{"title":"Volkswagen Golf Mk7 Shock Absorbers \u0026 Suspension","description":"\u003cp\u003eSuspension for the Volkswagen Golf Mk7, 2013–2019, covering chassis codes 5G1, BQ1 and BE1\/BE2. Bilstein B4 and B6 cover standard ride height, Bilstein B12 kits lower the car on matched dampers and springs, and B14 and B16 coilovers give adjustable ride height. All parts listed here are cut for the Mk7 platform.\u003c\/p\u003e\n\u003ch2\u003eWhich variants this covers\u003c\/h2\u003e\n\u003cp\u003eThe Mk7 ran from 2013 to 2019 under chassis codes 5G1 for the hatch and BQ1 and BE1\/BE2 for the estate variants, including GTI and R models. Front-wheel-drive and 4MOTION cars use different rear axles. Cars ordered with DCC adaptive damping take entirely different components from those on passive suspension. For other Golf generations, use \u003ca href=\"\/collections\/suspension-volkswagen-golf\"\u003eVolkswagen Golf suspension\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eChoosing between the ranges\u003c\/h2\u003e\n\u003cp\u003eEverything listed for the Mk7 is Bilstein. \u003ca href=\"\/collections\/suspension-vw-golf-mk7\/series-b4\"\u003eBilstein B4\u003c\/a\u003e is the largest group — the OE-comparable replacement that restores the factory ride at standard height with the original springs retained. \u003ca href=\"\/collections\/suspension-vw-golf-mk7\/series-b6\"\u003eBilstein B6\u003c\/a\u003e is the firmer option at the same height and is the better choice for a GTI or R that has gone soft with mileage. To lower the car, \u003ca href=\"\/collections\/suspension-vw-golf-mk7\/series-b12\"\u003eBilstein B12\u003c\/a\u003e supplies shortened dampers with matched springs as one package. For adjustable ride height, \u003ca href=\"\/collections\/suspension-vw-golf-mk7\/series-b14\"\u003eBilstein B14\u003c\/a\u003e and \u003ca href=\"\/collections\/suspension-vw-golf-mk7\/series-b16\"\u003eB16\u003c\/a\u003e coilovers are both stocked. Bilstein B8 and the Tein ranges are not currently listed for this chassis, so the choice is between restoring standard damping, fitting a B12 kit, or going to coilovers. Coilovers and matched kits on their own are listed on \u003ca href=\"\/collections\/coilovers-vw-golf-mk7\"\u003eVW Golf Mk7 coilovers and suspension kits\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhat to check before ordering\u003c\/h2\u003e\n\u003cp\u003eFront and rear are separate listings and should be fitted in axle pairs, with strut bearings and protection kits renewed at the same time. Align the car afterwards. The Mk7 caveat is DCC: cars ordered with adaptive damping use electronically controlled struts that passive Bilstein dampers cannot replace without removing the system. Check whether your car has DCC before ordering.\u003c\/p\u003e\n\u003ch2\u003eCommon questions for this chassis\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes my Mk7 have DCC?\u003c\/strong\u003e If the driving-mode selector changes suspension firmness, it does — and passive dampers are not a direct replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo hatch and estate share rear parts?\u003c\/strong\u003e Not reliably; the estate codes differ. Select your body style.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill Mk7 parts fit a Mk7.5?\u003c\/strong\u003e The facelift shares the platform, but confirm by build year in the selector.\u003c\/p\u003e","products":[{"product_id":"bilstein-shock-absorber-19-230542","title":"Bilstein B4 Shock Absorbers 19-230542","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 19-230542\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 12 models from Audi, CUPRA, SEAT, VW and Škoda, including Audi A3 (8V1, 8VK) and Škoda Octavia 3 (5E3, NL3, NR3) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0 513 049 BF, 5Q0 513 049 CC, 5Q0 513 049 CD, 5Q0 513 049 CR, 5Q0 513 049 FF.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615507362116,"sku":"19-230542","price":62.55,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-230542.jpg?v=1776007413"},{"product_id":"bilstein-shock-absorber-19-230559","title":"Bilstein B4 Shock Absorbers 19-230559","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 19-230559\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 12 models from CUPRA, VW and Škoda, including Škoda Octavia 3 (5E3, NL3, NR3) and VW Golf 7 (5G1, BQ1, BE1, BE2) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0 513 029 DQ, 5Q0 513 029 DS, 5Q0 513 029 DB, 5Q0 513 029 DQ, 5Q0 513 029 GL.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615508574532,"sku":"19-230559","price":65.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-230559.jpg?v=1776007413"},{"product_id":"bilstein-shock-absorber-19-232157","title":"Bilstein B4 Shock Absorbers 19-232157","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 19-232157\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 9 models from Audi, VW and Škoda, including Audi A3 (8V1, 8VK) and Škoda Octavia 3 (5E3, NL3, NR3) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0 513 049 GN, 5Q0 513 049 BQ, 5Q0 513 049 CH, 5Q0 513 049 DG, 5Q0 513 049 DH.