-101307","price":19.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/11-101307.jpg?v=1786969979"},{"product_id":"bilstein-shock-absorber-protection-kit-11-103455","title":"Bilstein B1 Shock Absorber Protection Kit 11-103455 – VW Caddy, New Beetle and more","description":"\u003cp\u003eBilstein B1 Shock absorber protection kit for AUDI\/VW\/SEAT\/SKODA — Bilstein Shock absorber protection kit 11-103455.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 957\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.32 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 8 models from SEAT, VW and Škoda, including SEAT Toledo 2 (1M) and VW New Beetle (9C1, 1C1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne protection kit for a single damper — bump stop and dust cover. It covers one corner, so order two per axle. The damper itself is not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. These are wear parts: cover is against manufacturing defects, not against the wear they are fitted to absorb. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618229268804,"sku":"11-103455","price":21.09,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/11-103455.jpg?v=1778825724"},{"product_id":"bilstein-suspension-strut-support-bearing-12-117659","title":"Bilstein B1 Strut Support Bearing 12-117659 – VW Caddy \/ Ford Galaxy and more","description":"\u003cp\u003eBilstein B1 Suspension strut support bearing for 14 models from Ford, SEAT and VW — Bilstein Suspension strut support bearing 12-117659.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 952\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.47 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 14 models from Ford, SEAT and VW, including SEAT Toledo 1 (1L) and VW Golf 3 Van (1H1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 357 412 331 A, 357 412 331 A S1, 357 412 331 A S2\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B1 strut support bearing — a single corner. Order two to do an axle. The strut, spring and top nut are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the bearing is fitted with the top nut torqued to specification and the strut re-assembled correctly. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618285367620,"sku":"12-117659","price":17.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/bilstein-strut-support-bearing_018.jpg?v=1786996576"},{"product_id":"bilstein-suspension-strut-support-bearing-12-244751","title":"Bilstein B1 Strut Support Bearing 12-244751 – VW Golf, Caddy, Scirocco","description":"\u003cp\u003eBilstein B1 Suspension strut support bearing for 4 VW models — Bilstein Suspension strut support bearing 12-244751.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 952\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.85 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 VW models including Golf 1 (17) and Caddy 1 (14) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 171 412 329 A, 175 412 329 AMH\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B1 strut support bearing — a single corner. Order two to do an axle. The strut, spring and top nut are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the bearing is fitted with the top nut torqued to specification and the strut re-assembled correctly. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618290479428,"sku":"12-244751","price":45.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/bilstein-strut-support-bearing_112.jpg?v=1786996835"},{"product_id":"bilstein-suspension-strut-support-bearing-12-244942","title":"Bilstein B1 Strut Support Bearing 12-244942 – VW Golf, Touran and more","description":"\u003cp\u003eBilstein B1 Suspension strut support bearing for 22 models from Audi, SEAT, VW and 1 other make — Bilstein Suspension strut support bearing 12-244942.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 952\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.11 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 22 models from Audi, SEAT, VW and Škoda, including Audi A3 (8P1) and VW Touran 1 (1T1, 1T2) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 1K0 412 331 B, 1KD 412 331 A\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B1 strut support bearing — a single corner. Order two to do an axle. The strut, spring and top nut are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the bearing is fitted with the top nut torqued to specification and the strut re-assembled correctly. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618291134788,"sku":"12-244942","price":35.