Skip to content

News

eibach

Eibach Pro-Kit vs Sportline: Which Lowering Springs?

Suspengo Technical Team

By the Suspengo Technical Team · Published 2026-10-12 · Last reviewed 2026-10-12 Quick answer: Choose Pro-Kit for a 20–35 mm drop with ABE/TÜV type approval and a ride quality close to OEM. Choose Sportline for a 30–55 mm drop with a firmer, more sporting character on smooth roads. If you are replacing dampers at the same time — or your OEM shocks have high mileage — consider the Eibach B12 Pro-Kit, which pairs Pro-Kit springs with Bilstein B8 Performance Plus dampers in a single tested set. Browse the full Eibach range → Eibach makes two progressive lowering springs for most European road cars. Both carry the Eibach name, both fit without modifications, and at a glance the spec sheets look confusingly similar. The difference matters — not just for stance, but for how the car behaves on every road you drive. This comparison covers the four variables that separate them: lowering amount, spring rate, ride quality, and homologation status. How Much Does Each Spring Lower the Car? Lowering figures vary by application, but the typical ranges are: Spring Typical front drop Typical rear drop Character Pro-Kit 20–30 mm 15–25 mm Sport-comfort Sportline 30–45 mm 25–50 mm Sport-firm For the exact figures on your car and model year, see the Eibach ranges guide. What Is the Difference in Ride Quality? Both springs use Eibach's progressive winding — the coils are not evenly spaced, so the effective spring rate increases as the suspension compresses. This makes the ride more forgiving over small bumps than a linear spring of the same average rate. The Pro-Kit's spring rate is typically 15–25% stiffer than OEM. On most road cars this is barely perceptible to passengers. Body roll reduces, turn-in sharpens, and the car sits lower — but on a smooth motorway, a non-driver would struggle to identify the change. The Sportline runs approximately 35–55% stiffer than OEM. On poor urban surfaces, the firmer calibration is noticeable. Road imperfections transmit more directly to the cabin. On smooth A-roads and motorways the character is engaging without being uncomfortable. The Sportline is not a track spring — it is a road spring with a sporting bias, not a touring one. Does the ABE/TÜV Certificate Matter? For road use in Germany and for many EU registration processes, yes. The Pro-Kit carries an ABE (Allgemeine Betriebserlaubnis) — a general operating permit recognised across Germany — which means fitting the springs does not invalidate vehicle registration or insurance without additional sign-off, provided the installation follows Eibach's fitment specification. The Sportline also carries TÜV type certification for most applications. Both are road-legal on their own merits. The practical difference: if your country or insurer requires documented homologation for any modified spring, both options satisfy that requirement. You are not choosing between legal and illegal — you are choosing between a 25 mm drop and a 40 mm drop. Can You Fit Either Spring on Standard Shocks? Technically, yes. In practice, the standard shock absorber was designed for OEM ride height. Once you lower the car beyond roughly 25–30 mm, the damper sits further into its compression stroke at rest, leaving less bump travel before it strikes the bump stop — and the ride becomes harsh and unpredictable. For Pro-Kit fitments at the lower end of the drop range (under 25 mm), some cars retain adequate bump travel on OEM shocks. For Sportline fitments — which regularly exceed 35 mm — fitting a shortened performance damper is not optional if you want correct handling. This is the main reason the Eibach B12 Pro-Kit exists. It combines Pro-Kit springs with Bilstein B8 Performance Plus dampers — shortened and valve-tuned for Pro-Kit spring rates — in a single tested package. If your OEM shocks have significant mileage on them, replacing the complete combination at once typically costs less than replacing springs now and dampers in six months. Shop Eibach B12 Pro-Kit → Which Eibach Spring Is Right for Your Use Case? Choose Pro-Kit if: You want a visibly lowered stance without a noticeably firmer ride on daily roads Your car is a practical daily driver shared with passengers who value comfort You need documented ABE homologation for German roads or insurance purposes You are keeping your OEM shocks and your current drop will be under 25 mm Choose Sportline if: You want a more aggressive lowered stance (30–50 mm) and are fitting shortened dampers Driving character matters more than absolute ride comfort on poor surfaces The car is primarily used on smoother roads and motorways Eliminating wheel gap is a priority for appearance Choose the B12 Pro-Kit if: You are replacing OEM shocks at the same time — through age, wear, or upgrade You want a factory-matched combination without sourcing springs and dampers separately You prefer one purchase, one fitment appointment, and one warranty process if needed Where to See the Full Eibach Range For a complete breakdown of every Eibach spring and kit available for your car — including Pro-Kit, Sportline, B12 Pro-Kit, and Eibach Multi-Pro-Kit adjustable coilovers — see the Eibach ranges guide. Ready to choose? Shop the full Eibach range →

Read more

News

bilstein b8

Can You Use Stock Shocks With Lowering Springs?

Suspengo Technical Team
The best shocks for lowering springs
Bilstein B8

The Best Shocks for Lowering Springs (And Why Most Get It Wrong)

Suspengo Technical Team
Is it time to replace your shock absorbers? A 5-minute check
diagnostics

Is It Time to Replace Your Shock Absorbers? The 5-Minute Check

Suspengo Technical Team
Uneven tyre wear: what your suspension tells you
alignment

Uneven Tyre Wear: What Your Suspension Is Telling You

Suspengo Technical Team
How often should shock absorbers be replaced?
maintenance

How Often Should Shock Absorbers Be Replaced?

Suspengo Technical Team
Why shock absorbers are replaced in pairs
axle pairs

Front vs rear shock absorbers: why you replace in pairs

Suspengo Technical Team
Strut top mounts: replace them with the damper
diagnostics

Strut top mounts: when to replace them with the damper

Suspengo Technical Team
How to read a Bilstein part number
b12

How to read a Bilstein part number

Suspengo Technical Team
Bilstein B12 or B14: which kit suits you?
b12

Bilstein B12 vs B14: Which Kit Matches Your Build?

Suspengo Technical Team
Strut bearing failure: symptoms and fix
diagnostics

Strut Bearing Failure: Symptoms and Fix

Suspengo Technical Team
Premium Parts Only
30 Days Free Returns
250,000+ Shock Absorbers Sold