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615510376772,"sku":"19-232157","price":62.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-232157.jpg?v=1776007424"},{"product_id":"bilstein-shock-absorber-19-274195","title":"Bilstein B4 Shock Absorbers 19-274195","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 19-274195\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits VW Golf 7 Variant (BA5, BV5), 04\/2013–01\/2022, VW Golf 7 Alltrack (BA5, BV5), 12\/2014–12\/2020, AWD and VW Golf 8 Alltrack (CG5), from 11\/2020, AWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0 513 029 JB, 5QM 513 029 AH.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615531938116,"sku":"19-274195","price":70.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-274195.jpg?v=1776007421"},{"product_id":"bilstein-shock-absorber-19-275277","title":"Bilstein B4 Shock Absorbers 19-275277","description":"\u003cp\u003eBilstein shock absorber — Bilstein Shock Absorber 19-275277\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Audi, VW and Škoda, including VW Golf 7 (5G1, BQ1, BE1, BE2) and Audi Q2 (GAB, GAG) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5QN513049BL, 5QN513049BJ, 5QN513049BG, 5QN513049BF, 5QN513049BC.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615532429636,"sku":"19-275277","price":72.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/19-275277.jpg?v=1776007422"},{"product_id":"bilstein-shock-absorber-20-238988","title":"Bilstein Shock Absorbers 20-238988","description":"\u003cp\u003eBilstein Rear (universal) shock absorber — Bilstein Shock Absorber 20-238988\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Rear (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 9 models from SEAT, VW and Škoda, including SEAT Leon 3 (5F1) and SEAT Leon 3 ST (5F8) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0513045BB, 5Q0513045AN, 5Q0513045AE, 5Q0513045CG, 5Q0513045BD.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the rear axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615566672196,"sku":"20-238988","price":451.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/20-238988_1.jpg?v=1776084856"},{"product_id":"bilstein-shock-absorber-20-278731","title":"Bilstein Shock Absorbers 20-278731","description":"\u003cp\u003eBilstein B4 OEM Replacement shock absorber for 7 models from SEAT, VW and Škoda — Bilstein Shock Absorber 20-278731.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B4 OEM Replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from SEAT, VW and Škoda, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0 512 037 L, 5Q0 513 045 BB, 5Q0 513 119 L, 5Q0 513 119 N, 5Q0513045AE.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615567360324,"sku":"20-278731","price":469.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/20-278731_1.jpg?v=1779441326"},{"product_id":"bilstein-shock-absorber-22-230522","title":"Bilstein B4 Shock Absorbers 22-230522","description":"\u003cp\u003eBilstein Front (universal) shock absorber — Bilstein Shock Absorber 22-230522\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 18 models from Audi, SEAT, VW and Škoda, including Audi A3 (8V1, 8VK) and Audi A3 Sportback (8VA, 8VF) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0413023EB, 5Q0 413 023 CP, 5Q0 413 023 DB, 5Q0 413 023 FK, 5Q0 413 023 FR.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615616119108,"sku":"22-230522","price":77.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-230522.jpg?v=1776007444"},{"product_id":"bilstein-shock-absorber-22-230539","title":"Bilstein B4 Shock Absorbers 22-230539","description":"\u003cp\u003eBilstein Front (universal) shock absorber — Bilstein Shock Absorber 22-230539\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Oil Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom eye\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 12 models from Audi, VW and Škoda, including Audi A3 (8V1, 8VK) and Škoda Octavia 3 (5E3, NL3, NR3) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0 413 031 CH, 3Q0413031AM, 3Q0413031AQ, 3Q0413031BF, 3Q0413031BJ.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom eye. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615616250180,"sku":"22-230539","price":77.23,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-230539.jpg?v=1776007444"},{"product_id":"bilstein-shock-absorber-22-266750","title":"Bilstein B4 Shock Absorbers 22-266750","description":"\u003cp\u003eBilstein Front (universal) shock absorber — Bilstein Shock Absorber 22-266750\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits Audi A3 (8V1, 8VK), 04\/2012–10\/2020 and VW Golf 7 (5G1, BQ1, BE1, BE2), 08\/2012–10\/2021, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 8V0413031S, 5Q0 413 031 FR, 8V0 413 031 S, 8V0 413 031, 8V0 413 031 R.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615642399044,"sku":"22-266750","price":77.