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/bilstein-strut-support-bearing_130.jpg?v=1786996901"},{"product_id":"pss65-85-019-04-22","title":"Eibach Pro-Street-S Coilover Kit PSS65-85-019-04-22 – VW Caddy III (2KA, 2KH, 2CA, 2CH)","description":"\u003cp\u003eEibach Pro-Street-S coilover kit PSS65-85-019-04-22 for the Volkswagen Caddy III Estate \/ Estate (2KB, 2KJ, 2CB, 2CJ), a 50–90 mm change in ride height, approved to 1235 kg front and 1300 kg rear axle load, covering 4 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Pro-Street-S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PSS65-85-019-04-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 50–90 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 50–90 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 1235 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 1300 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e 2 × front axle spring F67-85-014-05-VA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamper part numbers:\u003c\/strong\u003e 2 × front damper PSS66-85-016-02-VA, 2 × rear damper AM10-85-019-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E658501902.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e M658501904.pdf, Entsorgungsanleitung.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 4 vehicles, 4 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003ePro-Street-S is a height-adjustable coilover set: ride height is set anywhere across 50–90 mm by moving the spring seat on the strut body, so the stance can be tuned to the wheel and tyre actually fitted. Damping is fixed and factory-valved for the spring rates supplied, which keeps setup simple — set the height, check the geometry, drive.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Volkswagen Caddy III Estate \/ Estate (2KB, 2KJ, 2CB, 2CJ), 03\/2004–05\/2015; Volkswagen Caddy III Van \/ BOX (2KA, 2KH, 2CA, 2CH), 03\/2004–05\/2015, FWD; Volkswagen Caddy IV Estate \/ Estate (SAB, SAJ), from 05\/2015; and Volkswagen Caddy IV Van \/ BOX (SAA, SAH), from 05\/2015 — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-volkswagen-caddy\"\u003eVolkswagen Caddy\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Pro-Street-S coilover set for this vehicle — adjustable strut assemblies and their matched springs for both axles, supplied together. Struts: 2 × front damper PSS66-85-016-02-VA · 2 × rear damper AM10-85-019-01-22. Springs: 2 × front axle spring F67-85-014-05-VA. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eFront axle height adjustable by threaded strut, rear axle by height adjustable unit.\u003c\/li\u003e\n  \u003cli\u003eOnly for vehicles with front damper diameter of 55 mm\u003c\/li\u003e\n  \u003cli\u003eIn some cases additional OE-Parts for the installation of the suspension componends are required. Therefore please take a look at the corresponding technical documents which are available on our website.\u003c\/li\u003e\n  \u003cli\u003eIf replacement required: You will find the components in the Components Certificate at the point \"Amendment of the vehicle documents\". The Components Certificate can be downloaded on: www.eibach.com - click on British flag - Online Catalog \/ Product \u0026amp; Components Certificate Search (RED BUTTON)\u003c\/li\u003e\n  \u003cli\u003eNot for \"Caddy Maxi\"\u003c\/li\u003e\n  \u003cli\u003eVehicles fitted to the HA with two leaf springs per side must be converted to a leaf spring. (For Caddy to Mod.2015 VW Part No .: Leaf spring 2K5 511 151 N; for Caddy from model 2015 VW Part No. 2K5 511 151 AA)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411478913348,"sku":"PSS65-85-019-04-22","price":1424.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-pro-street-s-coilover-kit-clean.jpg?v=1791831021"},{"product_id":"pss65-85-053-02-22","title":"Eibach Pro-Street-S Coilover Kit PSS65-85-053-02-22 – VW Caddy California (SBB, SBJ)","description":"\u003cp\u003eEibach Pro-Street-S coilover kit PSS65-85-053-02-22 for the Volkswagen Caddy V (SBB, SBJ), a 40–60 mm at the front and 30–50 mm at the rear change in ride height, approved to 1230 kg front and 1355 kg rear axle load, covering 2 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Pro-Street-S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e PSS65-85-053-02-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 40–60 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 30–50 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 1230 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 1355 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e F67-85-043-02-FA, F67-85-053-02-RA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamper part numbers:\u003c\/strong\u003e 2 × front damper PSS66-85-043-01-FA, 2 × rear damper PSS66-85-053-01-RA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E658505301.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e M658505302.pdf, Entsorgungsanleitung.pdf, M658505301.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 2 vehicles, 2 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003ePro-Street-S is a height-adjustable coilover set: ride height is set anywhere across 40–60 mm at the front and 30–50 mm at the rear by moving the spring seat on the strut body, so the stance can be tuned to the wheel and tyre actually fitted. Damping is fixed and factory-valved for the spring rates supplied, which keeps setup simple — set the height, check the geometry, drive.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Volkswagen Caddy V (SBB, SBJ), from 09\/2020, AWD; and Volkswagen Caddy California V Camper (SBB, SBJ), from 09\/2020 — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-volkswagen-caddy\"\u003eVolkswagen Caddy\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Pro-Street-S coilover set for this vehicle — adjustable strut assemblies and their matched springs for both axles, supplied together. Struts: 2 × front damper PSS66-85-043-01-FA · 2 × rear damper PSS66-85-053-01-RA. Springs: F67-85-043-02-FA · F67-85-053-02-RA. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eExcept electronic suspension systems.\u003c\/li\u003e\n  \u003cli\u003eOnly for vehicles with front damper diameter of 55 mm\u003c\/li\u003e\n  \u003cli\u003eIf replacement required: You will find the components in the Components Certificate at the point \"Amendment of the vehicle documents\". The Components Certificate can be downloaded on: www.eibach.com - click on British flag - Online Catalog \/ Product \u0026amp; Components Certificate Search (RED BUTTON)\u003c\/li\u003e\n  \u003cli\u003eNot for \"Caddy Maxi\"\u003c\/li\u003e\n  \u003cli\u003ewheel base: 2755 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411491692868,"sku":"PSS65-85-053-02-22","price":1494.98,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-pro-street-s-coilover-kit-clean.jpg?v=1791831021"},{"product_id":"e10-85-019-01-22","title":"Eibach Pro-Kit Lowering Springs E10-85-019-01-22 – VW Caddy III (2KA, 2KH, 2CA, 2CH)","description":"\u003cp\u003eEibach Pro-Kit lowering springs E10-85-019-01-22 for the Volkswagen Caddy III Estate \/ Estate (2KB, 2KJ, 2CB, 2CJ), lowering the car by 45 mm, approved to 1030 kg front and 1250 kg rear axle load, covering 4 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E10-85-019-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 45 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 45 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 1030 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 1250 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e 2 × front axle spring F11-79-004-02-VA, AM10-85-019-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E1085019.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e M1085019.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 4 vehicles, 4 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003ePro-Kit is Eibach's progressive-rate lowering spring set. It drops the car by 45 mm on the standard dampers, so the centre of gravity falls and body roll through a corner is reduced without turning the ride harsh. The progressive rate stays compliant over small bumps and firms up as the spring compresses, which is what keeps the car usable on poor roads while still feeling tied down at speed.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Volkswagen Caddy III Estate \/ Estate (2KB, 2KJ, 2CB, 2CJ), 03\/2004–05\/2015; Volkswagen Caddy III Van \/ BOX (2KA, 2KH, 2CA, 2CH), 03\/2004–05\/2015, FWD; Volkswagen Caddy IV Estate \/ Estate (SAB, SAJ), from 05\/2015; and Volkswagen Caddy IV Van \/ BOX (SAA, SAH), from 05\/2015 — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-volkswagen-caddy\"\u003eVolkswagen Caddy\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Pro-Kit spring set for this vehicle — springs for both axles, supplied together as a matched front-and-rear set (2 × front axle spring F11-79-004-02-VA · AM10-85-019-01-22). Dampers, top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eNot for \"Caddy Maxi\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411508142404,"sku":"E10-85-019-01-22","price":376.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-pro-kit-performance-lowering-springs-clean.jpg?v=1791831021"},{"product_id":"e10-85-019-02-22","title":"Eibach Pro-Kit Lowering Springs E10-85-019-02-22 – VW Caddy III (2KA, 2KH, 2CA, 2CH)","description":"\u003cp\u003eEibach Pro-Kit lowering springs E10-85-019-02-22 for the Volkswagen Caddy III Estate \/ Estate (2KB, 2KJ, 2CB, 2CJ), lowering the car by 45 mm, approved to 1170 kg front and 1250 kg rear axle load, covering 4 vehicle variants in the Eibach application list.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E10-85-019-02-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 45 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 45 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 1170 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 1250 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e 2 × front axle spring F11-85-012-02-VA, AM10-85-019-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E1085019.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e M1085019.