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-266750.jpg?v=1776007454"},{"product_id":"bilstein-shock-absorber-22-274182","title":"Bilstein B4 Shock Absorbers 22-274182","description":"\u003cp\u003eBilstein Front (universal) shock absorber — Bilstein Shock Absorber 22-274182\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Bottom plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 4 models from Audi and VW, including VW Golf 7 Alltrack (BA5, BV5) and Audi A3 Sportback (8YA, 8YF) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0 413 031 GJ, 5QM 413 031 T.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is bottom plate. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615644266820,"sku":"22-274182","price":98.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-274182.jpg?v=1776007453"},{"product_id":"bilstein-shock-absorber-23-238978","title":"Bilstein Shock Absorbers 23-238978","description":"\u003cp\u003eBilstein Front (universal) shock absorber — Bilstein Shock Absorber 23-238978\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting Position:\u003c\/strong\u003e Front (universal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping System:\u003c\/strong\u003e Twin-Tube\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Top pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB4 is Bilstein's OE-replacement damper: valving matched to the car's original specification so ride height, body control and comfort return to how the vehicle left the factory. Nothing is uprated and nothing is lowered — it is the right choice when worn dampers have made the car float, bounce or wander, and you want factory behaviour back rather than a firmer setup. This unit is twin-tube, the construction Bilstein specifies where the original fitment used it.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 25 models from Audi, CUPRA, SEAT, VW and Škoda, including SEAT Leon 3 (5F1) and SEAT Leon 3 ST (5F8) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 3Q0 413 032 A, 5Q0 413 031 F, 5Q0 413 031 FK, 5Q0 413 031 FM, 5Q0 413 031 GM.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B4 damper unit for the front axle (either side) — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Mounting is top pin. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615671234884,"sku":"23-238978","price":425.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/23-238978.jpg?v=1776007466"},{"product_id":"bilstein-shock-absorber-20-282165","title":"Bilstein Shock Absorbers 20-282165","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 6 models from SEAT, VW and Škoda — Bilstein Shock Absorber 20-282165.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 6 models from SEAT, VW and Škoda, including SEAT Leon 3 (5F1) and Škoda Octavia 3 (5E3, NL3, NR3) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615711605060,"sku":"20-282165","price":579.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/20-282165_1.jpg?v=1779441326"},{"product_id":"bilstein-shock-absorber-23-254343","title":"Bilstein Shock Absorbers 23-254343","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 25 models from Audi, CUPRA, SEAT and 2 other makes — Bilstein Shock Absorber 23-254343.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 25 models from Audi, CUPRA, SEAT, VW and Škoda, including SEAT Leon 3 (5F1) and SEAT Leon 3 ST (5F8) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 2Q0 413 032 BL, 3Q0 413 031 AK, 3Q0 413 031 BB, 3Q0 413 031 BE, 3Q0 413 032, 3Q0 413 032 A and 16 more.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615739425092,"sku":"23-254343","price":473.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/23-254343_1.jpg?v=1776084365"},{"product_id":"bilstein-shock-absorber-24-229883","title":"Bilstein B6 Shock Absorbers 24-229883","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 18 models from Audi, CUPRA, SEAT and 2 other makes — Bilstein Shock Absorber 24-229883.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 18 models from Audi, CUPRA, SEAT, VW and Škoda, including Audi A3 (8V1, 8VK) and Audi A3 Sportback (8VA, 8VF) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5QM 513 049, 5QM 513 049 P.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615812825412,"sku":"24-229883","price":159.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-229883_1.jpg?v=1776083990"},{"product_id":"bilstein-shock-absorber-24-229920","title":"Bilstein B6 Shock Absorbers 24-229920","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 18 models from Audi, CUPRA, SEAT and 2 other makes — Bilstein Shock Absorber 24-229920.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 18 models from Audi, CUPRA, SEAT, VW and Škoda, including Audi A3 (8V1, 8VK) and Audi A3 Sportback (8VA, 8VF) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615812890948,"sku":"24-229920","price":164.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/24-229920_1.jpg?v=1776083990"},{"product_id":"bilstein-shock-absorber-35-229865","title":"Bilstein B6 Shock Absorbers 35-229865","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 24 models from Audi, CUPRA, SEAT and 2 other makes — Bilstein Shock Absorber 35-229865.