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 4 vehicles, 4 fitment rows\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003ePro-Kit is Eibach's progressive-rate lowering spring set. It drops the car by 45 mm on the standard dampers, so the centre of gravity falls and body roll through a corner is reduced without turning the ride harsh. The progressive rate stays compliant over small bumps and firms up as the spring compresses, which is what keeps the car usable on poor roads while still feeling tied down at speed.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Volkswagen Caddy III Estate \/ Estate (2KB, 2KJ, 2CB, 2CJ), 03\/2004–05\/2015; Volkswagen Caddy III Van \/ BOX (2KA, 2KH, 2CA, 2CH), 03\/2004–05\/2015, FWD; Volkswagen Caddy IV Estate \/ Estate (SAB, SAJ), from 05\/2015; and Volkswagen Caddy IV Van \/ BOX (SAA, SAH), from 05\/2015 — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-volkswagen-caddy\"\u003eVolkswagen Caddy\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Pro-Kit spring set for this vehicle — springs for both axles, supplied together as a matched front-and-rear set (2 × front axle spring F11-85-012-02-VA · AM10-85-019-01-22). Dampers, top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eNot for \"Caddy Maxi\"\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411509125444,"sku":"E10-85-019-02-22","price":376.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-pro-kit-performance-lowering-springs-clean.jpg?v=1791831021"},{"product_id":"e90-85-053-01-22","title":"Eibach B12 Pro-Kit Suspension Kit E90-85-053-01-22 – VW Caddy California (SBB, SBJ)","description":"\u003cp\u003eEibach B12 Pro-Kit suspension kit E90-85-053-01-22 for the Volkswagen Caddy V (SBB, SBJ), lowering the car by 30 mm, approved to 1170 kg front and 1140 kg rear axle load.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e B12 Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E90-85-053-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 1170 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 1140 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e F11-85-042-03-FA, F11-85-053-01-RA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamper part numbers:\u003c\/strong\u003e 2 × front damper 35-229872, 2 × rear damper 24-323727\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E1085053.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting instructions:\u003c\/strong\u003e Entsorgungsanleitung.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 1 vehicle, 1 fitment row\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 Pro-Kit is a complete matched suspension set: Eibach Pro-Kit progressive springs supplied together with dampers valved for exactly those rates. The car sits 30 mm lower, and because the damping and the spring rates were developed as a pair, the body is controlled on rebound as well as compression — the part a spring-only lowering leaves to a damper that was never tuned for it.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Volkswagen Caddy V (SBB, SBJ), from 09\/2020, AWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-volkswagen-caddy\"\u003eVolkswagen Caddy\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach B12 Pro-Kit for this vehicle — matched springs and dampers for both axles, supplied together so the spring rates and the damping are the pair they were developed as. Springs: F11-85-042-03-FA · F11-85-053-01-RA. Dampers: 2 × front damper 35-229872 · 2 × rear damper 24-323727. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003eExcept electronic suspension systems.\u003c\/li\u003e\n  \u003cli\u003eOnly for vehicles with front damper diameter of 55 mm\u003c\/li\u003e\n  \u003cli\u003eDue to the usage of gas pressure technology of the B6 \/ B8 dampers the dimension of lowering \/ lifting may vary slightly vehicle-specifically. Functionality of electronic dampers is not applicable . - If available, we recommend to use Pro-Tronic.\u003c\/li\u003e\n  \u003cli\u003eIf replacement required: Please contact your dealer. - Please have your car documents, part numbers and sales receipt ready to give detailed information.\u003c\/li\u003e\n  \u003cli\u003ewheel base: 2755 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411516858692,"sku":"E90-85-053-01-22","price":988.16,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-b12-pro-kit-springs-and-dampers-clean.jpg?v=1791831021"},{"product_id":"e10-85-053-01-22","title":"Eibach Pro-Kit Lowering Springs E10-85-053-01-22 – VW Caddy California (SBB, SBJ)","description":"\u003cp\u003eEibach Pro-Kit lowering springs E10-85-053-01-22 for the Volkswagen Caddy V (SBB, SBJ), lowering the car by 30 mm, approved to 1170 kg front and 1140 kg rear axle load.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Eibach\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProduct line:\u003c\/strong\u003e Pro-Kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePart number:\u003c\/strong\u003e E10-85-053-01-22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, front:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLowering, rear:\u003c\/strong\u003e 30 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, front:\u003c\/strong\u003e 1170 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePermitted axle load, rear:\u003c\/strong\u003e 1140 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpring part numbers:\u003c\/strong\u003e F11-85-042-03-FA, F11-85-053-01-RA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType-approval marking:\u003c\/strong\u003e T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertificate document:\u003c\/strong\u003e E1085053.pdf\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications covered:\u003c\/strong\u003e 1 vehicle, 1 fitment row\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003ePro-Kit is Eibach's progressive-rate lowering spring set. It drops the car by 30 mm on the standard dampers, so the centre of gravity falls and body roll through a corner is reduced without turning the ride harsh. The progressive rate stays compliant over small bumps and firms up as the spring compresses, which is what keeps the car usable on poor roads while still feeling tied down at speed.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Volkswagen Caddy V (SBB, SBJ), from 09\/2020, AWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003cp\u003eBrowse every suspension part we list for this car in the \u003ca href=\"\/collections\/suspension-volkswagen-caddy\"\u003eVolkswagen Caddy\u003c\/a\u003e collection. The full Eibach range and what each line is for is set out on our \u003ca href=\"\/pages\/eibach-ranges\"\u003eEibach ranges\u003c\/a\u003e page.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Eibach Pro-Kit spring set for this vehicle — springs for both axles, supplied together as a matched front-and-rear set (F11-85-042-03-FA · F11-85-053-01-RA). Dampers, top mounts, bump stops and fixings are re-used from the vehicle unless the specification table above lists them.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Eibach's manufacturer warranty against defects in materials and workmanship. Cover assumes the set is fitted complete and as supplied, by a workshop with the correct spring tooling. Mixing these parts with springs or dampers from another set puts the load outside what this set was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eIf not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer. If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover) are excluded from use of our products.\u003c\/li\u003e\n  \u003cli\u003eThe specifications indicated in the Components Certificate are for the classification of the item \/ vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \"K\" in your vehicle registration certificate or to find at the type plate of your car!)\u003c\/li\u003e\n  \u003cli\u003ePlease verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on www.eibach.de\u003c\/li\u003e\n  \u003cli\u003eIn case of non-conformance the items must not be fitted – please refer to your dealer.\u003c\/li\u003e\n  \u003cli\u003eMounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available. - If the installation deviates from the workshop manual, Eibach-Eibach instructions are available online.\u003c\/li\u003e\n  \u003cli\u003eMounting position - you can \"read\" the mounting position of the springs from the imprint - have them installed just the way you read the imprint.\u003c\/li\u003e\n  \u003cli\u003eWheel adjustment - after completion of the spring\/suspension installation, checking the wheel adjustment is required.\u003c\/li\u003e\n  \u003cli\u003eShock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs. This already can be necessary from 40.000 kilometers OE-damper-milage.\u003c\/li\u003e\n  \u003cli\u003eThe installation of Sport-Shock Absobers is recommended with Sportline springs. As example Bilstein B8\u003c\/li\u003e\n  \u003cli\u003eHere all wheel\/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.\u003c\/li\u003e\n  \u003cli\u003eDepending on engine, gearbox\/transmission, equipment and vehicle tolerances lowering may differ from the values given. The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.\u003c\/li\u003e\n  \u003cli\u003eThe applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded. The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.\u003c\/li\u003e\n  \u003cli\u003eIf your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage\/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.\u003c\/li\u003e\n  \u003cli\u003eWithout levelling control.\u003c\/li\u003e\n  \u003cli\u003eExcept vehicels with 4WD.\u003c\/li\u003e\n  \u003cli\u003ewheel base: 2755 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Eibach","offers":[{"title":"Default Title","offer_id":57411558441284,"sku":"E10-85-053-01-22","price":235.32,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/eibach-pro-kit-performance-lowering-springs-clean.jpg?v=1791831021"}],"url":"https:\/\/suspengo.com\/collections\/suspension-volkswagen-caddy\/series-b6.oembed","provider":"Suspengo","version":"1.0","type":"link"}