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 24 models from Audi, CUPRA, SEAT, VW and Škoda, including Audi A3 (8V1, 8VK) and Audi A3 Sportback (8VA, 8VF) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0 413 023 EP, 5Q0 413 023 EQ, 5Q0 413 023 ER, 5Q0 413 023 FH, 5Q0 413 023 FJ, 5Q0 413 023 FK and 4 more.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615848149316,"sku":"35-229865","price":233.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-229865_1.jpg?v=1776083717"},{"product_id":"bilstein-shock-absorber-35-229872","title":"Bilstein B6 Shock Absorbers 35-229872","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 32 models from Audi, CUPRA, Ford and 3 other makes — Bilstein Shock Absorber 35-229872.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 32 models from Audi, CUPRA, Ford, SEAT, VW and Škoda, including Audi A3 (8V1, 8VK) and Audi A3 Sportback (8VA, 8VF) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0413023GG, 5Q0413023DA, 5Q0 413 023 CP, 5Q0 413 023 DA, 5Q0 413 023 EB, 5Q0 413 023 GG and 18 more.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615848214852,"sku":"35-229872","price":233.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-229872_1_1.jpg?v=1776083716"},{"product_id":"bilstein-shock-absorber-35-229902","title":"Bilstein B8 Shock Absorbers 35-229902","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 24 models from Audi, CUPRA, SEAT and 2 other makes — Bilstein Shock Absorber 35-229902.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 24 models from Audi, CUPRA, SEAT, VW and Škoda, including Audi A3 (8V1, 8VK) and Audi A3 Sportback (8VA, 8VF) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615848247620,"sku":"35-229902","price":238.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-229902_1_1.jpg?v=1776083716"},{"product_id":"bilstein-shock-absorber-35-229919","title":"Bilstein B8 Shock Absorbers 35-229919","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 30 models from Audi, CUPRA, SEAT and 2 other makes — Bilstein Shock Absorber 35-229919.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB8 is the shortened damper. Its body and stroke are cut down so it works correctly on a car already lowered by sport springs — fitting a full-length damper to a lowered car runs it out of travel and destroys the ride. B8 restores proper travel, with performance valving to match. Pair it with lowering springs; it is not intended for standard ride height.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 30 models from Audi, CUPRA, SEAT, VW and Škoda, including Audi A3 (8V1, 8VK) and Audi A3 Sportback (8VA, 8VF) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 8S0413031D, 8S0 413 031 A, 8S0 413 031 B, 8S0 413 031 D, 8S7 413 031 E, 8S7413031E and 1 more.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B8 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615848313156,"sku":"35-229919","price":238.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-229919_1.jpg?v=1779441561"},{"product_id":"bilstein-shock-absorber-35-273806","title":"Bilstein B6 Shock Absorbers 35-273806","description":"\u003cp\u003eBilstein B6 Performance shock absorber for 7 models from CUPRA, VW and Škoda — Bilstein Shock Absorber 35-273806.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Gas Pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e B6 Performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB6 is the uprated damper for a car kept at standard ride height. Bilstein firms up the valving over the OE curve, so body roll settles sooner, the nose dives less under braking and the car tracks straighter at speed. You feel more of the road surface than with B4, which is the point — it is a handling upgrade, not a comfort one, and it needs no springs to work.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from CUPRA, VW and Škoda, including VW Golf 7 Alltrack (BA5, BV5) and VW Passat B8 Alltrack (3G5, CB5) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B6 damper unit — a single shock absorber, not a pair and not an axle set. Order two to do an axle, four for the whole car. Bump stops, dust covers, top mounts and fixings are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes correct installation, the correct tightening torques, and serviceable bump stops and dust covers. A damper run without its protection parts will be scored by road grit — that is wear, not a defect. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615851426116,"sku":"35-273806","price":225.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/35-273806_1.jpg?v=1779441569"},{"product_id":"bilstein-suspension-set-46-220318","title":"Bilstein B12 Suspension Set 46-220318","description":"\u003cp\u003eBilstein B12 Suspension set for SEAT Leon 3 Van Hatchback and VW Golf 7 Van — Bilstein Suspension set 46-220318.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.02 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits SEAT Leon 3 Van Hatchback (5F1), 09\/2012–08\/2020, FWD and VW Golf 7 Van (5G1, BQ1), 08\/2012–08\/2020, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615895630148,"sku":"46-220318","price":1260.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/46-220318_1.jpg?v=1776083570"},{"product_id":"bilstein-suspension-set-46-261175","title":"Bilstein B12 Suspension Set 46-261175","description":"\u003cp\u003eBilstein B12 Suspension set for SEAT Leon 3 Van Hatchback and VW Golf 7 Van — Bilstein Suspension set 46-261175.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.86 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits SEAT Leon 3 Van Hatchback (5F1), 09\/2012–08\/2020, FWD and VW Golf 7 Van (5G1, BQ1), 08\/2012–08\/2020, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615907656004,"sku":"46-261175","price":1254.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/46-261175_1.jpg?v=1779109193"},{"product_id":"bilstein-suspension-set-46-261236","title":"Bilstein B12 Suspension Set 46-261236","description":"\u003cp\u003eBilstein B12 Suspension set for SEAT Leon 3 Van Hatchback and VW Golf 7 Van — Bilstein Suspension set 46-261236.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.15 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits SEAT Leon 3 Van Hatchback (5F1), 09\/2012–08\/2020, FWD and VW Golf 7 Van (5G1, BQ1), 08\/2012–08\/2020, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615907885380,"sku":"46-261236","price":1260.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/46-261236_1.jpg?v=1779109197"},{"product_id":"bilstein-suspension-set-46-261250","title":"Bilstein B12 Suspension Set 46-261250","description":"\u003cp\u003eBilstein B12 Suspension set for GOLF VII Van (5G1) — Bilstein Suspension set 46-261250.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.44 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB12 is a matched kit rather than a parts list: Bilstein performance dampers supplied with lowering springs that were tuned against those exact dampers. Expect a moderate drop, flatter cornering and body control that stays composed because spring rate and damping were developed as one system. It avoids the usual mismatch of buying springs and dampers from different sources.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits SEAT Leon 3 Van Hatchback (5F1), 09\/2012–08\/2020, FWD and VW Golf 7 Van (5G1, BQ1), 08\/2012–08\/2020, FWD — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B12 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615907950916,"sku":"46-261250","price":1254.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/46-261250_1.jpg?v=1779109197"},{"product_id":"bilstein-suspension-set-47-229945","title":"Bilstein B14 Suspension Set 47-229945","description":"\u003cp\u003eBilstein B14 Suspension set for 8 models from Audi, CUPRA, SEAT and 1 other make — Bilstein Suspension set 47-229945.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 26.50 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB14 is a height-adjustable coilover. Threaded damper bodies let you set ride height anywhere inside a tested range, so you dial in the stance rather than accept whatever a fixed spring gives you. Damping is factory-set and firm, tuned for predictable road behaviour. It is the step up from a spring-and-damper kit when you want control over how low the car actually sits.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 8 models from Audi, CUPRA, SEAT and VW, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B14 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615941210436,"sku":"47-229945","price":1645.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/47-229945_1.jpg?v=1776083488"},{"product_id":"bilstein-suspension-set-47-229952","title":"Bilstein B14 Suspension Set 47-229952","description":"\u003cp\u003eBilstein B14 Suspension set for 8 models from Audi, CUPRA, SEAT and 1 other make — Bilstein Suspension set 47-229952.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.53 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB14 is a height-adjustable coilover. Threaded damper bodies let you set ride height anywhere inside a tested range, so you dial in the stance rather than accept whatever a fixed spring gives you. Damping is factory-set and firm, tuned for predictable road behaviour. It is the step up from a spring-and-damper kit when you want control over how low the car actually sits.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 8 models from Audi, CUPRA, SEAT and VW, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B14 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615941243204,"sku":"47-229952","price":1645.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/47-229952_1.jpg?v=1776083487"},{"product_id":"bilstein-suspension-set-47-251588","title":"Bilstein B14 Suspension Set 47-251588","description":"\u003cp\u003eBilstein B14 Suspension set for 12 models from Audi, CUPRA, SEAT and 2 other makes — Bilstein Suspension set 47-251588.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.07 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB14 is a height-adjustable coilover. Threaded damper bodies let you set ride height anywhere inside a tested range, so you dial in the stance rather than accept whatever a fixed spring gives you. Damping is factory-set and firm, tuned for predictable road behaviour. It is the step up from a spring-and-damper kit when you want control over how low the car actually sits.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 12 models from Audi, CUPRA, SEAT, VW and Škoda, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B14 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615942095172,"sku":"47-251588","price":1645.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/47-251588_1.jpg?v=1776083478"},{"product_id":"bilstein-suspension-set-47-254954","title":"Bilstein B14 Suspension Set 47-254954","description":"\u003cp\u003eBilstein B14 Suspension set for 8 models from Audi, CUPRA, SEAT and 1 other make — Bilstein Suspension set 47-254954.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 21.56 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB14 is a height-adjustable coilover. Threaded damper bodies let you set ride height anywhere inside a tested range, so you dial in the stance rather than accept whatever a fixed spring gives you. Damping is factory-set and firm, tuned for predictable road behaviour. It is the step up from a spring-and-damper kit when you want control over how low the car actually sits.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 8 models from Audi, CUPRA, SEAT and VW, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B14 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615942160708,"sku":"47-254954","price":1645.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/47-254954_1.jpg?v=1776083476"},{"product_id":"bilstein-suspension-set-48-230032","title":"Bilstein B16 Suspension Set 48-230032","description":"\u003cp\u003eBilstein B16 Suspension set for 8 models from Audi, CUPRA, SEAT and 1 other make — Bilstein Suspension set 48-230032.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24.80 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB16 adds damping adjustment to the coilover platform. Ride height is set on the threaded body as on B14, and damping force is then adjusted separately, so the car can be softened for daily roads and firmed up for a track day without changing parts. It suits drivers who want one setup that covers both and are willing to spend time tuning it.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 8 models from Audi, CUPRA, SEAT and VW, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B16 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56615947338052,"sku":"48-230032","price":2780.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/48-230032_1.jpg?v=1776083414"},{"product_id":"bilstein-suspension-strut-support-bearing-12-243945","title":"Bilstein Strut Support Bearing 12-243945","description":"\u003cp\u003eBilstein B1 Suspension strut support bearing for 19 models from Audi, SEAT, VW and 1 other make — Bilstein Suspension strut support bearing 12-243945.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 952\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.86 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 19 models from Audi, SEAT, VW and Škoda, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0412331D, 5Q0 412 331 C, 5Q0 412 331 D\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B1 strut support bearing — a single corner. Order two to do an axle. The strut, spring and top nut are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the bearing is fitted with the top nut torqued to specification and the strut re-assembled correctly. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618290086212,"sku":"12-243945","price":33.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/bilstein-strut-support-bearing_100.jpg?v=1786996793"},{"product_id":"bilstein-suspension-strut-support-bearing-12-273096","title":"Bilstein Strut Support Bearing 12-273096","description":"\u003cp\u003eBilstein B1 Suspension strut support bearing for 7 models from Audi, SEAT and VW — Bilstein Suspension strut support bearing 12-273096.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 40 169 952\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.18 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB1 is Bilstein's suspension service range — the protection kits, bump stops, dust covers and strut support bearings that sit around the damper. They are wear parts: a collapsed bump stop or split dust cover lets grit onto the piston rod and will kill a new damper early. Built to the same standards as the dampers they protect, and worth replacing at the same time.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 7 models from Audi, SEAT and VW, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above. \u003cstrong\u003eOEM References:\u003c\/strong\u003e 5Q0412331D, 5Q0 412 331 D, 5Q0 412 331 D S2\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne Bilstein B1 strut support bearing — a single corner. Order two to do an axle. The strut, spring and top nut are not included.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the bearing is fitted with the top nut torqued to specification and the strut re-assembled correctly. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618293985604,"sku":"12-273096","price":33.4,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/bilstein-strut-support-bearing_188.jpg?v=1786997085"},{"product_id":"bilstein-suspension-set-48-251570","title":"Bilstein B16 Suspension Set 48-251570","description":"\u003cp\u003eBilstein B16 Suspension set for 12 models from Audi, CUPRA, SEAT and 2 other makes — Bilstein Suspension set 48-251570.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.88 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB16 adds damping adjustment to the coilover platform. Ride height is set on the threaded body as on B14, and damping force is then adjusted separately, so the car can be softened for daily roads and firmed up for a track day without changing parts. It suits drivers who want one setup that covers both and are willing to spend time tuning it.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 12 models from Audi, CUPRA, SEAT, VW and Škoda, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B16 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618600825156,"sku":"48-251570","price":2720.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/48-251570_1.jpg?v=1776083393"},{"product_id":"bilstein-suspension-set-48-254960","title":"Bilstein B16 Suspension Set 48-254960","description":"\u003cp\u003eBilstein B16 Suspension set for 8 models from Audi, CUPRA, SEAT and 1 other make — Bilstein Suspension set 48-254960.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 23.59 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eB16 adds damping adjustment to the coilover platform. Ride height is set on the threaded body as on B14, and damping force is then adjusted separately, so the car can be softened for daily roads and firmed up for a track day without changing parts. It suits drivers who want one setup that covers both and are willing to spend time tuning it.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 8 models from Audi, CUPRA, SEAT and VW, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein B16 kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618601316676,"sku":"48-254960","price":2780.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/48-254960_1.jpg?v=1776083389"},{"product_id":"bilstein-suspension-set-49-255874","title":"Bilstein Suspension Set 49-255874","description":"\u003cp\u003eBilstein Suspension set for 15 models from Audi, CUPRA, SEAT and 2 other makes — Bilstein Suspension set 49-255874.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eA Bilstein suspension set supplied as a matched front-and-rear kit for this application, with the components specified in the table above.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 15 models from Audi, CUPRA, SEAT, VW and Škoda, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618603708740,"sku":"49-255874","price":3534.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/49-255874_1.jpg?v=1776083375"},{"product_id":"bilstein-suspension-set-49-279641","title":"Bilstein Suspension Set 49-279641","description":"\u003cp\u003eBilstein Suspension set for 5 models from SEAT and VW — Bilstein Suspension set 49-279641.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e BILSTEIN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHS\/CN Code:\u003c\/strong\u003e 87 088 035\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 27.00 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance\u003c\/h3\u003e\n\u003cp\u003eA Bilstein suspension set supplied as a matched front-and-rear kit for this application, with the components specified in the table above.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eFits 5 models from SEAT and VW, including SEAT Leon 3 (5F1) and SEAT Leon 3 Van Hatchback (5F1) — see the full list below. Verify fitment using the vehicle compatibility checker above.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cp\u003eOne complete Bilstein kit for this vehicle — dampers and matched springs for both axles, supplied together so the damping and spring rates are the pair they were developed as. Top mounts, bump stops and fixings are re-used from the vehicle unless the specification table states otherwise.\u003c\/p\u003e\n\u003ch3\u003eWarranty\u003c\/h3\u003e\n\u003cp\u003eBacked by Bilstein's manufacturer warranty against defects in materials and workmanship. Cover assumes the kit is fitted complete and as supplied. Mixing these parts with dampers or springs from another set puts the load outside what the kit was tuned for and is not covered. As an official reseller in the EU, Suspengo also handles your statutory conformity rights on this purchase — contact us first and we deal with the manufacturer.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":56618604003652,"sku":"49-279641","price":3534.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/files\/22-147530_1_e27a5db9-75fb-4682-874f-333d7cfc9e17.jpg?v=1781430366"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0963\/9664\/0580\/collections\/volkswagen-golf-mk7-white-stage.jpg?v=1790240342","url":"https:\/\/suspengo.com\/collections\/suspension-vw-golf-mk7\/series-b12.oembed","provider":"Suspengo","version":"1.0","type":"link"}